journal article·2002-08

Computer simulation of solidification processes—The evolution of a technology

Robert D. Pehlke

Publisher page

Abstract

The historical development of solidification modeling is traced, as applied to solidification processing. Clearly, the growth of this technology followed the computer explosion, particularly with regard to hardware. However, universities and government laboratories made substantial contributions in the software area, particularly in removing roadblocks to the further development of the technology and by creative examples. The commercial software houses have utilized these leading-edge developments, a practice continued and expanding today. Heat-transfer analyses by computer were initiated by utilizing the analog computer, which appeared to be a competing technology, but by the early 1960s, the digital computer had become the winner in larger-scale computation. A number of benchmark achievements followed over the next several decades. The evolution of this technology is documented, including predictions of solidification microstructure and resulting material properties. Future developments are projected.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. David P. Kanicki: Modern Casting, 2000, Dec., pp. 24–28.
2. D.L. Katz and E.I. Organick: J. Eng. Education, 1960, vol. 51 (3), pp. 183–205.
3. D.L. Katz et al.: “Electronic Computers in Engineering Education,” First Annual Report, College of Engineering, University of Michigan, Ann Arbor, MI, Aug. 26, 1960.
4. Transactions of American Foundrymen’s Society, 1941–1961, Publications of V. Paschkis (for a complete list of the papers of Paschkis and co-workers, see pp. 10–11 of Ref. 11).
5. G.M. Dusinberre: Heat-Transfer Calculations by Finite Differences, International Textbook Company, Scranton, PA, 1961.
6. T.X. Hou, J.O. Wilkes, and R.D. Pehlke: Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes V, Davos, Switzerland, M. Rappaz, M.R. Ozgu, and K.W. Mahin, eds., TMS-AIME, Warrendale, PA, 1990, pp. 15–22.
7. T.X. Hou, J.O. Wilkes, and R.D. Pehlke: Trans. Am. Foundrymen’s Soc., 1991, vol. 99, pp. 325–32.
8. Computer Applications in Metallurgical Engineering, 1963 Metal Congress, Cleveland, OH, 1963, ASM Seminar Volume, Robert D. Pehlke and Maurice J. Sinnott, eds., ASM, Metals Park, OH, 1964.
9. K. Forsund, Giesserei, 1962, vol. 14, p. 51.
10. J.G. Henzel and J. Keverian: AFS Cast Met. Res. J., 1965, vol. 1 (1), pp. 19–36.
11. R.D. Pehlke, R.E. Marrone, and J.O. Wilkes: Computer Simulation of Solidification, American Foundrymen’s Society, Des Plaines, IL, 1976.
12. F.A. Brandt, H.F. Bishop, and W.S. Pellini: Trans. Am. Foundrymen’s Soc., 1953, vol. 62, pp. 451–56.
13. H.F. Bishop, F.A. Brandt, and W.S. Pellini: Trans. Am. Foundrymen’s Soc., 1951, vol. 59, pp. 435–50.
14. H.F. Bishop and W.S. Pellini: The Foundry, 1952, Feb.
15. P.K. Trojan, M.J. Weins, and R.A. Flinn: Trans. Am. Foundrymen’s Soc., 1963, vol. 71, p. 656.
16. R.D. Pehlke, M.J. Kirt, R.E. Marrone, and D.J. Cook: AFS Cast Met. Res. J., 1973, vol. 9 (2), pp. 49–55.
17. A. Jeyarajan and R.D. Pehlke: Trans. Am. Foundrymen’s Soc., 1975, vol. 83, pp. 405–12.
18. A. Jeyarajan and R.D. Pehlke: Trans. Am. Foundrymen’s Soc., 1978, vol. 86, pp. 457–64.
19. R.D. Pehlke, J.T. Berry, W.C. Erickson, and C.H. Jacobs: Proc. Int. Conf. on Solidification, The Metals Society, University of Sheffield, Sheffield, United Kingdom, July 18–21, 1977, pp. 371–79.
20. J.T. Berry and R.D. Pehlke: USA Official Exchange Paper, 50th Int. Foundry Congr., Cairo, Nov. 1983. Proceedings, No. 5; AFS Trans., 1984, vol. 92, pp. 101–108.
21. Process Modeling—Fundamentals and Applications to Metals, Proc. American Society for Metals Process Modeling Sessions, Materials and Processing Congresses, 1978–1979, Materials/Metalworking Technology Series, American Society for Metals, Metals Park, OH.
22. W.C. Erickson and A.V. Houghton: Trans. Am. Foundrymen’s Soc., 1977, vol. 85, p. 59.
23. P.V. Desai et al.: “A Computer-Aided Design System for Castings,” Progress Report No. 2, Grant No. DAR78-214301, Dec. 1981.
24. P.V. Desai et al.: “A Computer-Aided Design System for Castings,” Progress Report No. 3, Grant No. DAR78-214301, Dec. 1982.
25. R.D. Pehlke, P.K. Trojan, R.A. Flinn, B.P. Winter, and M.C. Sutton: Paper presented at 49th Int. Foundry Congr., Chicago, IL, Apr. 1982.
26. R.D. Pehlke, B.P. Winter, and P.K. Trojan: Trans. Am. Foundrymen’s Soc., 1983, vol. 91, pp. 81–88.
27. R.D. Pehlke, B.P. Winter, T.R. Ostrom, K.J. Hartman, and P.K. Trojan: Trans. Foundrymen’s Soc., 1984, vol. 92, pp. 551–60.
28. R.D. Pehlke: USA Official Exchange Paper for 60th Int. Foundry Congress, The Hague, Netherlands, 1993; Foundry Management Technol., 1994, June, pp. 26–28; and 1994, July, p. 18.
29. R.D. Pehlke, A. Jeyarajan, and H. Wada: Summary of Thermal Properties for Casting Alloys and Mold Materials, University of Michigan, Ann Arbor, MI, 1982; NTIS, 5285 Port Royal Road, Springfield, VA 22161.
30. Proc. Engineering Foundation Conf. on Modeling of Castings and Welding Processes, Rindge, NH, Aug. 1980, Harold D. Brody and Diran Apelian, eds., TMS-AIME, Warrendale, PA, 1980.
31. Proc. Engineering Foundation Conf. on Modeling of Castings and Welding Processes, Henniker, NH, July 31–Aug. 5, 1983, J.A. Dantzig and J.T. Berry, eds., TMS-AIME, Warrendale, PA, 1984.
32. Proc. Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IX, Aachen, Germany, Aug. 2001, P. Sahm, P. Hansen, and J. Conley, eds., Springer-Verlag, New York, 2001.
33. D.J.P. Adenis, Keith Coates, and David V. Ragone: J. Inst. Met., 1963, vol. 91, pp. 395–403.
34. R.D. Pehlke: Met. Eng. Q., 1964, vol. 4 (2), pp. 266–80.
35. R.D. Pehlke: “Computer Simulation of Heat Transfer During Continuous Casting—A Summary of the Development and Application of a Computer Model for Heat Transfer During Continuous Casting of Steel Using Finite Differences Approximations,” Prepared for McLouth Steel Corporation, Trenton, MI, June 15, 1967.
36. R.D. Pehlke: “Heat Transfer During Continuous Casting—Calculation of Slab Surface Temperatures and Heat Transfer Rates in the Spray Zone of a Continuous Casting Machine,” Prepared for McLouth Steel Corporation, Trenton, MI, Sept. 26, 1967.
37. R.D. Pehlke: “Heat Transfer During Continuous Casting—A Study of Mold Heat Transfer and the Effect of Water Cooling Passage Configurations,” Prepared for McLouth Steel Corporation, Trenton, MI, Mar. 1968.
38. R.D. Pehlke: “Computer Simulation of Heat Transfer During Continuous Casting—A Modification of the Spray Zone Heat Transfer Calculation and Evaluation of Heat Transfer During a Stopped Cast,” Prepared for McLouth Steel Corporation, Trenton, MI, Aug. 19, 1968.
39. D.R. Glass, P.O. Hays, and R.D. Pehlke: “Experimental Study of Heat Transfer During Water Spraying of Hot Steel Surfaces,” Prepared for McLouth Steel Corporation, Trenton, MI, June 1968.
40. E.A. Mizikar: Trans. TMS-AIME, 1967, vol. 239, pp. 1747–53.
41. J.K. Brimacombe and F. Weinberg: J. Iron Steel Inst., 1973, vol. 211, pp. 24–33.
42. J.E. Lait, J.K. Brimacombe, and F. Weinberg: Ironmaking and Steelmaking, 1974, vol. 1, pp. 35–42.
43. R.D. Pehlke: Continuous Casting of Steel, Section I, Introduction to Continuous Casting, Engineering Summer Conf., Center for Professional Development, College of Engineering, University of Michigan, Ann Arbor, MI, 1996.
44. L.J. Heaslip, A. McLean, and I.D. Sommerville: Continuous Casting Volume One, ISS-AIME, Warrendale, PA, 1983.
45. N.A. McPherson and A. McLean: Continuous Casting Volume Six, ISS-AIME, Warrendale, PA, 1992.
46. L.J. Heaslip and A. McLean: ISS-AIME 39th Electric Furnace Conf., ISS-AIME, Warrendale, PA, 1981, pp. 108–20.
47. L.J. Heaslip and J.D. Dorricott: Continuous Casting of Steel, Engineering Summer Conf., The University of Michigan, Ann Arbor, MI, private communication, 1993.
48. J. Szekely and O.J.L. Legbusi: The Physical and Mathematical Modeling of Tundish Operation, Springer-Verlag, New York, NY, 1989, pp. 13–107.10.1007/978-1-4613-9626-0_2 ↗
49. Huiqing Chen: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 1994.
50. H. Chen and R.D. Pehlke: ISS-AIME Steelmaking Conf. Proc., ISS-AIME, Warrendale, PA, 1994, pp. 695–702.
51. H. Chen and R.D. Pehlke: 13th Process Technology Conf., Theme: Continuous Casting, Nashville, TN, Apr. 1995, ISS-AIME, Warrendale, PA.
52. H. Chen and R.D. Pehlke: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 745–56.10.1007/BF02915603 ↗
53. R.A. Stoehr: in Modeling of Casting and Welding Processes, H.D. Brody and D. Apelian, eds., TMS-AIME, Warrendale, PA, 1981, pp. 3–18.
54. T.C. Midea and David Schmidt: Modern Casting, 1999, vol. 89, pp. 47–51.
55. P. Krishna, K.T. Bilkey, and R.D. Pehlke: Proc. Int. Symp. on Light Metals, 40th Annual Conf. of Metallurgists of CIM, Toronto, Aug. 2001, Mahi Sahoo and Trevor Lewis, eds., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada, pp. 417–30.
56. P. Krishna, K.T. Bilkey and R.D. Pehlke: Proc. Int. Symp. on Light Metals. 40th Annual Conf. of Metallurgists of CIM, Toronto, Aug. 2001, eds., Mahi Sahoo and Trevor Lewis, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada, pp. 377–90.
57. J.H. Weiner and B.A. Boley: J. Mech. Phys. Solids, 1963, vol. 11, pp. 145–54.10.1016/0022-5096(63)90049-8 ↗
58. R.W. Lewis and P.M. Roberts: Appl. Scientific Res., 1987, vol. 44, pp. 61–92.10.1007/BF00412007 ↗
59. J.O. Krisstiansson: J. Thermal Stresses, 1982, vol. 5 (3–4) 1982, pp. 315–30.10.1080/01495738208942153 ↗
60. I. Cormeau: Int. J. Num. Methods Eng., 1975, vol. 9, pp. 109–27.10.1002/nme.1620090110 ↗
61. M.D. Snyder and K.J. Bathe: Nucl. Eng Design, 1981, vol. 64, pp. 49–80.10.1016/0029-5493(81)90032-7 ↗
62. A.L. Purvis, E. Kannatey-Asibu, and R.D. Pehlke: Engineering Foundation Conf. on Modeling of Casting and Welding and Advanced Solidification Processes VI, Palm Coast, FL, 1993, T.S. Piwonka, V. Voller, and L. Katgerman, eds., TMS-AIME, Warrendale, PA, 601–08.
63. R.A. Rosenberg, M.C. Flemings, and H.F. Taylor: AFS Trans., 1960, vol. 68, pp. 518–24.
64. Magma Times, Magma GmbH, Aachen, Germany, 2001, vol. 6 (21).
65. J.A. Dantzig: J. Met., 2000, Dec. pp. 18–21.10.1007/s11837-000-0061-9 ↗
66. D.A. Tortorelli, M.M. Tiller, and J.A. Dantzig: Computer Methods Appl. Mech. Eng., 1994, vol. 113 (1–2), pp. 141–55.10.1016/0045-7825(94)90215-1 ↗
67. D.A. Tortorelli et al.: Computer Methods Appl. Mech. Eng., 1994, vol. 113 (1–2), pp. 157–72.10.1016/0045-7825(94)90216-X ↗
68. T.E. Morthland et al.: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 871–85.10.1007/BF02651733 ↗
69. M.M. Tiller and J.A. Dantzig: Appl. Math. Modeling, 1996, vol. 20 (11), pp. 792–99.10.1016/S0307-904X(96)00084-4 ↗
70. R.M. McDavid and J.A. Dantzig: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 679–90.10.1007/s11663-998-0103-1 ↗
71. Neil E. Paton and Boyd A. Mueller: INCAST, 2000, vol. XIII (6), pp. 11–15.
72. W. Oldfield: Trans. ASM, 1996, vol. 59, pp. 945–60.
73. M. Rappaz: Int. Mater. Rev., 1989, vol. 34, pp. 93–123.10.1179/imr.1989.34.1.93 ↗
74. J.A. Warren and W.J. Boettinger: Acta Metall. Mater., 1995, vol. A43, pp. 689–703.10.1016/0956-7151(94)00285-P ↗
75. W.J. Boettinger and J.A. Warren: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 657–69.10.1007/BF02648953 ↗
76. J.A. Warren et al.: Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IX, Aachen, Germany, Peter R. Sahm, Preben N. Hansen, and James G. Conley, eds., Shaker-Verlag, Aachen, Germany, 2000, pp. CII-CIX.
77. A. Karma and W.J. Rappel: Phys. Rev. E, 1998, vol. 57, pp. 4323–49.10.1103/PhysRevE.57.4323 ↗
78. M. Plapp and A. Karma: Phys. Rev. Lett., 2000, vol. 84, pp. 1740–43.10.1103/PhysRevLett.84.1740 ↗
79. N. Provatas, N. Goldenfeld, and J. Dantzig: Solidification 1999, Symp. Proc. TMS Fall Meeting 1999, TMS, Warrendale, PA, pp. 151–60.
80. C. Beckermann, G. Fisher, D. Jensen, and S. Venkatasubramanian: “Final Report: Metalcasting Lead Time and Cost Reduction Project—1.1.1.2 Identify and Apply Software Tools,” American Metal Casting Consortium—1995, Steel Founders’ Society of America, Des Plaines, IL, Special Report No. 27, July 1996.
81. M. Blair and R. Monroe: Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IX, Aachen, Peter R. Sahm, Preben N. Hansen, and James G. Conley, Shaker-Verlag, 2000, pp. XIX–XXIV.
82. M. Cross, K. McManus, C. Bailey, K. Pericleous, T.N. Croft, and A. Williams: Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IX, Aachen, Peter R. Sahm, Preben N. Hansen, and James G. Conley, eds., Shaker-Verlag, 2000, pp. XXV–XXXV.
83. P.R. Sahm and P.N. Hansen: Engineering Foundation Conf. on Modeling of Casting, Welding and Advanced Solidification Processes IX, Aachen, Peter R. Sahm, Preben N. Hansen, and James G. Conley, eds., Shaker-Verlag, 2000, pp. LXXXI–XCII.
84. E. Wyatt: AGARD Meeting on Virtual Manufacturing, Aalborg, Denmark, Oct. 1997, AGARD Report No. 821, 1998.
85. Michael Evans: Gibbs Die Casting Corporation, Henderson, KY, personal communication, Aug. 2001.
86. T.B. Harabuchi and R.D. Pehlke: Continuous Casting, vol. 4, Design and Operations, ISS-AIME, Warrendale, PA, 1988.