A New Tensile Test for Aluminum Alloys in the Mushy State: Experimental Method and Numerical Modeling
Source abstract
Abstract
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidification. The experimental approach involves both tensile-strength measurements and scanning electron microscope (SEM) observations of fracture surfaces. Complementary information can be obtained by numerical modeling of this solidification process. The latter takes into account heat flow in the sample, rheology of the mushy alloy, liquid feeding, and porosity formation. All of the available information indicates that the transition from a granular mushy alloy to a coalesced solid-skeleton behavior starts for a solid fraction of approximately 92 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. D.G. Eskin, Suyitno, and L. Katgerman.: Progr. Mater. Sci., 2004, vol. 49, pp. 629–71110.1016/S0079-6425(03)00037-9 ↗
2. U. Feurer: Giessereiforschung, 1976, vol. 28, pp. 750–80
3. T.W. Clyne, G.J. Davies: J. Br. Foundry, 1981, vol. 74, pp. 65–73
4. M. Rappaz, J.-M. Drezet, M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A pp. 449–5510.1007/s11661-999-0334-z ↗
5. M. Rappaz, A. Jacot, W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467–7910.1007/s11661-003-0083-3 ↗
6. V. Mathier, M. Rappaz, A. Jacot: Modell. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 479–9010.1088/0965-0393/12/3/009 ↗
7. S. Vernède, M. Rappaz: Philos. Mag., 2006, vol. 86, pp. 3779–9410.1080/14786430500228705 ↗
8. T.W. Clyne, G.J. Davies: J. Br. Foundry, 1975, vol. 68, pp. 238–44
9. J.A. Spittle, A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6–1310.1179/030716983803291226 ↗
10. D. Warrington, D.G. McCartney: Cast Met., 1989, vol. 2, pp. 134–4310.1080/09534962.1989.11818994 ↗
11. P. Ackermann, W. Kurz, W. Heinemann: Mater. Sci. Eng., 1985, vol. 75, pp. 79–8610.1016/0025-5416(85)90179-X ↗
12. I. Farup, J.-M. Drezet, M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–6910.1016/S1359-6454(01)00013-1 ↗
13. S. Vernède, P. Jarry, M. Rappaz: Acta Mater., 2006, vol. 54, pp. 4023–3410.1016/j.actamat.2006.04.035 ↗
14. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, pp. 217–22 and pp. 1209–1410.4028/www.scientific.net/MSF.217-222.1209 ↗
15. Y. Ju, L. Arnberg: Int. J. Cast Met. Res., 2003, vol. 16, pp. 522–3010.1080/13640461.2003.11819630 ↗
16. O. Ludwig, J.-M. Drezet, C.L. Martin, M. Suéry: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1525–3510.1007/s11661-005-0244-7 ↗
17. V. Mathier, J.-M. Drezet, M. Rappaz: Modell. Simul. Mater. Sci. Eng., 2007, vol. 15, pp. 121–3410.1088/0965-0393/15/2/008 ↗
18. V. Mathier: Ph.D. Dissertation, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2007
19. M. M’Hamdi, A. Mo, H.G. Fjaer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3069–8310.1007/s11661-006-0188-6 ↗
20. V. Mathier, J.-M. Drezet, and M. Rappaz: MCWASP XI, 2006
21. O. Ludwig, J.-M. Drezet, P. Ménès, C.L. Martin, M. Suéry: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 174–7910.1016/j.msea.2005.09.087 ↗
22. W.M. Van Haaften, B. Magnin, W.H. Kool, L. Katgerman: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1971–8010.1007/s11661-002-0030-8 ↗
23. C. Pequet, M. Gremaud, M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–210610.1007/s11661-002-0041-5 ↗
24. P.-D. Grasso: Ph.D. Dissertation, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2004