journal article·2009-04

Minimum Amount of Binder Removal Required during Solvent Debinding of Powder-Injection-Molded Compacts

Yang-Liang Fan, Kuen-Shyang Hwang, Shiau-Han Wu, Yau-Ching Liau

Publisher page

Abstract

Unsatisfactory dimensional control, distortion, and defects are frequently observed in powder-injection-molded parts, particularly after the solvent and thermal-debinding processing steps. One of the reasons is that the amount of soluble binder removed during the first step, solvent debinding, is not great enough to form interconnected pores throughout the compact, particularly in the core region. Thus, blistering, cracking, and bubbles can form easily during the subsequent thermal debinding. To determine the minimum debinding fraction required for solvent debinding, at which point interconnected pore channels are formed at the center, modeling of the distribution of the remaining soluble binder in the compact was established. The actual distribution, which was obtained by measuring the binder content layer by layer with the soxhelt extraction method, is in good agreement with the model. The modeling, bubble test, and fluorescence dye-penetration analysis show that, regardless of the compact thickness, the minimum bulk debinding fraction needed is consistently approximately 59 pct, yielding a local debinding fraction of 37 pct and a porosity of 8.5 pct at the center. This porosity is close to the value at which pores in a sintered compact transform from open to closed at the beginning of the final stage of sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Injection Molding Process and Properties · Advanced machining processes and optimization · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. R.M. German, and A. Bose: Injection Molding of Metals and Ceramics, Metal Powder Industries Federation, Princeton, NJ, 1997, pp. 11–13
2. R.M. German: Int. J. Powder Metall., 1987, vol. 23, pp. 237–45
3. C.E. Finn: Int. J. Powder Metall., 1991, vol. 27, pp. 127–32
4. M. Bloemacher, and D. Weinand: J. Mater. Process. Technol., 1997, vol. 63, pp. 918–2210.1016/S0924-0136(96)00014-3 ↗
5. K S. Hwang, and Y.M. Hsieh: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 245–5310.1007/BF02648403 ↗
6. M.J. Cima, J.A. Lewis, and D. Devoe: J. Am. Ceram. Soc., 1989, vol. 72, pp. 1192–9910.1111/j.1151-2916.1989.tb09707.x ↗
7. H.-H. Angermann, and O. Van Der Biest: Int. J. Powder. Metall., 1993, vol. 29, pp. 239–50
8. K.S. Hwang, and T.H. Tsou: Metall. Trans. A, 1992, vol. 23A, pp. 2775–8210.1007/BF02651756 ↗
9. E.J. Westcot, C. Binet, and R.M. German: Powder Metall., 2003, vol. 46, pp. 61–6710.1179/003258903225010442 ↗
10. S.T. Lin, and R.M. German: Powder Metall. Int., 1989, vol. 21, pp. 19–24
11. D.S. Tsai, and W.W. Chen: Ceram. Int., 1995, vol. 21, pp. 257–6410.1016/0272-8842(95)99791-9 ↗
12. B. Zhu, X. Qu, and Y. Tao: Mater. Process. Technol., 2003, vol. 142, pp. 487–9210.1016/S0924-0136(03)00648-4 ↗
13. T.S. Shivashankar, and R.M. German: J. Am. Ceram. Soc., 1999, vol. 85, pp. 1146–5210.1111/j.1151-2916.1999.tb01888.x ↗
14. M.R. Barone, and J.C. Ulicny: J. Am. Ceram. Soc., 1990, vol. 73, pp. 3323–3310.1111/j.1151-2916.1990.tb06456.x ↗
15. Y. Li, F. Jiang, L. Zhao, and B. Huang: Mater. Sci. Eng., A, 2003, vol. 362, pp. 292–9910.1016/S0921-5093(03)00613-0 ↗
16. ASTM Standards B328-96, Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings, ASTM International, West Conshohocken, PA, 2003
17. ASTM Standards E128-99, Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use, ASTM International, West Conshohocken, PA, 2005
18. J. Crank: The Mathematics of Diffusion, 2nd ed., Clarendon Press, Oxford, UK, 1975, pp. 47–48
19. R.M. German: Sintering Theory and Practice, John Wiley & Sons, Inc., New York, NY, 1996, pp. 155–56