journal article·2015-12

Tensile and Dry Sliding Wear Behavior of In-Situ Al3Zr + Al2O3-Reinforced Aluminum Metal Matrix Composites

G. Gautam, A. K. Ghose, I. Chakrabarty

Publisher page

Abstract

In the present study, aluminum-based in-situ intermetallic Al3Zr and Al2O3-reinforced metal matrix composites have been synthesized by direct melt reaction through stir casting of zirconium oxychloride (ZrOCl2·8H2O) powder in commercially pure aluminum. The in-situ reaction produces intermetallic Al3Zr needles that change to feathery morphology with increasing ZrOCl2·8H2O, while the Al2O3 is of fine globular shape. The tensile strengths of these composites increase with increasing volume percent reinforcements, attaining a peak value with 18 pct addition. The dry sliding wear behavior of the composites was evaluated with varying parameters, viz. sliding distance, normal load, and sliding velocities. The wear mechanisms are explained based on the microstructure, the topography of the worn surface, and the interfacial strength of the matrix and reinforcement. The tensile and wear properties are compared with widely used wear resistant hypereutectic Al-17 pct Si cast alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Ye Haizhi, J. Mat. Eng. Performance, 12(3) (2003) 288-297.10.1361/105994903770343132 ↗
2. M. Javidani, D. Larouche, Int. Mat. Rev., 59(3) (2014) 132-157.10.1179/1743280413Y.0000000027 ↗
3. D. J. Lloyd, Int.Mater. Rev. 39 (1999) 1–23.10.1179/imr.1994.39.1.1 ↗
4. M.K. Surappa, P.K. Rohatgi., J. Mater. Sci. 16 (1981) 983-993.10.1007/BF00542743 ↗
5. K.K. Chawla (1998) Composite Materials, Science and Engineering. Springer: New York, 164-211.10.1007/978-1-4757-2966-5_6 ↗
6. S.C. Tjong, Z.Y. Ma, Mater. Sci. Eng. R29 (2000) 49-113.10.1016/S0927-796X(00)00024-3 ↗
7. R.A. Varine, Metall. Mater. Trans. 33A (2002) 193–201.10.1007/s11661-002-0018-4 ↗
8. D.R. Johnson, Current opinion in Solid State and Mater. Sci. 4 (1999) 249-253.10.1016/S1359-0286(99)00020-0 ↗
9. Y.T. Zhao., S.L. Zheng, G. Chen, X.N. Cheng, C.Q Wang (2008) Comp. Sci. Technol. 68:1463-1470.10.1016/j.compscitech.2007.10.036 ↗
10. Songali Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng, J. Alloys Comp. 475,1-2 (2009) 261-267.10.1016/j.jallcom.2008.07.100 ↗
11. Song-li Zhang, Yu-Tao Zhao, Gang Chen, Xiao-Nong Cheng, Qi-Xun Dai, J. Alloys Comp. 429 (2007) 198-203.10.1016/j.jallcom.2006.04.038 ↗
12. G.R. Li, Y.T. Zhao, H.M. Wang, G. Chen, Q.X. Dai, X.N. Cheng, J. Alloys Comp. 471 1-2 (2009) 530-535.10.1016/j.jallcom.2008.04.037 ↗
13. Yutao Zhao, Songli Zhang, Gang Chen, Xiaonong Cheng, Mater. Sci. Eng. A 457 (2007) 156-161.10.1016/j.msea.2006.12.007 ↗
14. T.Z. Yu, S.-L. Zhang, G. Chen (2010) Trans. Nonferrous Met. Soc. China 20:2129-2133.10.1016/S1003-6326(09)60429-5 ↗
15. Y.T. Zhao, G.X. Sun, J. Mater. Sci. Lett. 20 (2001) 1859-1861.10.1023/A:1012889221153 ↗
16. Y.T. Zhao, X.N. Cheng, Q.X. Dai, L. Cai, G.X. Sun, Mater. Sci. Eng. A 360 (2003) 315-318.10.1016/S0921-5093(03)00474-X ↗
17. Y.-T. Zhao, L.I. Zhang-Hua, X.-N. Cheng, Q.-X. Dai, L. Cai (2003) Trans. Nonferrous Met. Soc. China 13(4):769-773
18. Songli Zhang, Yutao Zhao, Gang Chen, Xiaonong Cheng, J.Alloys Comp. 478 (2009) 210-214.10.1016/j.jallcom.2008.11.107 ↗
19. R.L Deuis, C. Subramanian, J.M. Yellup (1997) Comp. Sci. Technol. 57: 415-435.10.1016/S0266-3538(96)00167-4 ↗
20. A. Mondal, M. Chakraborty, B.S. Murty, Wear 262 (2007) 160-166.10.1016/j.wear.2006.04.003 ↗
21. B. Venkataraman, G. Sundararajan, Acta Mater. 44(1996) 461-473.10.1016/1359-6454(95)00218-9 ↗
22. A.P. Sanniano, H.J. Rack, Wear 189 (1995) 1–1910.1016/0043-1648(95)06657-8 ↗