Particle-Size-Grouping Model of Precipitation Kinetics in Microalloyed Steels
Source abstract
Abstract
The formation, growth, and size distribution of precipitates greatly affects the microstructure and properties of microalloyed steels. Computational particle-size-grouping (PSG) kinetic models based on population balances are developed to simulate precipitate particle growth resulting from collision and diffusion mechanisms. First, the generalized PSG method for collision is explained clearly and verified. Then, a new PSG method is proposed to model diffusion-controlled precipitate nucleation, growth, and coarsening with complete mass conservation and no fitting parameters. Compared with the original population-balance models, this PSG method saves significant computation and preserves enough accuracy to model a realistic range of particle sizes. Finally, the new PSG method is combined with an equilibrium phase fraction model for plain carbon steels and is applied to simulate the precipitated fraction of aluminum nitride and the size distribution of niobium carbide during isothermal aging processes. Good matches are found with experimental measurements, suggesting that the new PSG method offers a promising framework for the future development of realistic models of precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. C. Zener: Trans. Am. Inst. Miner. Metall. Soc., 1948, vol. 175, pp. 15-51.
2. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227-38.10.1016/0001-6160(65)90200-2 ↗
3. T. Gladman: Proc. Roy. Soc. London Ser. A, 1966, vol. 294, pp. 298-309.10.1098/rspa.1966.0208 ↗
4. P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913-24.10.2355/isijinternational.38.913 ↗
5. N. Yoshinaga, K. Ushioda, S. Akamatsu, and O. Akisue: ISIJ Int., 1994, vol. 34, pp. 24-32.10.2355/isijinternational.34.24 ↗
6. E.E. Kashif, K. Asakura, T. Koseki, and K. Shibata: ISIJ Int., 2004, vol. 44, pp. 1568-75.10.2355/isijinternational.44.1568 ↗
7. S.C. Park, I.H. Jung, K.S. OH, and H.G. Lee: ISIJ Int., 2004, vol. 44, pp. 1016-23.10.2355/isijinternational.44.1016 ↗
8. Y. Li, J.A. Wilson, D.N. Crowther, P.S. Mitchell, A.J. Craven, and T.N. Baker: ISIJ Int., 2004, vol. 44, pp. 1093-1102.10.2355/isijinternational.44.1093 ↗
9. R.L. Klueh, K. Shiba, and M.A. Sokolov: J. Nucl. Mater., 2008, vol. 377, pp. 427-37.10.1016/j.jnucmat.2008.04.002 ↗
10. J.Y. Choi, B.S. Seong, S.C. Baik, and H.C. Lee: ISIJ Int., 2002, vol. 42, pp. 889-93.10.2355/isijinternational.42.889 ↗
11. B.J. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2423-39.10.1007/s11661-001-0033-x ↗
12. R.C. Hudd, A. Jones, and M.N. Kale: J. Iron Steel Inst., 1971, vol. 209, pp. 121-25.
13. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, UK, 1997, pp. 82-130.
14. W.J. Liu and J.J. Jonas: Metall. Trans. A, 1989, vol. 20A, pp. 1361-74.10.1007/BF02665494 ↗
15. N. Gao and T.N. Baker: ISIJ Int., 1997, vol. 37, pp. 596-604.10.2355/isijinternational.37.596 ↗
16. J.Y. Park, J.K. Park, and W.Y. Choo: ISIJ Int., 2000, vol. 40, pp. 1253-59.10.2355/isijinternational.40.1253 ↗
17. K. Xu, B.G. Thomas, and R. O’Malley: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 524-39.10.1007/s11661-010-0428-7 ↗
18. A.N. Kolmogorov: Izv. Akad. Nauk SSSR, Ser. Fiz., 1937, vol. 1, pp. 335-38.
19. W.A. Johnson and R.F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416-42.
20. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103-12; 1940, vol. 8, pp. 212-24; 1941, vol. 9, pp. 177-83.10.1063/1.1750380 ↗
21. J.W. Christian: The Theory of Transformation in Metals and Alloys. Part I, Pergamon Press, Oxford, UK, 1975.
22. N.Y. Zolotorevsky, V.P. Pletenev, and Y.F. Titovets: Model. Simul. Mater. Sci. Eng., 1998, vol. 6, pp. 383-91.10.1088/0965-0393/6/4/007 ↗
23. H.C. Kang, S.H. Lee, D.H. Shin, K.J. Lee, S.J. Kim, and K.S. Lee: Mater. Sci. Forum, 2004, vols. 449-452, pp. 49-52.10.4028/www.scientific.net/MSF.449-452.49 ↗
24. M. Smoluchowski: Z. Phys. Chem., 1917, vol. 92, pp. 127-55.
25. P.G. Saffman and J.S. Turner: J. Fluid Mech., 1956, vol. 1, pp. 16-30.10.1017/S0022112056000020 ↗
26. U. Lindborg and K. Torssell: Trans. TMS-AIME, 1968, vol. 242, pp. 94-102.
27. S.K. Friedlander and C.S. Wang: J. Colloid Interface Sci., 1966, vol. 22, pp. 126-32.10.1016/0021-9797(66)90073-7 ↗
28. V.G. Levich: Physicochemical Hydrodynamics, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1962, pp. 211.
29. D. Turnbull and J.C. Fisher: J. Chem. Phys., 1949, vol. 17, pp. 71-73.10.1063/1.1747055 ↗
30. W.J. Liu and J.J. Jonas: Metall. Trans. A, 1989, vol. 20A, pp. 689-97.10.1007/BF02667586 ↗
31. W.J. Liu and J.J. Jonas: Metall. Trans. A, 1988, vol. 19A, pp. 1403-13.10.1007/BF02674014 ↗
32. W. Ostwald: Lehrbruck der allgemeinen Chemie, 1896, vol. 2, Leipzig, Germany.
33. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
34. C. Wagner: Zeitschrift Zeitschr. Elektrochemie, 1961, vol. 65, pp. 581-91.
35. C. Zener: J. Appl. Phys., 1949, vol. 20, pp. 950-53.10.1063/1.1698258 ↗
36. K.C. Russell: Adv. Colloid Interface Sci., 1980, vol. 13, pp. 205-318.10.1016/0001-8686(80)80003-0 ↗
37. H.I. Aaronson, L. Laird, and K.R. Kinsman: Phase Transformations, Ed. H.I. Aaronson, ASM, Materials Park, OH, 1970, pp. 313-96.
38. M. Kahlweit: Adv. Colloid Interface Sci., 1975, vol. 5, pp. 1-35.10.1016/0001-8686(75)85001-9 ↗
39. J. Miyake and M.E. Fine: Scripta Metall. Mater., 1991, vol. 25, pp. 191-94.10.1016/0956-716X(91)90379-F ↗
40. R. Kampmann, H. Eckerlebe, and R. Wagner: Mater. Res. Soc. Symp. Proc., 1987, vol. 57, pp. 526-42.
41. L.M. Cheng, E.B. Hawbolt, and T.R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1907-16.10.1007/s11661-000-0218-8 ↗
42. F. Perrard, A. Deschamps, and P. Maugis: Acta Mater., 2007, vol. 55, pp. 1255-66.10.1016/j.actamat.2006.10.003 ↗
43. J. Stávek and M. Šípek: Cryst. Res. Technol., 1995, vol. 30, pp. 1033-49.10.1002/crat.2170300802 ↗
44. S. Müller, C. Wolverton, L.W. Wang, and A. Zunger: Europhys. Lett., 2001, vol. 55, pp. 33-39.10.1209/epl/i2001-00377-0 ↗
45. E. Clouet, M. Nastar, and C. Sigli: Phys. Rev. B, 2004, vol. 69, p. 064109.10.1103/PhysRevB.69.064109 ↗
46. C. Hin, B.D. Wirth, and J.B. Neaton: Phys. Rev. B, 2009, vol. 80, p. 134118.10.1103/PhysRevB.80.134118 ↗
47. R. Mukherjee, T.A. Abinandanan, and M.P. Gururajan: Acta Mater., 2009, vol. 57, pp. 3947-54.10.1016/j.actamat.2009.04.056 ↗
48. R. Mukherjee, T.A. Abinandanan, and M.P. Gururajan: Scripta Mater., 2010, vol. 62, pp. 85-88.10.1016/j.scriptamat.2009.09.030 ↗
49. Y. Tsukada, A. Shiraki, Y. Murata, S. Takaya, T. Koyama, and M. Morinaga: J. Nucl. Mater., 2010, vol. 401, pp. 154-58.10.1016/j.jnucmat.2010.04.017 ↗
50. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A, 2004, vol. 385, pp. 166-74.
51. E. Hozeschnik, J. Svoboda, P. Fratzl, and F.D. Fischer: Mater. Sci. Eng. A, 2004, vol. 385, pp. 157-65.
52. E. Kozeschnik, J. Svoboda, R. Radis, and F.D. Fischer: Model. Simul. Mater. Sci. Eng., 2010, vol. 18, p. 015011.10.1088/0965-0393/18/1/015011 ↗
53. E. Clouet, A. Barby, L. Laé, and G. Martin: Acta Mater., 2005, vol. 52, pp. 2313-25.10.1016/j.actamat.2005.01.038 ↗
54. J. Lepinoux: Acta Mater., 2009, vol. 57, pp. 1086-94.10.1016/j.actamat.2008.10.048 ↗
55. J. Lepinoux: Philos. Mag., 2010, vol. 90, pp. 3261-80.10.1080/14786435.2010.484403 ↗
56. L. Kampmann and M. Kahlweit: Ber. Bunsenges. Phys. Chem., 1970, vol. 74, pp. 456-62.10.1002/bbpc.19700740508 ↗
57. J. Zhang and H. Lee: ISIJ Int., 2004, vol. 44, pp. 1629-38.10.2355/isijinternational.44.1629 ↗
58. Y.J. Kwon, J. Zhang, and H.G. Lee: ISIJ Int., 2008, vol. 48, pp. 891-900.10.2355/isijinternational.48.891 ↗
59. N. Zhang and Z.C. Zheng: J. Phys. D: Appl. Phys., 2007, vol. 40, pp. 2603-12.10.1088/0022-3727/40/8/027 ↗
60. Y. Miki, B.G. Thomas, A. Denissov, and Y. Shimada: Ironmaker Steelmaker, 1997, vol. 24, pp. 31-38.
61. Y. Miki and B.G. Thomas: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 639-54.10.1007/s11663-999-0025-6 ↗
62. L. Zhang, S. Tanighchi, and K. Cai: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 253-66.10.1007/s11663-000-0044-9 ↗
63. D. Sheng, M. Söder, P. Jönsson, and L. Jonsson: Scand. J. Metall., 2002, vol. 31, pp. 134-47.10.1034/j.1600-0692.2002.310208.x ↗
64. M. Hallberg, P.G. Jönsson, T.L.I. Jonsson, and R. Eriksson: Scand. J. Metall., 2005, vol. 34, pp. 41-56.10.1111/j.1600-0692.2005.00716.x ↗
65. T. Nakaoka, S. Taniguchi, K. Matsumoto, and S.T. Johansen: ISIJ Int., 2001, vol. 41, pp. 1103-11.10.2355/isijinternational.41.1103 ↗
66. L. Zhang and W. Pluschkell: Ironmaking Steelmaking, 2003, vol. 30, pp. 106-10.10.1179/030192303225001766 ↗
67. F. Gelbard, Y. Tambour, and J.H. Seinfeld: J. Colloid Interface Sci., 1980, vol. 76, pp. 541-56.10.1016/0021-9797(80)90394-X ↗
68. J.J. Wu and R.C. Flagan: J. Colloid Interface Sci., 1988, vol. 123, pp. 339-52.10.1016/0021-9797(88)90255-X ↗
69. H. Tozawa, Y. Kato, K. Sorimachi, and T. Nakanishi: ISIJ Int., 1999, vol. 39, pp. 426-34.10.2355/isijinternational.39.426 ↗
70. K. Higashitani, Y. Yamauchi, Y. Matsuno, and G. Hosokawa: J. Chem. Eng. Jpn., 1983, vol. 116, pp. 299-304.10.1252/jcej.16.299 ↗
71. F. Vodopivec: J. Iron Steel Inst., 1973, vol. 211, pp. 664-65.
72. H.F. Beeghly: Ind. Eng. Chem., 1942, vol. 14, pp. 137-40.
73. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, UK, 1997, pp. 206-07.
74. H. Oikawa: Tetsu-to-Hagane, 1982, vol. 68, pp. 1489-97.10.2355/tetsutohagane1955.68.10_1489 ↗
75. W.C. Leslie, R.L. Rickett, C.L. Dotson, and C.S. Walton: Trans. Am. Soc. Metall., 1954, vol. 46, pp. 1470-99.
76. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, pp. 221-86.10.1179/095066088790324102 ↗
77. R. Radis and E. Kozeschnik: Mater. Sci. Forum, 2010, vols. 636–637, pp. 605–11.10.4028/www.scientific.net/MSF.636-637.605 ↗
78. R. Radis and E. Kozeschnik: Model. Simul. Mater. Sci. Eng., 2010, vol. 18, p. 055003.10.1088/0965-0393/18/5/055003 ↗
79. F. Perrard, A. Deschamps, F. Bley, P. Donnadieu, and P. Maugis: J. Appl. Crystallogr., 2006, vol. 39, pp. 473-82.10.1107/S002188980601301X ↗
80. J. Geise and C. Herzig: Z. Metallkd, 1985, vol. 76, pp. 622-26.
81. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, UK, 1997, pp. 82-130.
82. E.K. Strorms and N.H. Krikorian: J. Phys. Chem., 1960, vol. 64, pp. 1471-77.10.1021/j100839a029 ↗
83. S.M. He, N.H. Van Dijk, M. Paladugu, H. Schut, J. Kohlbrecher, F.D. Tichelaar, and S. Van Der Zwaag: Phys. Rev. B, 2010, vol. 82, p. 174111.10.1103/PhysRevB.82.174111 ↗
84. F.F. Abraham: Homogeneous Nucleation Theory. Academic Press, New York, NY, 1974.10.1063/1.3129038 ↗
85. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197-206.10.1179/mst.1987.3.3.197 ↗
86. J.P. Michel and J.J. Jonas: Acta Metall., 1981, vol. 29, pp. 513-26.10.1016/0001-6160(81)90075-4 ↗
87. A. LE Bon, J. Rofes-Vernis, and C. Rossard: Met. Sci., 1975, vol. 9, pp. 36-40.10.1179/030634575790444919 ↗
88. A.R. Jones, P.R. Howell, and B. Ralph: J. Mater. Sci., 1976, vol. 11, pp. 1600-06.10.1007/BF00737515 ↗
89. D. Turnbull: Impurities and Imperfections, Seminar Proceedings, ASM, Cleveland, OH, 1955, pp. 121-44.
90. W.J. Liu and J.J. Jonas: Mater. Sci. Technol., 1989, vol. 5, pp. 8-12.10.1179/mst.1989.5.1.8 ↗
91. J.H. Van Der Merwe: J. Appl. Phys., 1963, vol. 34, pp. 117–22.10.1063/1.1729050 ↗
92. R.G. Baker and J. Nutting: Precipitation Process in Steels, Special Report No. 64, The Iron and Steel Institute, London, UK, 1959, pp. 1–22.
93. H. Shoji: Z. Kristallogr., 1931, vol. 77, pp. 381-410.10.1524/zkri.1931.77.1.381 ↗
94. Z. Nishiyama: Science Report, Tohoku Imperial Univ., 1936, vol. 25, pp. 79.
95. W.G. Burgers: Physica, 1934, vol. 1, pp. 561-86.10.1016/S0031-8914(34)80244-3 ↗
96. N.W. Chase, Jr.: NIST-JANAF Thermochemical Tables, 4th ed., J. Phys. Chem. Ref. Data, 1998, pp. 1–1951.
97. L.E. Toth: Transaction Metal Carbides and Nitrides, Academic Press, New York, NY, 1971.
98. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, UK, 1982, pp. 20-70.
99. L.M. Cheng, E.B. Hawbolt, and T.R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1907-16.10.1007/s11661-000-0218-8 ↗
100. L.R. Zhao, K. Chen, Q. Yang, J.R. Rodgers, and S.H. Chiou: Surf. Coat. Technol., 2005, vol. 200, pp. 1595-99.10.1016/j.surfcoat.2005.08.097 ↗