Processing and Characterization of Cu-Al-Ni Shape Memory Alloy Strips Prepared from Elemental Powders via a Novel Powder Metallurgy Route
Source abstract
Abstract
In the present work, Cu-Al-Ni shape memory alloy strips were prepared successfully from premixed elemental Cu, Al, and Ni powders in the ratio 82:14:4 (wt pct) by a novel processing route consisting of preparing powder preforms, sintering, and unsheathed hot rolling of the sintered preforms. Subsequently, the hot rolled strips were homogenized. The as-rolled strips consisted of two phases—α and β′. A postconsolidation homogenization of the hot rolled strips was carried out at 1173 K (900 °C) for different time periods. It has been shown that a homogenization period of 4 hours was sufficient to achieve a single-phase material consisting of only martensitic phase. It also has been shown that the 4-hour homogenized and quenched Cu-Al-Ni shape memory alloy strips primarily consisted of self-accommodated β′ martensite plates, which are necessary for realizing shape memory effect (SME). The finished hot rolled Cu-Al-Ni strips had a fracture strength of 476 MPa, coupled with 2.5 pct elongation. The shape memory tests showed almost 100 pct recovery after 10 thermomechanical cycles in the hot rolled strips at 1 pct and 2 pct prestrain level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. J.V. Humbeeck and S. Kustove: Smart Mater. Struct., 2005, vol. 14, pp. 5171-85.10.1088/0964-1726/14/5/001 ↗
2. J.V. Humbeeck: J. Alloys Comp., 2003, vol. 355, pp. 58-64.10.1016/S0925-8388(03)00268-8 ↗
3. Z.C. Lin, W. Yu, R.H. Zee, and B.A. Chin: Intermetallics, 2000, vol. 8, pp. 605-11.10.1016/S0966-9795(99)00133-8 ↗
4. J. Font, E. Cesari, J. Muntasell, and J. Pons: Mater. Sci. Eng., A, 2003, vol. 354, pp. 207-11.10.1016/S0921-5093(03)00003-0 ↗
5. L. Delaey: Phase Transformation in Materials, Ed. P. Haasen, VCH, Weinheim, Germany, 1991, pp. 399-400.
6. T. Tadaki: Shape Memory Materials, Eds. K. Otsuka and C.M. Wauman, Cambridge University Press, Cambridge, UK, 1998, pp. 97-116.
7. S. Miyazaki, K. Otsuka, H. Sakamoto, and K. Shimizu: JIM, 1981, vol. 22, pp. 244-52.10.2320/matertrans1960.22.244 ↗
8. S.W. Husain and P.C. Clapp: J. Mater. Sci., 1987, vol. 22, pp. 2351-56.10.1007/BF01082115 ↗
9. G.N. Sure and L.C. Brown: Metall. Trans. A, 1984, vol. 15A, pp. 1613-21.10.1007/BF02657801 ↗
10. J.S. Lee and C.M. Wayman: JIM, 1986, vol. 27, pp. 584-91.10.2320/matertrans1960.27.584 ↗
11. M.A. Morris: Acta Metall. Mater., 1992, vol. 40, pp. 1573-86.10.1016/0956-7151(92)90100-S ↗
12. Y. Gao, M. Zhu, and J.K.L. Lai: J. Mater. Sci., 1998, vol. 33, pp. 3579-84.10.1023/A:1004647127294 ↗
13. Z. Xiao, Z. Li, M. Fan, M. Luo, S. Gong, and N. Tang: Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 1422-27.10.1016/S1003-6326(07)60288-X ↗
14. S.M. Tang, C.Y. Chung, and W.G. Liu: J. Mater. Process Tech., 1997, vol. 63, pp. 307-12.10.1016/S0924-0136(96)02641-6 ↗
15. Z. Li, Z.Y. Pan, N. Tang, Y.B. Ziang, N. Liu, M. Fang, and M. Zheng: Mater. Sci. Eng., A, 2006, vol. 417, pp. 225-29.10.1016/j.msea.2005.10.051 ↗
16. Z. Xiao, Z. Li, M. Fang, S. Xiong, X. Sheng, and M. Zhou: Mater. Sci. Eng., A, 2008, vol. 488, pp. 266-72.10.1016/j.msea.2007.11.037 ↗
17. H. Sakamoto, Y. Kijima, and K. Shimizu: JIM, 1982, vol. 23, pp. 585-94.10.2320/matertrans1960.23.585 ↗
18. P. Rodriguez and G. Guenin: Mater. Sci. Eng., A, 1990, vol. 129, pp. 273-77.10.1016/0921-5093(90)90274-7 ↗