journal article·2008-10

Modification of Sensitization Resistance of AISI 304L Stainless Steel through Changes in Grain Size and Grain Boundary Character Distributions

Raghuvir Singh, Sandip Ghosh Chowdhury, Indranil Chattoraj

Publisher page

Abstract

Sensitization behavior of thermomechanically processed AISI 304L stainless steel has been investigated. The mechanical processing was carried out at deformations of 30 to 90 pct (reduction in thickness), and annealed subsequently at temperatures ranging from 800 °C to 950 °C for 15 to 60 minutes. Stainless steel was then sensitized at 675 °C both for short (2 hours) and long (53 hours) durations. Thus treated specimens were characterized for grain boundary character distribution, grain size, and degree of sensitization (DOS). The increase in annealing temperature and time following mechanical processing showed an increase in grain size (up to 37 μm) and in the DOS. The fraction of coincident site lattice (CSL) boundaries (Σ3 to Σ29) was also noticed to increase with the annealing temperature, which implied that an increasing fraction of low energy boundaries did not cause a decrease in the DOS. The grain size through its effect on grain boundary surface area and the effective grain boundary energy correlated well with the extent of sensitization. Grain growth reduces the grain boundary surface area and the effective grain boundary energy as well, which, in turn, enhanced the DOS. A critical grain size (∼ 0.05), above which, sensitization reduced to insignificant levels was observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. C.L. Briant, R.A. Mulford, E.L. Hall: Corrosion, 1982, vol. 38, pp. 468–7710.5006/1.3577362 ↗
2. R.S. Dutta, P.K. De, H.S. Gadiyar: Corros. Sci., 1993, vol. 34, pp. 51–6010.1016/0010-938X(93)90258-I ↗
3. N. Parvathavarthini, R.K. Dayal, J.B. Gnanamoorthy: J. Nucl. Mater., 1994, vol. 208, pp. 251–5810.1016/0022-3115(94)90334-4 ↗
4. T. Watanabe: Res. Mechanica, 1984, vol. 11, pp. 47–84
5. C.B. Thomson, V. Randle: Acta Mater., 1997, vol. 45, pp. 4909–1610.1016/S1359-6454(97)00192-4 ↗
6. G. Palumbo: U.S. Patent No. 5, 817 (1998) 193
7. P. Lin, G. Palumbo, U. Erb, K.T. Aust: Scripta Metall. Mater., 1995, vol. 33, pp. 1387–9210.1016/0956-716X(95)00420-Z ↗
8. E.M. Lehockey, D. Limoges, G. Palumbo, J. Sklarchuk, K. Tomanster, A. Vinczc: J. Power Sources, 1999, vol. 78, pp. 79–8310.1016/S0378-7753(99)00015-4 ↗
9. G. Palumbo: U.S. Patent No. 5, 702 (1997) 543
10. G. Palumbo: U.S. Patent No. 5, 817 (1998) 193
11. H. Kokawa, M. Shimada, Y.S. Sato: JOM, 2000, vol. 52, pp. 34–3710.1007/s11837-000-0159-0 ↗
12. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–4110.1016/S1359-6454(02)00064-2 ↗
13. D.N. Wasnik, V. Kain, I. Samajdar, B. Verlinden, P.K. De: Acta Mater., 2002, vol. 50, pp. 4587–0110.1016/S1359-6454(02)00306-3 ↗
14. B. Alexandreanu, B. Capell, G.S. Was: Mater. Sci. Eng., 2001, vol. A300, pp. 94–10410.1016/S0921-5093(00)01705-6 ↗
15. E.M. Lehockey, G. Palumbo: Mater. Sci. Eng., 1997, vol. A237, pp. 168–7210.1016/S0921-5093(97)00126-3 ↗
16. G.S. Was, V. Thaveeprungsriporn, D.C. Crawford: JOM, 1998, vol. 50, pp. 44–4910.1007/s11837-998-0249-y ↗
17. G.S. Was, B. Alexandreanu, P. Andresen, M. Kumar: Mater. Res. Soc. Symp. Proc., 2004, vol. 819, p. N2.1.1
18. G. Palumbo, K.T. Aust: Mater. Sci. Eng., 1989, vol. A113, pp. 139–4710.1016/0921-5093(89)90300-6 ↗
19. G. Palumbo, K.T. Aust: Acta Metall. Mater., 1990, vol. 38, pp. 2343–5210.1016/0956-7151(90)90101-L ↗
20. G. Palumbo, P.J. King, K.T. Aust, U. Erb, P.C. Lichtenberger: Scripta Metall. Mater., 1991, vol. 28, pp. 1775–8010.1016/0956-716X(91)90303-I ↗
21. K.T. Aust, U. Erb, G. Palumbo: Mater. Sci. Eng., 1994, vol. A176, pp. 329–3410.1016/0921-5093(94)90995-4 ↗
22. C. Cheung, U. Erb, G. Palumbo: Mater. Sci. Eng., 1994, vol. A185, pp. 39–4310.1016/0921-5093(94)90925-3 ↗
23. G. Palumbo, E.M. Lehockey, P. Lin, U. Erb, and K.T. Aust: Interfacial Engineering for Optimized Properties, Materials Research Society Symposia Proceedings, C.L. Briant, C.B. Carter, and E.L. Hall, eds., Materials Research Society, Pittsburgh, PA, 1997, vol. 458, pp. 273–8210.1557/PROC-458-273 ↗
24. E.M. Lehockey, G. Palumbo, P. Lin, and A. Brennenstuhl: in Microscopy and Microanalysis, G.W. Bailey, J.M. Corbett, R.V. Dimlich, J.R. Michael, and N.J. Zaluzec, eds., San Francisco Press, CA, 1996, pp. 346–5110.1017/S0424820100164192 ↗
25. E.M. Lehockey, G. Palumbo, A. Brennenstuhl, and P. Lin: Interfacial Engineering for Optimized Properties, Materials Research Society Symposia Proceedings, C.L. Briant, C.B. Carter, and E.L. Hall, eds., Materials Research Society, Pittsburgh, PA, 1997, vol. 458, p. 243–4810.1557/PROC-458-243 ↗
26. E.M. Lehockey, G. Palumbo, P. Lin, A. Brennenstuhl: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 387–9610.1007/s11661-998-0190-2 ↗
27. E.M. Lehockey, A. Brennenstuhl, G. Palumbo, P. Lin: Br. Corr. J., 1998, vol. 33, pp. 29–3410.1179/bcj.1998.33.1.29 ↗
28. M. Kumar, W.E. King, A.J. Schwartz: Acta Mater., 2000, vol. 48, pp. 2081–9110.1016/S1359-6454(00)00045-8 ↗
29. V. Randle: Acta Mater., 2004, vol. 52, pp. 4067–8110.1016/j.actamat.2004.05.031 ↗
30. V. Randle, G. Owen: Acta Mater., 2006, vol. 54, pp. 1777–8310.1016/j.actamat.2005.11.046 ↗
31. C.A. Schuh, M. Kumar, W.E. King: Acta Mater., 2003, vol. 51, pp. 687–70010.1016/S1359-6454(02)00447-0 ↗
32. V. Randle: Scripta Mater., 2006, vol. 54, pp. 1011–1510.1016/j.scriptamat.2005.11.050 ↗
33. D.P. Field, B.L. Adams: Acta Metall. Mater., 1992, vol. 40, pp. 1145–5710.1016/0956-7151(92)90413-9 ↗
34. N.A. Gjostein, F.N. Rhines: Acta Metall., 1959, vol. 7, pp. 319–3010.1016/0001-6160(59)90198-1 ↗
35. D.W. Readey, R.E. Jech: J. Am. Ceram. Soc., 1968, vol. 51, pp. 201–0410.1111/j.1151-2916.1968.tb11873.x ↗
36. G. Dhalenne, M. Dechamps, A. Revcolevschi: J. Am. Ceram. Soc., 1982, vol. 65, pp. C11–1210.1111/j.1151-2916.1982.tb09931.x ↗
37. G.C. Hasson, C. Goux: Scripta Metall., 1971, vol. 5, pp. 889–9410.1016/0036-9748(71)90064-0 ↗
38. T.I. Zhukova, L.K. Fionava: Sov. Phys Solid State, 1983, vol. 25, pp. 472–78
39. M.J. McLean: Mater. Sci., 1973, vol. 8, pp. 571–7510.1007/BF00550462 ↗
40. A. Otsuki: Acta Mater., 2001, vol. 49, pp. 737–4110.1016/S1359-6454(01)00090-8 ↗
41. C. Stawström, M. Hillert: JISI, 1969, vol. 207, pp. 77–85
42. V. Cihal: Intergranular Corrosion of Steel and Alloys, Elsevier Science Publishing Co., New York, NY, 1984, pp. 141–45
43. T. Sourmail, C.H. Too, H.K.D.H. Bhadeshia: ISIJ, 2003, vol. 43, pp. 1814–2010.2355/isijinternational.43.1814 ↗
44. R. Beltran, J.G. Maldonaldo, L.E. Murr, W.W. Fisher: Acta Mater., 1997, vol. 45, pp. 4351–6010.1016/S1359-6454(97)00106-7 ↗
45. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–8410.1016/0001-6160(66)90168-4 ↗
46. P. Lin, G. Palumbo, U. Erb, K.T. Aust: Scripta Metall. Mater., 1997, vol. 20, pp. 1145–4910.1016/S1359-6462(97)00010-9 ↗
47. G. Palumbo, K.T. Aust, U. Erb, P.J. King, A.M. Brennestuhl, P.C. Lichtenberger: Phys. Status Solidi A, 1992, vol. A131, pp. 425–2810.1002/pssa.2211310216 ↗
48. D.H. Warington, M. Boon: Acta Mater., 1975, vol. 23, pp. 599–60710.1016/0001-6160(75)90100-5 ↗
49. E.M. Lehockey, A.M. Brennenstuhl, I. Thompson: Corros. Sci., 2004, vol. 46, pp. 2383–40410.1016/j.corsci.2004.01.019 ↗
50. V. Randle: JOM, 1998, vol. 50, pp. 56–5910.1007/s11837-998-0251-4 ↗
51. T. Watanabe: Text. Microstruct., 1993, vol. 20, pp. 195–9910.1155/TSM.20.195 ↗
52. S. Tsurekawa, S. Nakamichi, T. Watanabe: Acta Mater., 2006, vol. 54, pp. 3617–2610.1016/j.actamat.2006.03.048 ↗
53. B.M. Guyot, N.L. Richards: Mater. Sci. Eng., 2005, vol. A395, pp. 87–9710.1016/j.msea.2004.12.021 ↗
54. J. Hirsch: 7th Int. Symp. Risø, N. Hansen, D. Juul Jensen, T. Leffers, and B. Ralph, eds., Riso Laboratory, Denmark, 1986, pp. 349–60
55. S.G. Chowdhury, S. Dutta, B. Ravi Kumar, P.K. De, R.N. Ghosh: Mater. Sci. Eng., 2007, vol. A443, pp. 114–2010.1016/j.msea.2006.09.059 ↗
56. S.G. Chowdhury, S. Das, B. Ravi Kumar, P.K. De: Metall. Mater. Trans., 2006, vol. 37A, pp. 2349–5910.1007/BF02586209 ↗
57. S. Mahajan, C.S. Pande, M.A. Imam, B.B. Rath: Acta Mater., 1997, vol. 45, pp. 2633–3810.1016/S1359-6454(96)00336-9 ↗
58. C.S. Pande, M.A. Imam, B.B. Rath: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 2891–9610.1007/BF02647209 ↗
59. G. Baro, H. Gleiter: Z. Metallkd., 1972, vol. 63, pp. 661–67
60. V.Y. Gertsman, S.M. Bruemmer: Acta Mater., 2001, vol. 49, pp. 1589–9810.1016/S1359-6454(01)00064-7 ↗
61. H. Lin, D.P. Pope: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 394–9810.1016/0921-5093(94)03239-4 ↗
62. D. Wolf: in Materials Interfaces, Atomic Level Structure and Properties, D. Wolf, S. Yip, eds., Chapmann and Hall, London, 1992, p. 1
63. E.A. Trillo: Acta Mater., 1999, vol. 47, pp. 235–4510.1016/S1359-6454(98)00322-X ↗
64. ASTM Standard Designation A262-Practice A-F, 1994, ASTM, Philadelphia, PA, 1993, vol. 03.02, pp. 1–16