Microstructural Evolution of Cu/Solder/Cu Pillar-Type Structures with Different Diffusion Barriers
Source abstract
Abstract
Microstructural evolution of the Cu/solder/Cu pillar-type bonding structures with a reduced solder volume subjected to thermal aging at 423 K to 473 K(150 °C to 200 °C) was investigated. In a bonding structure employing a Ni single layer as the diffusion barrier, solder was consumed with formation of the Ni3Sn4 phase at the bonding interfaces due to an usual Sn/Ni interfacial reaction. However, an unusual Sn/Cu reaction occurred with formation of the Cu6Sn5 (and Cu3Sn) phase on the periphery of the Cu pillar due to out-diffusion of Sn toward the pillar periphery. Consumption of solder was accelerated by the above two reactions which led to the formation of a continuous gap in the bonding structure. Employment of a thicker Ni layer plus a Cu cap layer as the diffusion barrier in the bonding structure effectively blocked out-diffusion of Sn toward the periphery of the Cu pillar and therefore retarded the gap formation. The retardation effect was attributed to an increment of diffusion distance on the pillar periphery due to an effective diffusion barrier composed by Ni and thicker Cu-Sn (Cu6Sn5 + Cu3Sn) phase layers. Detailed phase identification and microstructural evolution in the bonding structures were also investigated using scanning electron microscopy and transmission electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. I. E. Anderson, J. C. Foley, B. A. Cook, J. Harringa, R. L. Terpstra, and O. Unal, J. Electron. Mater., Vol. 30, pp. 1050–59 (2001).10.1007/s11664-001-0129-5 ↗
2. K. S. Kim, S. H. Huh, and K. Suganuma, Microelectron. Reliab., Vol. 43, pp. 259–67 (2003).10.1016/S0026-2714(02)00239-1 ↗
3. R. Mayappan and Z. A. Ahmad, Intermetallics, Vol. 18, pp. 730–35 (2010).10.1016/j.intermet.2009.11.016 ↗
4. F. Ren, J.-W. Nah, K. N. Tu, B. Xiong, L. Xu and H. L. Pang, Appl. Phys. Lett. 89, 141914 (2006).10.1063/1.2358113 ↗
5. C.-M. Chen, Y.-M. Hung, and C.-H. Lin, J. Alloys Compd., Vol. 475, pp. 238–44 (2009).10.1016/j.jallcom.2008.07.106 ↗
6. K. Zeng and K.N. Tu, Mater. Sci. Eng., Vol. 38, pp. 55–105 (2002).10.1016/S0927-796X(02)00007-4 ↗
7. J. Glazer, J. Electron. Mater., Vol. 23, pp 693–700 (1994).10.1007/BF02651361 ↗
8. S. K. Seo, S. K. Kang, D. Y. Shih, and H. M. Lee, J. Electron. Mater., Vol. 38, pp. 257–65 (2009).10.1007/s11664-008-0545-x ↗
9. D. Kim, D. Suh, T. Millard, H. Kim, C. Kumar, M. Zhu, and Y. Xu, Proceedings of 57th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2007), pp.1614–19.10.1109/ECTC.2007.374010 ↗
10. K.-Z. Wang and C.-M. Chen, J. Electron. Mater., Vol. 34, pp. 1543–49 (2005).10.1007/s11664-005-0163-9 ↗
11. G. Ghosh, Acta Mater., Vol. 48, pp. 3719–38 (2000).10.1016/S1359-6454(00)00165-8 ↗
12. A. Yeoh, M. Chang, C. Pelto, T. L. Huang, S. Balakrishnan, G. Leatherman, S. Agraharam, G. Wang, Z. Wang, D. Chiang, P. Stover, and P. Brandenburger, IEEE Proceedings of Electronic Components and Technology Conference, 2006, pp. 1611–15.
13. J. Yu, A. Anand, Y. C. Mui, P. Srinivasan, and R. Master, IEEE Proceedings of Electronics Packaging Technology Conference, 2007, pp. 618–22.10.1109/EPTC.2007.4469726 ↗
14. C.-C. Li, C.-K. Chung, W.-L. Shih, and C.-R. Kao, Metall. Mater. Trans. A, Vol. 45A, pp. 2343–46 (2014).10.1007/s11661-014-2263-8 ↗
15. B. Lee, H. Jeon, K.-W. Kwon, and H.-J. Lee, Acta Mater., Vol. 61, pp. 6736–42 (2013).10.1016/j.actamat.2013.07.043 ↗
16. J.-C. Lin and C.-H. Yu, US patent (US 8,592,995 B2), Nov. 2013.
17. P. Nash and A. Nash, ASM Handbook, Vol. 3 Alloy Phase Diagrams. Materials Park, ASM International, 1992. p. 2.318.
18. C.-M. Chen and S.-W. Chen, Acta Mater., Vol. 50, pp. 2461–69 (2002).10.1016/S1359-6454(02)00076-9 ↗
19. K.-L. Lin and J.-M. Jang, Mater. Chem. Phys., Vol. 38, pp. 33–41 (1994).10.1016/0254-0584(94)90142-2 ↗
20. S. Bader, W. Gust, and H. Hieber, Acta Metall. Mater. 43, pp. 329–37 (1995).
21. J. F. Shackelford and W. Alexander, Materials Science and Engineering Handbook, 3rd Ed., CRC Press LLC, Boca Raton, 2001.
22. H. P. R. Frederikse, R. J. Fields, and A. Feldman, J. Appl. Phys., Vol. 72, pp. 2879–82 (1992).10.1063/1.351487 ↗
23. C.-E. Ho, S.-C. Yang, and C.-R. Kao, J. Mater. Sci., Vol. 18, pp. 155-74 (2007).
24. C.-P. Lin and C.-M. Chen, J. Electron. Mater., Vol. 38, pp. 908–14 (2009).10.1007/s11664-009-0778-3 ↗
25. S. Kumar, C. A. Handwerker, and M. A. Dayananda, J. Phase Equilib. Diff., Vol. 32, pp. 309–19 (2011).10.1007/s11669-011-9907-9 ↗
26. S.-W. Chen, S.-H. Wu, and S.-W. Lee, J. Electron. Mater., Vol. 32, pp. 1188–94 (2003).10.1007/s11664-003-0010-9 ↗