Influence of alloying elements on the kinetics of massive transformation in gamma titanium aluminides
Source abstract
Abstract
The effect of alloying elements, Nb and Mn on massive transformation in Ti-45 Al based alloys was studied. The alloy samples were heat treated at 1350 °C for 30 minutes and subsequently cooled to room temperature by furnace cooling, air cooling, and water quenching. The microstructural evolution in various alloys was investigated by a detailed microstructural characterization of the heat-treated samples by optical, scanning, and transmission electron microscopy. It was observed that the volume fraction of the massively transformed gamma in water-quenched samples increased from nil in the Mn-free alloy to ∼70 pct in the alloy containing 2 at. pct Mn. Nb had a minimal effect on the extent of transformation. The effects of Nb and Mn have been rationalized on the basis of the site occupancy of the alloying elements and their possible influence on the phase boundaries and grain size. An attempt has also been made to elucidate the mechanism of massive transformation in these alloys. Based on the results obtained, the influence of Mn and Nb on the kinetics of massive transformation is presented and discussed and, the CCT diagrams for different alloys used in this study are proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Y.W. Kim: JOM, 1994, vol. 46 (7), pp. 30–39.10.1007/BF03220745 ↗
2. Y.W. Kim and D.M. Dimiduk: in Structural Intermetallics, M.V. Nathal et al. eds., TMS, Warrendale, PA, 1997, pp. 531–43.
3. Y.W. Kim: Intermetallics, 1998, vol. 6 (7–8), pp. 623–28.10.1016/S0966-9795(98)00037-5 ↗
4. C.M. Austin, T.J. Kelly, K.G. McAllister, and J.C. Chesnutt: in Structural Intermetallics, M.V. Nathal et al., eds., TMS, Warrendale, PA, 1997, pp. 413–25.
5. S.C. Huang and J.C. Chesnutt: in Intermetallic Compounds, Practice, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons Ltd., New York, NY, 1994, vol. 2, pp. 73–90.
6. P. Wang, G.B. Viswanathan, and V.K. Vasudevan: Metall. Trans. A, 1992, vol. 23A, pp. 690–97.10.1007/BF02801187 ↗
7. P. Wang and V.K. Vasudevan: Scripta Metall. Mater., 1992, vol. 27, pp. 89–94.10.1016/0956-716X(92)90325-9 ↗
8. A. Denquin and S. Naka: Acta Mater., 1996, vol. 4 (1), pp. 353–65.10.1016/1359-6454(95)00168-6 ↗
9. E. Abe, T. Kumagai, and M. Nakamura: in Structural Intermetallics, M.V. Nathal et al., eds., TMS, Warrendale, PA, 1997, pp. 167–75.
10. M.C. Chaturvedi, N.L. Richards, and Q. Xu: Mater. Sci. Eng. A, 1997, vols. A239–A240, pp. 605–12.10.1016/S0921-5093(97)00637-0 ↗
11. Q. Xu, M.C. Chaturvedi, and N.L. Richards: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1717–26.10.1007/s11661-999-0171-0 ↗
12. X.D. Zhang, T.A. Dean, and M.H. Loretto: Acta Mater., 1994, vol. 42 (6), pp. 2035–42.10.1016/0956-7151(94)90028-0 ↗
13. D. Veeraraghavan and V.K. Vasudevan: in Gamma Titanium Aluminides, Y.W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 157–64.
14. Y. Yamabe, M. Takeyama, and M. Kikuchi: in Gamma Titanium Aluminides, Y.W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 111–29.
15. D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgill, M.J. Kaufman, and M.H. Loretto: Acta Mater., 1996, vol. 44 (9), pp. 3723–34.10.1016/1359-6454(95)00453-X ↗
16. T. Kumagai, E. Abe, M. Takeyama, and M. Nakamura: Scripta Metall. Mater., 1997, vol. 36 (5), pp. 523–29.10.1016/S1359-6462(96)00416-2 ↗
17. P. Wang, M. Kumar, D. Veeraraghavan, and V.K. Vasudevan: Acta Mater., 1998, vol. 46 (1), pp. 13–30.10.1016/S1359-6454(97)00237-1 ↗
18. D. Veeraraghavan, P. Wang, and V.K. Vasudevan: Acta Mater., 1999, vol. 47 (11), pp. 3313–30.10.1016/S1359-6454(99)00195-0 ↗
19. U. Prasad, Q. Xu, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2002, vols. A329-A331, pp. 906–13.10.1016/S0921-5093(01)01574-X ↗
20. U. Prasad, Q. Xu, and M.C. Chaturvedi: in Structural Intermetallics, K.J. Hemker et al., eds., TMS, Warrendale, PA, 2001, pp. 615–22.
21. G. Petzow and G. Effenberg, eds., A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram, vol. 7 VCH Verlagsgesellschaft, Weinheim, Germany.
22. D.G. Konitzer, I.P. Jones, and H.L. Fraser: Scripta Metall., 1986, vol. 20 (2), pp. 265–68.10.1016/0036-9748(86)90139-0 ↗
23. E. Mohandas and P.A. Beaven: Scripta Metall., 1991, vol. 25, pp. 2023–27.10.1016/0956-716X(91)90268-6 ↗
24. Y.L. Hao, D.S. Xu, Y.Y. Cui, R. Yang, and D. Li: Acta Mater., 1999, vol. 47 (4), pp. 1129–39.10.1016/S1359-6454(99)00006-3 ↗
25. Y.L. Hao, R. Yang, Y.Y. Cui and D. Li: Acta Mater., 2000, vol. 48, pp. 1313–24.10.1016/S1359-6454(99)00415-2 ↗
26. C. Woodward, S.A. Kajihara, S.I. Rao, and D.M. Dimiduk: in Gamma Titanium Aluminides, Y.W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 49–58.
27. S.A. Jones and M.J. Kaufman: Acta Metall., 1993, vol. 41 (2), pp. 387–98.10.1016/0956-7151(93)90069-5 ↗
28. W.J. Zhang, G.L. Chen, and E. Evangelista: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2591–98.10.1007/s11661-999-0298-z ↗
29. M. Morinaga, J. Saito, N. Yukawa, and H. Adachi: Acta Metall., 1990, vol. 38 (1), pp. 25–29.10.1016/0956-7151(90)90131-Y ↗
30. S.G. Pyo and N.J. Kim: in Gamma Titanium Aluminides, Y.W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 779–86.
31. J.E. Wittig: Metall. Mater. Trans. A, 2002, vol. 30A, pp. 2373–79.10.1007/s11661-002-0360-6 ↗
32. J.H. Perepezko: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 437–47.10.1007/BF02644967 ↗
33. T.B. Massalski: Metall. Trans. A, 1984, vol. 15A, pp. 421–25.10.1007/BF02644965 ↗
34. J.G. Lin, C.E. Wen, Y.G. Zhang, and C.Q. Chen: J. Mater. Sci. Lett., 1999, vol. 18, pp. 927–29.10.1023/A:1006605628150 ↗
35. J.F. Nie, B.C. Muddle, T. Furuhara, and H.I. Aaronson: Scripta Metall. Mater., 1998, vol. 39 (4–5), pp. 637–45.10.1016/S1359-6462(98)00208-5 ↗