Effect of Rolling and Subsequent Annealing on Microstructure, Microtexture, and Properties of an Experimental Duplex Stainless Steel
Source abstract
Abstract
A lean duplex stainless steel (LDSS) has been prepared with low-N content and processed by different thermo-mechanical schedules, similar to the industrial processing that comprised hot-rolling, cold-rolling, and annealing treatments. The microstructure developed in the present study on low-N LDSS has been compared to that of high-N LDSS as reported in the literature. As N is an austenite stabilizer, lower-N content reduced the stability of austenite and the austenite content in low-N LDSS with respect to the conventional LDSS. Due to low stability of austenite in low-N LDSS, cold rolling resulted in strain-induced martensitic transformation and the reversion of martensite to austenite during subsequent annealing contributed to significant grain refinement within the austenite regions. δ-ferrite grains in low-N LDSS, on the other hand, are refined by extended recovery mechanism. Initial solidification texture (mainly cube texture) within the δ-ferrite region finally converted into gamma-fiber texture after cold rolling and annealing. Although MS-brass component dominated the austenite texture in low-N LDSS after hot rolling and cold rolling, that even transformed into alpha-fiber texture after the final annealing. Due to the significant grain refinement and formation of beneficial texture within both austenite and ferrite, good combination of strength and ductility has been achieved in cold-rolled and annealed sample of low-N LDSS steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Y.L. Fang, Z.Y. Liu, G.D. Wang: Journal of Iron and Steel Research International, 2011, Vol.18, pp. 58-62.10.1016/S1006-706X(11)60051-4 ↗
2. J.O. Nilsson: Mater. Sci. Technol., 1992, Vol. 8 (8), pp. 685-700.10.1179/mst.1992.8.8.685 ↗
3. F. Dupoiron and J. P. Audouard: Scand. J. Metall., 1996, Vol. 25 (3), pp. 95-102.
4. Han Y, Zou D, Chen Z, Fan G, Zhang W (2011) Mater. Charact. 62:198–203.10.1016/j.matchar.2010.11.013 ↗
5. E. Evangelista, H.J. Mcqueen, M. Niewczas, M. Cabibbo: Canadian Metallurgical Quarterly, 2004, Vol. 43, pp. 339-354.10.1179/cmq.2004.43.3.339 ↗
6. G.W. Fan, J. Liu, P.D. Han, G.J. Qiao: Materials Science and Engineering A, 2009, Vol. 515, pp. 108–112.10.1016/j.msea.2009.02.022 ↗
7. H. Farnoush, A. Momeni, K. Dehgani, J. AghaZadehMohandesi, H. Keshmiri: Materials and Design, 2010, Vol. 31, pp. 220-226.10.1016/j.matdes.2009.06.028 ↗
8. A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson: Materials Science and Technology, 2007, Vol. 23, pp. 1478-1484.10.1179/174328407X239019 ↗
9. A.M.J. Junior, G.S. Reis, O. Balancin: Materials Science and Engineering A, 2011, Vol. 528, pp. 1259-1264.
10. S. Primig, K.S. Ragger, B. Buchmeyr: Materials Science Forum, 2014, Vol. 783-786, pp. 973-979.10.4028/www.scientific.net/MSF.783-786.973 ↗
11. R.Z. Wang, T.C. Lei: Scripta Metall. Mater., 1994, Vol. 31, pp. 1193-1196.10.1016/0956-716X(94)90575-4 ↗
12. C. Herrera, D. Ponge, D. Raabe: Steel Research International, 2008, Vol. 79, pp. 482-488.10.1002/srin.200806156 ↗
13. C. Herrera, D. Ponge, D. Raabe: Acta mater., 2011, Vol. 59, pp. 4653-4664.10.1016/j.actamat.2011.04.011 ↗
14. A. Iza-Mendia, A. Pin-Ol-Juez, J.J. Urcola, I. Gutie´rrez: Metall. and Mater. Trans. A, 1998, Vol. 29A, pp. 2975-2986.10.1007/s11661-998-0205-z ↗
15. O. Balancin, W.A.M. Hoffmann, J.J. Jonas: Metall. Mater. Trans. A, 2000, Vol. 31 A, pp. 1353-1364.10.1007/s11661-000-0254-4 ↗
16. A. Momeni, K. Dehghani: Materials Science and Engineering A, 2011, Vol. 528, pp. 1448-1454.10.1016/j.msea.2010.11.020 ↗
17. Momeni A, Dehghani K, Zhang XX (2012) J. Mater. Sci. 47:2966-2974.10.1007/s10853-011-6130-3 ↗
18. P. Cizek, B.P. Wynne, W.M. Rainforth: Journal of Microscopy, 2006, vol. 222, pp. 85-96.10.1111/j.1365-2818.2006.01576.x ↗
19. P. Cizek, B.P. Wynne: Materials Science and Engineering A, 1997, Vol. 230, pp. 88-94.10.1016/S0921-5093(97)00087-7 ↗
20. Y.L. Fang, Z.Y. Liu, W. Xue, H.M. Song, L.Z. Jiang: ISIJ International, 2010, Vol. 50, pp. 286-293.10.2355/isijinternational.50.286 ↗
21. Y. Liu, H. Yan, X. Wang, M. Yan: Materials Science and Engineering A, 2013, Vol. 575, pp. 41-47.10.1016/j.msea.2013.03.036 ↗
22. D.N. Zou, K. Wu, Y. Han, W. Zhang, B. Cheng, G.J. Qiao: Materials and Design, 2013, Vol. 51, pp. 975-982.10.1016/j.matdes.2013.04.065 ↗
23. W. Reick, M. Pohl and P. Fernando: ISIJ International, 1998, Vol. 38, No. 6, pp. 567-571.10.2355/isijinternational.38.567 ↗
24. J. Hamada and N. Ono: Materials Transactions, 2010, Vol. 51, No. 4, pp. 635-643.10.2320/matertrans.MG200907 ↗
25. L. F. Garfias-Mesias, J. M. Sykes and C. D. S. Tuck: Corrosion Science, 1996, Vol. 38(8), pp. 1319-1330.10.1016/0010-938X(96)00022-4 ↗
26. T. H. Chen, K. L. Weng and J. R. Yang: Materials Science and Engineering: A, 2002, Vol. 338(1), pp. 259-270.10.1016/S0921-5093(02)00093-X ↗
27. Y. S. Ahn, J. M. Kim & B. H. Jeong: Materials Science and Technology, 2002, Vol. 18, pp. 383-388.10.1179/026708302225001642 ↗
28. S.S.M. Tavares, M.R. da Silva, J.M. Pardal, H.F.G. Abreu and A.M. Gomes: Journal of Materials Processing Technology, 2006, Vol. 180, pp. 318–322.10.1016/j.jmatprotec.2006.07.008 ↗
29. G. Fargas, M. Anglada and A. Mateo: Journal of materials processing technology, 2009, Vol. 209(4), pp. 1770-1782.10.1016/j.jmatprotec.2008.04.026 ↗
30. I. Toor, P. J. Hyun and H. S. Kwon: Corrosion Science, 2008, Vol. 50, pp. 404–410.10.1016/j.corsci.2007.07.004 ↗
31. Hänninen H, Romu J, Ilola R, Tervo J, Laitinen A (2001) J. Mater. Process. Technol. 117:424-430.10.1016/S0924-0136(01)00804-4 ↗
32. H. Sieurin, R. Sandström, E.M. Westin: Metall Mater Trans. A, 1998, Vol. 37A, pp. 2975–2985.
33. P. Johansson, M. Liljas: Proc. 4th European Stainless Steel Sci. and Market Congress, Paris, France. 2002. pp. 1–26.
34. Z. Wei, J. Laizhu, H. Jincheng & S. Hongmei: Materials Characterization, 2009, Vol. 60(1), pp. 50-55.10.1016/j.matchar.2008.07.002 ↗
35. S.K. Ghosh, D. Mahata, R. Roychaudhuri and R. Mondal: Bull. Mater. Sci., 2012, Vol. 35, No. 5, pp. 839–846.10.1007/s12034-012-0353-z ↗
36. G. Fargas, N. Akdut, M. Anglada and A. Mateo: ISIJ International, 2008, Vol. 48, No. 11, pp. 1596–1602.10.2355/isijinternational.48.1596 ↗
37. A. Karmakar, M. Mandal, A. Mandal, Md. B. Sk, S. Mukherjee and D. Chakrabarti: Metallurgical and Materials Transactions A, 2016, Vol. 47, pp. 268–281.10.1007/s11661-015-3248-y ↗
38. L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu and J. Li: Materials Characterization, 2009, Vol. 60(12), pp. 1522-1528.10.1016/j.matchar.2009.08.009 ↗
39. A. Desestret, J. Charles: Les editions de Physique, Paris, 1993, p. 2006.
40. L. Duprez, B.C. De Cooman, N. Akdut: Steel Res., 2002, Vol. 73, pp. 531-538.10.1002/srin.200200024 ↗
41. E. Evangelista, H.J. McQueen, B. Verlinden, M. Barteri and G. DiCaprio: Proc. 3rd Europ. Conf. Stainless Steel’99, Science and Market, AIM, Milan. 1999. pp. 253–264.
42. J. Liu, G. Fan, P. Han, J. Liu, J. Gao and J. Yang: Materials Sci. Forum, 2009, Vol. 620-622, pp. 161-164.10.4028/www.scientific.net/MSF.620-622.161 ↗
43. A. Belyakov, Y. Kimura and K. Tsuzaki: Materials Science and Engineering A, 2005, Vol. 403, pp. 249–259.10.1016/j.msea.2005.05.057 ↗
44. C.W. Sinclair, J.D. Mithieux, J.H. Schmitt and Y. Bréchet: Metallurgical and Materials Transactions A, 2005, Vol. 36A, pp. 3205-3215.10.1007/s11661-005-0091-6 ↗
45. L. Duprez, B.C. De Cooman, N. Akdut: Zeitschrift für Metallkunde, 2002, Vol. 93 (3), pp. 236-243.10.3139/146.020236 ↗
46. C. Herrera, D. Ponge, D. Raabe: Proc. 3rs Int. Conf. on Thermo-Mechanical Processing of Steels, Padova, Italy. 2008. Vol. 3, pp. 1–10.
47. N. Tsuji, K. Tsuzaki, T. Maki: ISIJ International, 1993, Vol. 33, pp. 783-792.10.2355/isijinternational.33.783 ↗
48. N. Tsuji, K. Tsuzaki, T. Maki: ISIJ international, 1994, Vol. 34, pp. 1008-1017.10.2355/isijinternational.34.1008 ↗
49. A. Paggi, G. Angella, R. Donnini: Materials Characterization, 2015, Vol. 107, pp. 174-181.10.1016/j.matchar.2015.07.003 ↗
50. R. Badji, B. Bacroix and M. Bouabdallah: Materials Characterization, 2011, Vol. 62, pp. 833 – 843.10.1016/j.matchar.2011.06.001 ↗
51. L.S. Tóth, P. Gilormini and J.J. Jonas: Acta Metall., 1988, Vol. 36, pp. 3077–3091.10.1016/0001-6160(88)90045-4 ↗
52. S. Li, I.J. Beyerlein and A.M. Bourke: Mater. Sci. Eng.: A, 2005, Vol. 394, pp. 66–77.10.1016/j.msea.2004.11.032 ↗
53. A. Dehghan-Manshadi, M. R. Barnett and P. D. Hodgson: Metallurgical and Materials Transactions A, 2008, Vol. 39(6), pp. 1359-1370.10.1007/s11661-008-9512-7 ↗
54. R. E. Stoltz and J. B. Vander Sande: Metallurgical and Materials Transactions A, 1980, Vol. 11(6), pp. 1033-1037.10.1007/BF02654717 ↗
55. J. Y. Choi, J. H. Ji, S. W. Hwang and K. Park: Materials Science and Engineering A, 2012, Vol. 534, pp. 673– 680.10.1016/j.msea.2011.12.025 ↗
56. S. Baldo and I. Mészáros: J Mater. Sci., 2010, Vol. 45, pp. 5339–5346.10.1007/s10853-010-4582-5 ↗
57. I.A. Yakubtsov, A. Ariapour and D.D. Perovic: Acta Materialia, 1999, Vol. 47, pp. 1271-1279.10.1016/S1359-6454(98)00419-4 ↗
58. N. Akdut and J. Foct: Scripta Metallurgica et Materialia, 1995, Vol. 32, pp. 103-108.10.1016/S0956-716X(99)80020-X ↗
59. T.H. Lee, C.S Oh and S.J. Kim: Scripta Materialia, 2008, Vol. 58, pp. 110-113.10.1016/j.scriptamat.2007.09.029 ↗
60. M. Stalder, S. Vogel, M.A.M. Bourke, J.G. Maldonado, D.J. Thoma and V.W. Yuan: Materials Science and Engineering A, 2000, Vol. 280, pp. 270-281.10.1016/S0921-5093(99)00706-6 ↗
61. J. A. Jimenez, M. Carsi, O. A. Ruano: Journal of Materials Science, 2000, Vol. 35, pp. 907– 915.10.1023/A:1004750424897 ↗
62. C. Herrera, D. Ponge, D. Raabe: Materials Science Forum, 2012, Vol. 715, pp. 550.10.4028/www.scientific.net/MSF.715-716.550 ↗
63. A. Dehghan-Manshadi, M. R. Barnett and P. D. Hodgson: Metallurgical and Materials Transactions A, 2008, Vol. 39(6), pp. 1359-1370.10.1007/s11661-008-9512-7 ↗
64. R.K. Ray, J.J. Jonas and R.E. Hook: International Materials Reviews, 1994, Vol. 39, No. 4, pp. 129-172.10.1179/imr.1994.39.4.129 ↗
65. T. Waterschoot, L. Kestens and B.C. De Cooman: Metallurgical and Materials Transactions: A, 2002, Vol. 33, pp. 1091-1102.10.1007/s11661-002-0211-5 ↗
66. T. Urabe and J. J. Jonas: ISIJ international, 1994, Vol. 34, No. 5, pp. 435-442.10.2355/isijinternational.34.435 ↗
67. K. Tagashira, W. B. Hutchinson and I. L. Dillamore: Proc. 6th Int. Conf. on ‘Textures of materials’, 1981. Vol. 2, p. 778.
68. W. B. Hutchinson: Met. Sci., 1974, Vol. 8, p. 185.10.1179/msc.1974.8.1.185 ↗