journal article·2005-11

Thermal properties and interfacial reaction between the Sn-9Zn-xAg lead-free solders and Cu substrate

Tao-Chih Chang, Moo-Chin Wang, Min-Hsiung Hon

Publisher page

Abstract

The thermal properties and interfacial reaction between the Sn-9Zn-xAg lead-free solders and Cu substrate, such as solidus and liquidus temperatures, heat of fusion, intermetallic compounds, and adhesion strength, have been investigated. Two endothermic peaks appear in the DSC curve when the Ag content in the Sn-9Zn-xAg solder alloy is above 1.5 wt pct. The solidus temperatures of the Sn-9Zn-xAg solder alloys are around 197 °C, but the liquidus temperatures decrease from 225.3 °C to 221.7 °C and 223.6 °C with increasing the Ag content in the solder alloy from 1.5 to 2.5 and 3.5 wt pct, respectively. Three intermetallic compounds, namely, Cu6Sn5, Cu5Zn8, and Ag3Sn are observed at the Sn-9Zn-xAg/Cu interface. The Cu5Zn8 is formed close to the Cu substrate, Ag3Sn is adjacent to it, and Cu6Sn5 is nearest the Sn-9Zn-1.5Ag solder alloys. A bi-structural Cu6Sn5 layer with hexagonal η-Cu6Sn5 and monoclinic η′-Cu6Sn5 is found at the Sn-9Zn-1.5Ag/Cu interface due to Ag dissolution. A maximum adhesion strength of 10.7±0.8 MPa is obtained at the Sn-9Zn-2.5Ag/Cu interface as soldered at 250 °C for 30 seconds.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. K.S. Subramanian, V.S. Sastri, M. Elboujdaini J.W. Connor, and A.B.C. Davey: Wat. Res., 1995, vol. 29 (8), pp. 1827–36.10.1016/0043-1354(95)00005-6 ↗
2. G. Ghosh: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1481–94.10.1007/s11661-999-0085-x ↗
3. L.J. Turbini, W.R. Bent, and W.J. Ready: SMTA Int., Chicago, IL, Sept. 2000, Surface Mount Technology Association, Edina, MN, 2000, pp. 20–24.
4. Comprehensive Reviews of Lead in the Environment under TSCA, 56FR, Environmental Protection Agency, Washington, DC, May 13, 1991, pp. 22096–22098.
5. K. Ninmo: SMTA Int., San Jose, CA, Sept. 1999, Surface Mount Technology Association, Edina, MN, 2000, p. 13.
6. M.E. Loomans and M.E. Fine: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1155–62.10.1007/s11661-000-0111-5 ↗
7. S.W. Chen, C.C. Lin, and C.M. Chen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1965–72.10.1007/s11661-998-0022-4 ↗
8. M. McCormack and S. Jin: J. Electron. Mater., 1994, vol. 23, pp. 687–90.10.1007/BF02653357 ↗
9. M. Abtew and G. Selvaduray: Mater. Sci. Eng., 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
10. K.J.R. Wassink and M.M.F. Verguld: Manufacturing Techniques for Surface Mounted Assemblies, Electrochemical Publications Ltd., GB-Port Erin, British Isles, 1995, p. 17.
11. A.C.K. So and Y.C. Chan: IEEE Trans. CPMT-B, 1996, vol. 19 (3), pp. 661–68.
12. R.E. Pratt, E.I. Stromswold, and D.J. Quesnel: J. Electron. Mater., 1994, vol. 23, pp. 375–82.10.1007/BF02671217 ↗
13. S.F. Dirnfeld and J.J. Ramon: Welding J., 1990, Oct., pp. 373s–377s.
14. R.J. Klein Wassink: Soldering in Electronics, 2nd ed., Electrochemical Publications Ltd., GB-Port Erin, British Isles, 1989, p. 302.
15. F.G. Yost, F.M. Hosking, and D.R. Frear: The Mechanics of Solder Alloy Wetting and Spreading, Van Nostrand Reinhold, New York, NY, 1993, p. 12.
16. W.K. Choi, S.K. Kang, and D.Y. Shih: J. Electron. Mater., 2002, vol. 31, pp. 1283–91.10.1007/s11664-002-0022-x ↗
17. S.P. Yu, C.L. Liao, M.H. Hon, and M.C. Wang: J. Mater. Sci., 2000, vol. 35, pp. 1–8.10.1023/A:1004734725783 ↗
18. S.M. Chou, T.C. Chang, M.H. Hon, and M.C. Wang: Proc. IMAPS Taiwan Technical Symp. 2001, Hsinchu, Taiwan, Apr. 27, 2001, pp. 240–51.
19. Y.L. Tsai, W.S. Hwang, and H.S. Wang: J. Mater. Sci. Eng., 2002, vol. 34, pp. 135–43 (in Chinese).
20. K.L. Lin, F.C. Chung, and T.P. Liu: Mater. Chem. Phys., 1988, vol. 53, pp. 55–59.10.1016/S0254-0584(97)02062-2 ↗
21. P.T. Vianco and J.A. Rejent: J. Electron. Mater., 1999, vol. 28, pp. 1127–37.10.1007/s11664-999-0250-4 ↗
22. S.H. Huh, K.S. Kim, and K. Suganuma: Mater. Trans., 2001, vol. 42, pp. 739–44.10.2320/matertrans.42.739 ↗
23. J.M. Song, G.F. Lan, T.S. Lui, and L.H. Chen: Scripta Mater., 2003, vol. 48, pp. 1047–51.10.1016/S1359-6462(02)00647-4 ↗
24. T.C. Chang, M.C. Wang, and M.H. Hon: Mater. Trans., 2004, vol. 45, pp. 1–8.
25. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley Publishing Company, 1978, p. 284.
26. S.P. Yu, H.J. Lin, M.H. Hon, and M.C. Wang: J. Mater. Sci.: Mater. Electron., 2000, vol. 11, pp. 461–71.10.1023/A:1008960316695 ↗
27. K.L. Lin and C.L. Shih: J. Electron. Mater., 2003, vol. 32, pp. 95–100.10.1007/s11664-003-0242-8 ↗
28. T.Y. Lee, W.J. Choi, and K.N. Tu: J. Mater. Res., 2002, vol. 17, pp. 291–301.10.1557/JMR.2002.0042 ↗
29. A.S. Zuruzi, C.H. Chiu, and S.K. Lahiri: J. Appl. Phy., 1999, vol. 86, pp. 4916–21.10.1063/1.371460 ↗
30. K. Suganuma and Y. Nakamura: J. Jpn. Inst. Met., 1995, vol. 59, pp. 1299–305.10.2320/jinstmet1952.59.12_1299 ↗
31. H.M. Lee, S.W. Yoon, and B.J. Lee: J. Electron. Mater., 1998, vol. 27, pp. 1161–66.10.1007/s11664-998-0065-8 ↗
32. J.H. Lee, J.H. Park, Y.H. Lee, Y.S. Kim, and D.H. Shin: J. Mater. Res., 2001, vol. 16, pp. 1227–30.10.1557/JMR.2001.0169 ↗
33. K.N. Tu, F. Ku, and T.Y. Lee: J. Electron. Mater., 2001, vol. 30, pp. 1129–32.10.1007/s11664-001-0139-3 ↗
34. T.C. Chang, M.C. Wang, and M.H. Hon: J. Alloys Compounds, 2003, vol. 352, pp. 168–74.10.1016/S0925-8388(02)01122-2 ↗
35. C. Fairhurst and J. Cohen: J. Acta Crystallogr., Sec. B, 1972, vol. 28, pp. 371–78.10.1107/S0567740872002432 ↗
36. J.K. Brandon: J. Acta Crystallogr., Sec. B, 1974, vol. 30, pp. 1412–17.10.1107/S0567740874004997 ↗
37. P.T. Vianco, K.L. Erickson, and P.L. Hopkins: J. Electron. Mater., 1994, vol. 23, pp. 721–27.10.1007/BF02651365 ↗
38. T.C. Chang, M.C. Wang, and M.H. Hon: J. Cryst. Growth, 2003, vol. 252, pp. 401–12.10.1016/S0022-0248(02)02480-6 ↗
39. T.C. Chang, M.C. Wang, and M.H. Hon: J. Electron. Mater., 2003, vol. 32, pp. 516–22.10.1007/s11664-003-0136-9 ↗