Optimization of composition and heat treatment of age-hardened Pt−Al−Cr−Ni alloys
Source abstract
Abstract
The objective of this work was to produce an alloy showing a microstructure similar to Ni-base superalloys, but with Pt as base metal. The Pt-base alloys with various contents of Al, Cr, and Ni were are melted. Solution heat treatments at 1450 °C followed by water quenching lead to single-phase alloys. Ageing at 1000 °C resulted in the precipitation of L12 ordered particles. An alloy with 11 at. pct Al, 3 at. pct Cr, 6 at. pct Ni, and Pt balance shows cuboidal precipitates with edge lengths of 200 to 500 nm along with a volume fraction of 23 pct and a lattice misfit of −0.1 pct. Aging at 1100 °C leads to coarsening of precipitates. Volume fraction and morphology of the precipitates were investigated by scanning electron microscopy and optical microscopy. X-ray diffraction as well as transmission electron microscopy (TEM) were applied to verity the crystal structure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. D.M. Wee and T. Suzuki: Trans. Jpn. Inst. Met., 1979, vol. 20, pp. 634–46.10.2320/matertrans1960.20.634 ↗
2. B.H. Kear and G.F. Wilsdorf: Trans. TMS-AIME, 1962, vol. 224 (4), pp. 382–86.
3. S.M. Copley and B.H. Kear: Trans. TMS-AIME, 1967, vol. 239, pp. 984–92.
4. S. Takeuchi and E. Kuramoto: J. Phys. Soc. Jpn., 1971, vol. 31, p. 1282.10.1143/JPSJ.31.1282 ↗
5. S. Takeuchi and E. Kuramoto: Acta Metall., 1973, vol. 21, pp. 415–25.10.1016/0001-6160(73)90198-3 ↗
6. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II: High Temperature Materials for Aerospace and Industrial Power, Wiley-Interscience, New York, NY, 1987.
7. Y. Yamabe, Y. Koizumi, Murakami, Y. Ro, T. Maruko, and H. Harada: Scripta Mater, 1996, vol. 35 (2), pp. 211–15.10.1016/1359-6462(96)00109-1 ↗
8. Y. Yamabe-Mitarai, Y. Koizumi, Murakami, Y. Ro, T. Maruko, and Harada: Scripta Mater., 1997, vol. 36 (4), pp. 393–98.10.1016/S1359-6462(96)00408-3 ↗
9. Y. Yamabe-Mitarai, Y. Ro, T. Maruko, and Harada: Intermetallics, 1999, vol. 7, pp. 49–58.10.1016/S0966-9795(98)00010-7 ↗
10. X.H. Yu, Y. Yamabe-Mitarai, Y. Ro, and Harada: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 173–78.10.1007/s11661-000-0063-9 ↗
11. P. Panfilov, A. Yermarkov, V. Dmitriev, and N. Timofeev: Platinum Met. Rev., 1991, vol. 35, pp. 196–200.10.1595/003214091X354196200 ↗
12. G.B. Fairbank, C.J. Humphreys, A. Kelly, and C.N. Jones: Intermetallics, 2000, vol. 8 (9), pp. 1091–1100.10.1016/S0966-9795(00)00040-6 ↗
13. P.J. Hill, G.B. Fairbank, and L.A. Cornish: JOM, 2001, vol. 53, pp. 19–20.10.1007/s11837-001-0049-0 ↗
14. P.J. Hill, N. Adams, T. Biggs, P. Ellis, T. Hohls, S.S. Taylor, and I.M. Wolff: Mater. Sci. Eng. A, 2002, vol. 329, pp. 295–304.10.1016/S0921-5093(01)01577-5 ↗
15. P.J. Hill, T. Biggs, P. Ellis, J. Hohls, S. Taylor, and I.M. Wolff: Mater. Sci. Eng., 2001, vol. A301, pp. 167–79.10.1016/S0921-5093(00)01471-4 ↗
16. P.J. Hill, L.A. Cornish, and M.J. Witcomb: Proc. Int. Symp. on High Temperature Corrosion and Protection, 2000, pp. 185–90.
17. P.J. Hill, L.A. Cornish, P. Ellis, and M.J. Witcomb: J. Alloys Compounds, 2001, vol. 322, pp. 166–75.10.1016/S0925-8388(01)01018-0 ↗
18. P.J. Hill, Y. Yamabe-Mitarai, H. Murakami, L.A. Cornish, M.J. Witcomb, I.M. Wolff, and H. Harada: in Structural Intermetallics, 2001, K.J. Hemker, ed., TMS, Warrendale, PA, 2002, pp. 527–33.
19. L.A. Cornish, J. Hohls, P.J. Hill, S. Prins, R. Süss, and D.N. Compton: J. Mining Metall., 2002, vol. 38B (3–4), pp. 197–204.10.2298/JMMB0204197C ↗
20. R. Süss, D. Freund, R. Völkl, B. Fischer, P.J. Hill, P. Ellis, and I.M. Wolff: Mater. Sci. Eng. A, 2002, vol. 338, pp. 133–41.10.1016/S0921-5093(02)00068-0 ↗
21. L.A. Cornish, B. Fischer, and R. Völkl: MRS Bull., 2003, vol. 28 (9), pp. 632–38.10.1557/mrs2003.190 ↗
22. Y. Yamabe-Mitarai, M.H. Hong, Y. Ro, and H. Harada: Phil. Mag. Lett., 1999, vol. 79 (9), pp. 673–82.10.1080/095008399176715 ↗
23. Y. Mishima, Y. Oya, and T. Suzuki: Proc. Int. Conf. on Martensitic Transformations, The Japan Institute of Metals JIM, 1986, pp. 1009–14.
24. Y. Oya, Y. Mishima, and T. Suzuki: Z. Metallkd., 1987, vol. 78 (7), pp. 485–90.
25. T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990.
26. Y. Yamabe-Mitarai and H. Aoki: J. Alloys Compounds, 2003, vol. 359, pp. 143–52.10.1016/S0925-8388(03)00186-5 ↗
27. C. Huang, Y. Yamabe-Mitarai, K. Nishida, and H. Harada: Intermetallics, 2003, vol. 11, pp. 917–26.10.1016/S0966-9795(03)00104-3 ↗
28. C. Huang, Y. Yamabe-Mitarai, and H. Harada: J. Alloys Compounds, 2004, vol. 366, pp. 217–21.10.1016/S0925-8388(03)00748-5 ↗
29. H. Meininger and M. Ellner: J. Alloys Compounds, 2003, vol. 353, pp. 207–12.10.1016/S0925-8388(02)01212-4 ↗
30. J.C. Zhao: J. Mater. Res., 2001, vol. 16, pp. 1565–78.10.1557/JMR.2001.0218 ↗
31. M.V. Whalen: Platinum Met. Rev., 1988, vol. 32 (1), pp. 2–10.10.1595/003214088X321210 ↗
32. D. Lupton, J. Merker, B. Fischer, and R. Völkl: 6th Int. Conf. Advances in Fusion & Processing of Glass, Ulm, Germany, May 29-31, 2000
33. Proc.: Glass Science and Technology · Glastechnische Berichte, Helmut A. Schaeffer and James R. Varner, eds., Frankfurt/Main vol. 73C2, 2000, pp. 284-93.
34. J.L. Kamm and W.W. Milligan: Scripta Metall. Mater., 1994, vol. 31 (11), pp. 1461–64.10.1016/0956-716X(94)90056-6 ↗
35. Metals Handbook, 9th ed, K. Mills, J.R. Davis, J.D. Destefani, D.A. Dietrich, G.M. Crankovic, J. Frissel, D.M. Jenkins, W.H. Cubberly, and R.L. Stedfeld, eds., ASM, Metals Park, OH, 1985, vol. 9.
36. M.R. Jackson and J.R. Rairden: Metall. Trans. A, 1977, vol. 8A, pp. 1697–1707.10.1007/BF02646872 ↗
37. Y.Y. Qiu: J. Alloys Compounds, 1996, vol. 232, pp. 254–63.10.1016/0925-8388(95)01914-6 ↗
38. D. Siebörger, H. Brehm, F. Wunderlich, D. Möller, and U. Glatzel: Z. Metallkd., 2001, vol. 92, pp. 58–61.