Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen
Source abstract
Abstract
Two sets of “theta”-shaped specimens were additively manufactured with Inconel 718 powders using an electron beam melting technique with two distinct scan strategies. Light optical microscopy, mechanical testing coupled with a digital image correlation (DIC) technique, finite element modeling, and neutron diffraction with in situ loading characterizations were conducted. The cross-members of the specimens were the focus. Light optical micrographs revealed that different microstructures were formed with different scan strategies. Ex situ mechanical testing revealed each build to be stable under load until ductility was observed on the cross-members before failure. The elastic moduli were determined by forming a correlation between the elastic tensile stresses determined from FEM, and the elastic strains obtained from DIC. The lattice strains were mapped with neutron diffraction during in situ elastic loading; and a good correlation between the average axial lattice strains on the cross-member and those determined from the DIC analysis was found. The spatially resolved stresses in the elastic deformation regime are derived from the lattice strains and increased with applied load, showing a consistent distribution along the cross-member.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C.A. Brice, W.H. Hofmeister, Metall Mater Trans A, 44A (2013) 5147-5153.10.1007/s11661-013-1847-z ↗
2. R.R. Dehoff, S.S. Babu, Acta Mater, 58 (2010) 4305-4315.10.1016/j.actamat.2010.03.006 ↗
3. W.J. Sames, K.A. Unocic, R.R. Dehoff, T. Lolla, S.S. Babu, J Mater Res, 29 (2014) 1920-1930.10.1557/jmr.2014.140 ↗
4. W.E. Frazier, J Mater Eng Perform, 23 (2014) 1917-1928.10.1007/s11665-014-0958-z ↗
5. C.K. Chuma, K.F. Leong, C.S. Lim, Rapid Prototyping: Principles and Applications, 2nd ed., World Scientific, Singapore, 2003.
6. S.S. Al-Bermani, M.L. Blackmore, W. Zhang, I. Todd, Metall Mater Trans A, 41A (2010) 3422-3434.10.1007/s11661-010-0397-x ↗
7. S.M. Gaytan, L.E. Murr, F. Medina, E. Martinez, M.I. Lopez, R.B. Wicker, Mater Technol, 24 (2009) 180-190.10.1179/106678509X12475882446133 ↗
8. L.E. Murr, E.V. Esquivel, S.A. Quinones, S.M. Gaytan, M.I. Lopez, E.Y. Martinez, F. Medina, D.H. Hernandez, E. Martinez, J.L. Martinez, S.W. Stafford, D.K. Brown, T. Hoppe, W. Meyers, U. Lindhe, R.B. Wicker, Materials Charact, 60 (2009) 96-105.10.1016/j.matchar.2008.07.006 ↗
9. R. Dehoff, C. Duty, W. Peter, Y. Yamamoto, W. Chen, C. Blue, C. Tallman, Adv Mater Process, 171 (2013) 19-22.
10. Y.C. Zhang, Z.G. Li, P.L. Nie, Y.X. Wu, Metall Mater Trans A, 44A (2013) 708-716.10.1007/s11661-012-1459-z ↗
11. A. Strondl, S. Milenkovic, A. Schneider, U. Klement, G. Frommeyer, Adv Eng Mater, 14 (2012) 427-438.10.1002/adem.201100349 ↗
12. T. Vilaro, C. Colin, J.D. Bartout, L. Naze, M. Sennour, Mater Sci Eng A-Struct, 534 (2012) 446-451.10.1016/j.msea.2011.11.092 ↗
13. H. Qi, M. Azer, A. Ritter, Metall Mater Trans A, 40A (2009) 2410-2422.10.1007/s11661-009-9949-3 ↗
14. A. Strondl, R. Fischer, G. Frommeyer, A. Schneider, Mater Sci Eng A-Struct, 480 (2008) 138-147.10.1016/j.msea.2007.07.012 ↗
15. P.L. Blackwell, J Mater Process Technol, 170 (2005) 240-246.10.1016/j.jmatprotec.2005.05.005 ↗
16. A. Strondl, M. Palm, J. Gnauk, G. Frommeyer, Mater Sci Tech, 27 (2011) 876-83.10.1179/026708309X12468927349451 ↗
17. Y. Tian, D. McAllister, H. Colijn, M. Mills, D. Farson, M. Nordin, S. Babu, Metall Mater Trans A, 45A (2014) 4470-4482.10.1007/s11661-014-2370-6 ↗
18. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, F. Medina, Acta Mater, 60 (2012) 2229-2239.10.1016/j.actamat.2011.12.032 ↗
19. K.N. Amato, J. Hernandez, L.E. Murr, E. Martinez, S.M. Gaytan, P.W. Shindo, S. Collins, J Mater Sci Res, 1 (2012) 3-41.
20. C. Radhakrishna, K.P. Rao, J Mater Sci, 32 (1997) 1977-1984.10.1023/A:1018541915113 ↗
21. A. Devaux, L. Naze, R. Molins, A. Pineau, A. Organista, J.Y. Guedou, J.F. Uginet, P. Heritier, Mater Sci Eng A-Struct, 486 (2008) 117-122.10.1016/j.msea.2007.08.046 ↗
22. L.E. Murr, E. Martinez, S.M. Gaytan, D.A. Ramirez, B.I. Machado, P.W. Shindo, J.L. Martinez, F. Medina, J. Wooten, D. Ciscel, U. Ackelid, R.B. Wicker, Metall Mater Trans A, 42A (2011) 3491-3508.10.1007/s11661-011-0748-2 ↗
23. L. Sochalski-Kolbus, E. Payzant, P. Cornwell, T. Watkins, S. Babu, R. Dehoff, M. Lorenz, O. Ovchinnikova, C. Duty: Metall. Mater. Trans. A, vol. 46A, (2015) pp. 1419–32.10.1007/s11661-014-2722-2 ↗
24. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, R.B. Wicker, J Mater Sci Technol, 28 (2012) 1-14.10.1016/S1005-0302(12)60016-4 ↗
25. D. Cormier, A. Harrysson, H. West, Rapid Prototyping J, 10 (2004) 35-41.10.1108/13552540410512516 ↗
26. P. Rangaswamy, M.L. Griffith, M.B. Prime, T.M. Holden, R.B. Rogge, J.M. Edwards, R.J. Sebring, Mater Sci Eng A-Struct, 399 (2005) 72-83.10.1016/j.msea.2005.02.019 ↗
27. A.J. Durelli, S. Morse, V. Parks, Materials Res Standard, 2 (1962) 114-117.
28. G.D. Quinn: in Fractography of Advanced Ceramics III, J. Dusza, R. Danzer, R. Morrell, G.D. Quinn, eds., 2009, pp. 201–208.
29. R. Dehoff, M. Kirka, W. Sames, H. Bilheux, A. Tremsin, L. Lowe, S. Babu, Mater Sci Tech, 31 (2015) 931-938.10.1179/1743284714Y.0000000734 ↗
30. M. Larsson: US Patent #US 7713454 B2, 11 May 2010.
31. ABAQUS (2011) “ABAQUS Documentation”, Dassault Systèmes, Providence, RI, USA.
32. H. Si: ACM Trans. Math. Softw., 2015, vol. 41(2), art. no. 11.10.1145/2629697 ↗
33. Technical Bulletin: “Inconel Alloy 718”, Special Metals Corporation, 2007.
34. B. Baufeld, J Mater Eng Perform, 21 (2012) 1416-1421.10.1007/s11665-011-0009-y ↗
35. R.K. Bird and J. Hibberd: NASA Technical Memorandum Paper No. TM-2009-215929, 2009.
36. J. Repper, P. Link, M. Hofmann, C. Krempaszky, W. Petry, E. Werner, Appl Phys A-Mater, 99 (2010) 565-569.10.1007/s00339-010-5607-2 ↗
37. K. An, W.B. Bailey, S.O. Craig, H. Choo, C.R. Hubbard, D.L. Erdman III, J J Neutron Res, 15 (2007) 207-213.10.1080/10238160802399779 ↗
38. M.T. Hutchings, P.J. Withers, T.M. Holden, T. Lorentzen, Introduction to the characterization of residual stress by neutron diffraction, Taylor and Francis, Boca Raton, FL, 2005.10.1201/9780203402818 ↗