journal article·2007-12

Effect of Strain-Path Reversal on Microstructure Evolution and Cavitation during Hot Torsion Testing of Ti-6Al-4V

P.D. Nicolaou, S.L. Semiatin

Publisher page

Abstract

Hot torsion testing comprising multiple twist reversals was used to establish the effect of strain-path changes on concurrent dynamic globularization and cavitation of Ti-6Al-4V with a colony-alpha starting microstructure. Optical microscopy was used to quantify the cavity area fraction and the effect of globularization on cavitation. The deformation of the hard and soft colonies surrounding the largest cavities and self-consistent-model calculations of strain partitioning were used to estimate the macroscopic and local strains at which colonies with different strengths globularize. It was found that both hard and soft colonies undergo dynamic globularization at the same local strain (i.e., strain within the colony). In addition, cavitation behavior during torsion with multiple strain-path changes was interpreted by taking into account the break up of the colonies into a globular structure. It was found that cavity growth (or shrinkage) persisted as long as there was a flow-stress difference in adjacent regions/colonies surrounding a given cavity. When the microstructure became uniform (as in the case of full globularization), the cavity area fraction did not measurably change with subsequent additional deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S.L. Semiatin, V. Seetharaman, I. Weiss: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon, S.L. Semiatin, eds., TMS, Warrendale, PA , 1997, pp. 3–73
2. S.L. Semiatin, V. Seetharaman, I. Weiss: Mater. Sci. Eng., A, 1999, vol. A263, pp. 257–7110.1016/S0921-5093(98)01156-3 ↗
3. S.L. Semiatin, R.L. Goetz, E.B. Shell, V. Seetharaman, A.K. Ghosh: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1411–2410.1007/s11661-999-0289-0 ↗
4. J.C. Williams, E.A. Starke Jr.: Deformation, Processing, and Structure, ASM, Metals Park, OH, 1982, ch. 7
5. M.J. Stowell: in Superplastic Forming of Structural Alloys, N.E. Paton, C.H. Hamilton, eds., TMS-AIME, Warrendale, PA, 1982, pp. 321–26
6. C.C. Bampton, J.W. Edington: J. Eng. Mater. Technol., 1983, vol. 105, pp. 55–6010.1115/1.3225619 ↗
7. R. Verma, P.A. Friedman, A.K. Ghosh, S. Kim, C. Kim: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1889–9810.1007/BF02651938 ↗
8. P.D. Nicolaou, S.L. Semiatin, A.K. Ghosh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2187–9010.1007/s11661-004-0170-0 ↗
9. D.H. Bae, A.K. Ghosh, J.R. Bradley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2449–6310.1007/s11661-003-0005-4 ↗
10. P.D. Nicolaou, J.D. Miller, S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3461–6910.1007/s11661-005-0019-1 ↗
11. P.D. Nicolaou, S.L. Semiatin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3697–370510.1007/s11661-006-1063-1 ↗
12. T.R. Bieler, P.D. Nicolaou, S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 129–4010.1007/s11661-005-0145-9 ↗
13. P.D. Nicolaou, S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1567–7410.1007/s11661-005-0248-3 ↗
14. T.R. Bieler, R.L. Goetz, S.L. Semiatin: Mater. Sci. Eng. A, 2005, vol. A405, pp. 201–1310.1016/j.msea.2005.05.064 ↗
15. R.M. Poths, G. Angella, B.P. Wynne, W.M. Rainforth, S.L. Semiatin, J.H. Beynon: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2993–300110.1007/s11661-004-0246-x ↗
16. R.M. Poths, B.P. Wynne, W.M. Rainforth, S.L. Semiatin, J.H. Beynon: in Ti-2003: Science and Technology, G. Luetjering, J. Albrecht, eds., Wiley-VCH Verlag GmbH, Weinheim, Germany, 2004, pp. 1243–50
17. G. Angella, B.P. Wynne, J.H. Beynon, and W.M. Rainforth: THERMEC’2000, T. Chandra, K. Higashi, C. Suryanarayana, and C. Tome, eds., Elsevier Science, New York, NY, 2000, published on CD
18. S.L. Semiatin, T.R. Bieler: Acta Mater., 2001, vol. 49, pp. 3565–7310.1016/S1359-6454(01)00236-1 ↗
19. I. Weiss, S.L. Semiatin: Mater. Sci. Eng., A, 1998, vol. A243, pp. 46–6510.1016/S0921-5093(97)00783-1 ↗
20. C.I. Weiss, S.L. Semiatin: Mater. Sci. Eng., A, 1999, vol. A263, pp. 243–5610.1016/S0921-5093(98)01155-1 ↗
21. S.L. Semiatin, F. Montheillet, G. Shen, J.J. Jonas: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2719–2710.1007/s11661-002-0394-9 ↗
22. I. Weiss, G.E. Welsch, F.H. Froes, and D. Eylon: Titanium: Science and Technology, G. Luetjering, U. Zwicker, and W. Bunk, eds., Deutsche Gesellschaft fr Metallkunde e.V., Oberursel, Germany, 1985, pp. 1503–10
23. T.R. Bieler, S.L. Semiatin: Int. J. Plast., 2002, vol. 18, pp. 1165–8910.1016/S0749-6419(01)00057-2 ↗
24. Y.-M. Liu, H.N.G. Wadley, J.M. Duva: Acta Metall. Mater., 1994, vol. 42, pp. 2247–6010.1016/0956-7151(94)90303-4 ↗
25. D.P. DeLo, R.E. Dutton, S.L. Semiatin, H.R. Piehler: Acta Mater., 1999, vol. 47, pp. 3159–6710.1016/S1359-6454(99)00196-2 ↗
26. S. Shamasundar, R.E. Dutton, S.L. Semiatin: Scripta Metall. Mater., 1994, vol. 31, pp. 521–2510.1016/0956-716X(94)90137-6 ↗