Effect of Low Temperature on Fatigue Crack Formation and Microstructure-Scale Growth from Corrosion Damage in Al-Zn-Mg-Cu
Source abstract
Abstract
The strong effect of cold temperature on the fatigue resistance of 7075-T651 is established. As temperature decreases from 296 K to 183 K (23 °C to −90 °C), the formation life for cracking about pit and EXCO corrosion perimeters increases, microstructure scale crack growth rates decrease in the range from 20 to 500 μm beyond the corrosion topography, and long crack growth rates similarly decline. Fatigue crack surface features correlate with reduced hydrogen embrittlement with decreasing temperature fed by localized H produced during precorrosion for pit and EXCO-proximate cracks, as well as by crack tip H produced by water vapor reaction during stressing for all crack sizes. The importance of the former H source increases with decreasing temperature for cracks sized below 200 μm. Decreasing temperature to 223 K (−50 °C) eliminates the contribution of environmental H through interaction of reduced water vapor pressure in equilibrium with ice and reduced H diffusion. The Knudsen flow model and exposure parameter, \( P_{{{\text{H}}2 {\text{O}}}}/f \), enables improved modeling of temperature dependent crack propagation, but does not fully describe low temperature fatigue behavior due to possible rate limitation by H diffusion. Further decreases in MSC da/dN to 183 K (−90 °C) are related to reduced mobility of the corrosion-precharged H which may associate with vacancies from dissolution. Crack formation, and growth rates correlate with either elastic stress intensity range or cyclic crack tip opening displacement, and are available to predict corrosion effects on airframe fatigue for the important low temperature regime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. J. Papazian, E.L. Anagnostou, R.J. Christ, S.J. Engel, D. Fridline, D. Hoitsma, J. Madsen, J. Nardiello, J. Payne, R.P. Silberstein, G. Welsh, J.B. Whiteside: HR0011-04-C-0003, DARPA, Arlington, VA, 2009.
2. L. Molent: Int. J. Fatig., 2010, vol. 32, pp. 639–49.10.1016/j.ijfatigue.2009.09.002 ↗
3. G.A. Shoales, S.A. Fawaz, and M.R. Walters: ICAF 2009 - Bridging the Gap Between Theory and Operational Practice, M. Bos, ed., Springer, Rotterdam, The Netherlands, 2009, pp. 187–207.10.1007/978-90-481-2746-7_11 ↗
4. G.A. Shoales, S.R. Shah, J.W. Rausch, M.R. Walters, S.R. Arunachalam, and M.J. Hammond: USAFA-TR-2006-11, USAF, Robins AFB, GA, 2006.
5. G.H Koch, E.L. Hagerdorn, and A.P. Berens: AFRL-VA-WP-TR-2004-3057, AFRL, Wright-Patterson AFB, OH, 1995.
6. G.K. Cole, G. Clark, and P.K. Sharp: DSTO-RR-0201, DSTO, Melbourne, Australia, 1997.
7. M.E. Hoffman and P.C. Hoffman: Int. J. Fatig., 2001, vol. 23, pp. S1–10.10.1016/S0142-1123(01)00115-3 ↗
8. H. Weiland, J. Nardiello, S. Zaefferer, S. Cheong, J. Papazian, and D. Raabe: Eng. Fract. Mech., 2009, vol. 76, pp. 709–14.10.1016/j.engfracmech.2008.11.012 ↗
9. J.E. Bozek, J.D. Hochhalter, M.G. Veilleux, M. Liu, G. Heber, S.D. Sintay, A.D. Rollett, D.J. Littlewood, A.M. Maniatty, H. Weiland, R.J. Christ, J. Payne, G. Welsh, D.G. Harlow, P.A. Wawrzynek, and A.R. Ingraffea: Model. Simul. Mater. Sci., 2008, vol. 16, pp. 1–28.10.1088/0965-0393/16/6/065007 ↗
10. J.M. Emery, J.D. Hochhalter, P.A. Wawrzynek, G. Heber, and A.R. Ingraffea: Eng. Fract. Mech., 2009, vol. 76, pp. 1500–30.10.1016/j.engfracmech.2009.02.018 ↗
11. S. Kim, J.T. Burns, and R.P. Gangloff: Eng. Fract. Mech., 2009, vol. 76, pp. 651–67.10.1016/j.engfracmech.2008.11.005 ↗
12. J.T. Burns, S. Kim, and R.P. Gangloff: Corros. Sci., 2010, vol. 52, pp. 498–508.10.1016/j.corsci.2009.10.006 ↗
13. B.R. Crawford, C. Loader, A.R. Ward, C. Urbani, M.R. Bache, S.H. Spence, D.G. Hay, W.J. Evans, G. Clark, and A.J. Stonham: Fatig. Fract. Eng. M, 2005, vol. 28, pp. 795–808.10.1111/j.1460-2695.2005.00912.x ↗
14. E.A. DeBartolo and B.M. Hillberry: Int. J. Fatig., 2001, vol. 23, pp. S79–S86.10.1016/S0142-1123(01)00122-0 ↗
15. D.L. DuQuesnay, P.R. Underhill, and H.J. Britt: Int. J. Fatig., 2003, vol. 25, pp. 371–77.10.1016/S0142-1123(02)00168-8 ↗
16. K.M. Gruenberg, B.A. Craig, B.M. Hillberry, R.J. Bucci, and A.J. Hinkle: Int. J. Fatig., 2004, vol. 26, pp. 615–27.
17. M. Liao, G. Renaud, and N.C. Bellinger: Int. J. Fatig., 2007, vol. 29, pp. 677–86.10.1016/j.ijfatigue.2006.07.003 ↗
18. J.J. Medved, M. Breton, and P.E. Irving: Int. J. Fatig., 2004, vol. 26, pp. 71–80.10.1016/S0142-1123(03)00069-0 ↗
19. K.K. Sankaran, R. Perez, and K.V. Jata: Mater. Sci. Eng. A, 2001, vol. 297, pp. 223–29.10.1016/S0921-5093(00)01216-8 ↗
20. K. Sharp, T. Mills, S. Russo, G. Clark, Q. Liu, in: FAA/DoD/NASA Aging Aircraft 2000, St. Louis, MO, 2001.
21. K. van der Walde, J.R. Brockenbrough, B.A. Craig, and B.M. Hillberry: Int. J. Fatig., 2005, vol. 27, pp. 1509–18.10.1016/j.ijfatigue.2005.06.026 ↗
22. K. van der Walde and B.M. Hillberry: Int. J. Fatig., 2007, vol. 29, pp. 1269–81.10.1016/j.ijfatigue.2006.10.010 ↗
23. J.T. Burns, J.M. Larsen, and R.P. Gangloff: Int. J. Fatig., 2011, vol. 42, pp. 104–21.10.1016/j.ijfatigue.2011.08.001 ↗
24. J.T. Burns and R.P. Gangloff: Proc. Eng., 2011, vol. 10, pp. 362–69.10.1016/j.proeng.2011.04.062 ↗
25. J.B. de Jonge and D.J. Spiekhout: in Service Fatigue Loads Monitoring, Simulation, and Analysis, ASTM STP 671, P.R. Abelkis and J.M. Potter eds., ASTM International, West Conshohocken, PA, 1979, pp. 48–66.10.1520/STP35865S ↗
26. R.J.H. Wanhill: NRL-TP-2001-545. NRL, Amsterdam, The Netherlands, 2001.
27. U.S. Committee on Extension of the Standard Atmosphere: NASA-TM-X-74335 (NOAA-S/T 76-1562), NASA/NOAA/USAF, Washington, D.C., 1976.
28. D.A. Skinn, J.P. Gallagher, A.P. Berens, P.D. Huber, and J. Smith: WL-TR-94-0452. AFRL/Materials Directorate, Wright-Patterson AFB, OH, 1994.
29. J.T. Burns, R.P. Gangloff, R.W. Bush, in: DoD/NACE Corrosion Conference, Palm Springs, CA, 2011.
30. R.P. Gangloff: in Fatigue 2002, A. Blom, ed., EMAS, Stockholm, Sweden, 2002.
31. J. Petit, G. Henaff, and C. Sarrazin-Baudoux: in Comprehensive Structural Integrity: Environmentally Assisted Fracture, J. Petit and P. Scott eds., Elsevier, New York, NY, 2003, pp. 962–70.
32. R.P. Wei, Fracture Mechanics: Integration of Mechanics, Materials Science, and Chemistry, Cambridge University Press, Cambridge, England; New York, NY, 2010.10.1017/CBO9780511806865 ↗
33. Y. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1449–65.10.1007/s11661-008-9522-5 ↗
34. Y.J. Ro, S.R. Agnew, G.H. Bray, and R.P. Gangloff: Mater. Sci. Eng. A, 2007, vol. 468, pp. 88–97.10.1016/j.msea.2007.01.155 ↗
35. S.P. Lynch: Corros. Sci., 1982, vol. 22, pp. 925–37.10.1016/0010-938X(82)90062-2 ↗
36. R.A. Oriani: Corrosion, 1987, vol. 43, pp. 390–97.10.5006/1.3583875 ↗
37. I.M. Robertson: Eng. Fract. Mech., 2001, vol. 68, pp. 671–92.10.1016/S0013-7944(01)00011-X ↗
38. F. Menan and G. Henaff: Mater. Sci. Eng. A, 2009, vol. 519, pp. 70–76.10.1016/j.msea.2009.04.058 ↗
39. Y. Murakami and S. Matsuoka: Eng. Fract. Mech., 2010, vol. 77, pp. 1926–40.10.1016/j.engfracmech.2010.04.012 ↗
40. S.P. Lynch: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, U.K., 2012, vol. 1, pp. 274–378.
41. I.M. Robertson, M.L. Martin, and J.A. Fenske: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, U.K., 2012, vol. 2, pp. 166–206.10.1533/9780857095374.1.166 ↗
42. Y. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 3042–62.10.1007/s11661-007-9344-x ↗
43. D.C. Slavik and R.P. Gangloff: Acta Mater., 1996, vol. 44, pp. 3515–34.10.1016/1359-6454(96)00013-4 ↗
44. V.K. Gupta and S.R. Agnew: Int. J. Fatig., 2011, vol. 33, pp. 1159–74.10.1016/j.ijfatigue.2011.01.018 ↗
45. D.C. Slavik, C.P. Blankenship, E.A. Starke, and R.P. Gangloff: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1807–17.10.1007/BF02657855 ↗
46. Y. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, 2012, in press.
47. Y. Ro, S.R. Agnew, and R.P. Gangloff: in Fourth International Conference on Very High Cycle Fatigue, J.E. Allison, J.W. Jones, J.M. Larsen, and R.O. Ritchie eds., TMS-AIME, Warrendale, PA, 2007, pp. 407–20.
48. R.P. Wei, P.S. Pao, R.G. Hart, T.W. Weir, and G.W. Simmons: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 151–58.10.1007/BF02700451 ↗
49. M. Gao, P.S. Pao, and R.P. Wei: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 1739–50.10.1007/BF02645142 ↗
50. P.S. Pao, M. Gao, and R.P. Wei: in Basic Questions in Fatigue, R.P. Wei and R.P. Gangloff eds., ASTM STP 924, ASTM International, West Conshohocken, PA, 1988, pp. 182–95.
51. R.P. Wei and M. Gao: in Hydrogen Effects on Material Behavior, N.R. Moody and A.W. Thompson eds., TMS-AIME, Warrendale, PA, 1990, pp. 789–813.
52. J.T. Burns, J.M. Larsen, and R.P. Gangloff: Fatig. Fract. Eng. M, 2011, vol. 34, pp. 745–73.10.1111/j.1460-2695.2011.01568.x ↗
53. D.L. McDowell, K. Gall, M.F. Horstemeyer, and J. Fan: Eng. Fract. Mech., 2003, vol. 70, pp. 49–80.10.1016/S0013-7944(02)00021-8 ↗
54. J.M. Papazian, E.L. Anagnostou, S.J. Engel, D. Hoitsma, J. Madsen, R.P. Silberstein, G. Welsh, and J.B. Whiteside: Eng. Fract. Mech., 2009, vol. 76, pp. 620–32.10.1016/j.engfracmech.2008.09.007 ↗
55. A. Shyam, J.E. Allison, C.J. Szczepanski, T.M. Pollock, and J.W. Jones: Acta Mater., 2007, vol. 55, pp. 6606–16.10.1016/j.actamat.2007.08.022 ↗
56. R. Jones, S. Pitt, and D. Peng: Eng. Fail. Anal., 2008, vol. 15m, pp. 1130–11.10.1016/j.engfailanal.2007.11.007 ↗
57. E.R. de los Rios and A. Navarro: Philos. Mag. A, 1990, vol. 61, pp. 435–49.10.1080/01418619008231926 ↗
58. J.A. Harter: http://www.stormingmedia.us/13/1340/A134073.html., AFRL/VASM, Wright-Patterson AFB, OH, 2008.
59. J. Payne, G. Welsh, R.J. Christ Jr., J. Nardiello, and J.M. Papazian: Int. J. Fatig., 2010, vol. 32, pp. 247–55.10.1016/j.ijfatigue.2009.06.003 ↗
60. ASTM G34-01, ASTM International, West Conshohocken, PA, 2007.
61. ASTM E466-07, ASTM International, West Conshohocken, PA, 2007.
62. ASTM E-1012-05, ASTM International, West Conshohocken, PA, 2005.
63. P.R. Wiederhold, Water Vapor Measurement Methods and Instrumentation, CRC Press, New York, NY, 1997.
64. ASTM E647-05, ASTM International, West Conshohocken, PA, 2006.
65. I.M. Chakravarti, R.G. Laha, J. Roy, Handbook of methods of applied statistics, Wiley, New York, 1967.
66. J.C. Newman and I.S. Raju: in Computational Methods in the Mechanics of Fracture, S.N. Atluri ed., Elsevier Science, New York, NY, 1986.
67. R.W. Bush and J.H. Ai: University of Virginia, Charlottesville, VA, unpublished research, 2010.
68. F.S. Lin and E.A. Starke: Mater. Sci. Eng., 1979, vol. 39, pp. 27–41.10.1016/0025-5416(79)90167-8 ↗
69. F.S. Lin and E.A. Starke: Mater. Sci. Eng., 1980, vol. 43, pp. 65–76.10.1016/0025-5416(80)90209-8 ↗
70. J. Ruiz and M. Elices: Acta Mater., 1997, vol. 45, pp. 281–93.10.1016/S1359-6454(96)00147-4 ↗
71. I.S. Cole, P.A. Corrigan, G.C. Edwards, D. Followell, S. Galea, W. Ganther, B.R. Hinton, T. Ho, C.J. Lewis, T.H. Muster, D. Paterson, D.C. Price, D.A. Scott, and P. Trathen: in Materials Forum, S. Galea and A. Mita eds., Institute of Materials Engineering Australiasia, North Melbourne, Australia, 2009, vol. 33, pp. 27–35.
72. I. Cole: DSTO, Melbourne, Australia, personal communication, 2011.
73. F.G. Nelson, J.G. Kaufman, in: Fracture Toughness Testing at Cryogenic Temperatures, ASTM STP 496, ASTM International, West Conshohocken, PA, 1971, pp. 27-39.10.1520/STP26927S ↗
74. Air Force Ballistic Missile Division, AF-04(647)-593-3, National Bureau of Standards/Cryogenic Engineering Laboratory, Boulder, CO, 1959.
75. K.V. Jata and E.A. Starke: Scripta Metall. Mater., 1988, vol. 22, pp. 1553–56.10.1016/S0036-9748(88)80037-1 ↗
76. T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, CRC Press, Boca Raton, FL, 1991.
77. Z.M. Gasem and R.P. Gangloff: in Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking: A Symposium Honoring the Contributions of R.W. Staehle, R.H. Jones ed., TMS-AIME, Warrendale, PA, 2001, pp. 501–21.
78. M. Wilhelm, M. Nageswararao, and R. Meyer: in Fatigue Mechanisms, J.T. Fong ed., ASTM STP 675, ASTM International, West Conshohocken, PA, 1979, pp. 214–33.
79. T.W. Weir, G.W. Simmons, R.G. Hart, and R.P. Wei: Scripta Metall. Mater., 1980, vol. 14, pp. 357–64.10.1016/0036-9748(80)90359-2 ↗
80. M. Watanabe: J. Phys. Chem. Solids, 2010, vol. 71, pp. 1251–58.10.1016/j.jpcs.2010.05.002 ↗
81. G.M. Scamans, R. Alani, and P.R. Swann: Corros. Sci., 1976, vol. 16, pp. 443–59.10.1016/0010-938X(76)90065-2 ↗
82. M. Francis: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 2012.
83. S.W. Smith and J.R. Scully: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 179–93.10.1007/s11661-000-0064-8 ↗
84. R.P. Wei: Fatig. Fract. Eng. M, 2002, vol. 25, pp. 845–54.10.1046/j.1460-2695.2002.00551.x ↗
85. R. Braun, H.J. Schluter, and H. Zuchner: in Hydrogen Transport and Cracking in Metals, A. Turnbull ed., The Institute of Metals, Teddington, U.K., 1994, pp. 280–88.
86. J.R. Scully, G.A. Young, and S.W. Smith: Mater. Sci. Forum, 2000, vol. 331–333, pp. 1583–99.10.4028/www.scientific.net/MSF.331-337.1583 ↗
87. J.R. Scully and G.A. Young: in Gaseous Hydrogen Embrittlement of Metals in Energy Technologies, R.P. Gangloff, B.P. Somerday eds., Woodhead Publishing Ltd., Cambridge, U.K., 2012, vol. 1, pp. 707–59.
88. G.A. Young and J.R. Scully: Acta Mater., 1998, vol. 46, pp. 6337–49.10.1016/S1359-6454(98)00333-4 ↗
89. A.S. El-Amoush: J. Alloys Compd., 2008, vol. 465, pp. 497–501.10.1016/j.jallcom.2007.10.126 ↗
90. N. Takano: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 336–39.10.1016/j.msea.2006.08.144 ↗
91. J.T. Burns: Ph.D. Dissertation, University of Virginia, Charlottesville, VA, 2010.
92. H.K. Birnbaum, C. Buckley, F. Zeides, E. Sirois, P. Rozenak, S. Spooner, and J.S. Lin: J. Alloys Compd., 1997, vol. 253, pp. 260–64.10.1016/S0925-8388(96)02968-4 ↗
93. K.R. Hebert, T. Gessmann, K.G. Lynn, and P. Asoka-Kumar: J. Electrochem. Soc., 2004, vol. 151, pp. B22–26.10.1149/1.1631821 ↗
94. O.D. Smiyan, M.V. Coval, R.K. Melekov, N.L. Korobanova, A.M. Krutsan, and V.A. Yakovchik: Soviet. Mater. Sci., 1983, vol. 19, pp. 422–26.10.1007/BF00721534 ↗
95. A.T. Kermanidis, P.V. Petroyiannis, and S.G. Pantelakis: Theory Appl. Fract. Mech., 2005, vol. 43, pp. 121–32.10.1016/j.tafmec.2004.12.008 ↗
96. P.V. Petroyiannis, A.T. Kermanidis, P. Papanikos, and S.G. Pantelakis: Theory Appl. Fract. Mech., 2004, vol. 41, pp. 173–83.10.1016/j.tafmec.2003.11.014 ↗
97. C. Atkinson: J. Appl. Phys., 1971, vol. 42, pp. 1994–97.10.1063/1.1660478 ↗
98. S. Adhikari, J.H. Ai, K.R. Hebert, K.M. Ho, and C.Z. Wang: Electrochim. Acta, 2010, vol. 55, pp. 5326–31.10.1016/j.electacta.2010.04.076 ↗
99. C.E. Buckley and H.K. Birnbaum: J. Alloys Compd., 2002, vol. 330, pp. 649–53.10.1016/S0925-8388(01)01496-7 ↗
100. D.M. Li, R.P. Gangloff, and J.R. Scully: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 849–64.10.1007/s11661-004-0011-1 ↗