Sodium Borohydride Reduction of Aqueous Silver-Iron-Nickel Solutions: a Chemical Route to Synthesis of Low Thermal Expansion–High Conductivity Ag-Invar Alloys
Source abstract
Abstract
Thermal management is a critical concern in the design and performance of electronics systems. If heat extraction and thermal expansion are not properly addressed, the thermal mismatch among dissimilar materials may give rise to high thermal stresses or interfacial shear strains, and ultimately to premature system failure. In this article, we present a chemical synthesis process that yields Ag-Invar (64Fe-36Ni) alloys with a range of attractive properties for thermal management applications. Sodium borohydride reduction of an aqueous Ag-Fe-Ni metal salt solution produces nanocrystalline powders, and conventional powder processing converts this powder to fine-grained alloys. The samples are characterized by X-ray diffraction (XRD), scanning electron microscopy, thermomechanical analysis, and electrical conductivity measurements; thermal conductivity is estimated using the Wiedemann–Franz law. Sintering of Ag-Fe-Ni powders leads to the formation of two-phase silver-Invar alloys with low coefficients of thermal expansion (CTEs) and relatively high electrical conductivities. A sample of 50Ag-50Invar exhibits a CTE of 8.76 μ m/(m· °C) and an estimated thermal conductivity of 236 W/(m·K). The Ag-Invar alloys offer thermodynamic stability and tailorable properties, and they may help address the need for improved packaging materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. F.J. Dance and J.L. Wallace: Circuit World, 1982, vol. 9, pp. 4–7.10.1108/eb043673 ↗
2. H. Baudry and G. Kersuzan: 5th Euro. Hybrid Microelectronics Conf. Proc., 1985, pp. 454–64.
3. W.R. Johannes and W. Johnson: Int. J. Microcircuits Elec. Pkg., 1994, vol. 17, pp. 135–42.
4. D.S. Copeland, M.K. Rahim, J.C. Suhling, G. Tian, P. Lall, and R.C. Jaeger: Proc. 2005 ASME Int. Mech. Engr. Congress Expo., 2005, pp. 185–98.
5. R.A. Koch, R. Watts, T. Benson-Tolle, and K. Strong: Proc. 48th Int. SAMPE Symp., 2003, pp. 84-89.
6. V. Sundaram, R. Tummala, B. Wiedenman, F. Liu, P.M. Raj, I.R. Abothu, S. Bhattacharya, M. Varadarajan, E. Bongio, and W. Sherwood: Proc. 56th Elec. Comp. Tech. Conf., 2006, pp. 1357–80.
7. C. Zweben: J. Adv. Mater., 2007, vol. 39 (1), pp. 3–10.
8. A. Luedtke: Adv. Eng. Mater., 2004, vol. 6 (3), pp. 142–44.10.1002/adem.200300552 ↗
9. F. Spexarth: J. Cronin, and W. Johnson: Int. J. Microcircuits Elec. Pkg., 1995, vol. 18 (2), pp. 138–45.
10. F. Spexarth, J. Cronin, and W. Johnson: Adv. Pkg., 1995, Mar.–Apr., pp. 36–38.
11. P. Yih and D.D.L. Chung: J. Mater. Sci., 1997, vol. 32 (11), pp. 2873–82.10.1023/A:1018624517297 ↗
12. S. Jha: Proc. 45th Elec. Component Technol. Conf., 1995, pp. 542–47.
13. D.E. Jech and J.L. Sepulveda: Int. Symp. Microelectron., SPIE Proc. 3235, 1997, pp. 90–96.
14. J. Stolk and A. Manthiram: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2396–98.10.1007/s11661-000-0159-2 ↗
15. R.M. Bozorth: Ferromagnetism, Van Nostrand, Princeton, NJ, 1978, p. 641.
16. D.F. Berry: ASM Handbooks Online, ASM INTERNATIONAL, Materials Park, OH, 2002, vol. 2.
17. E.L. Frantz: ASM Handbooks Online, ASM INTERNATIONAL, Materials Park, OH, 2002, vol. 2.
18. W. Johnson and S. Nelson: Proc. IEPS Conf., 1995, pp. 228–35.
19. J. Stolk, M. Gross, D. Stolk, and A. Manthiram: J. Mater. Res., 2001, vol. 16 (2), pp. 340–43.10.1557/JMR.2001.0053 ↗
20. L.J. van der Pauw: Philips Technol. Rev., 1958, vol. 20, pp. 220–24.
21. F.J. Blatt: Physics of Electronic Conduction in Solids, McGraw-Hill Book Company, New York, NY, 1968.
22. A.A. Fahmy and A.N. Ragai: J. Appl. Phys., 1970, vol. 41, pp. 5108–11.10.1063/1.1658619 ↗
23. ASM Handbooks Online, ASM INTERNATIONAL, Materials Park, OH, 2002, vol. 3.
24. ASTM B 742-90(2006), ASTM, Philadelphia, PA, 2006.
25. ASTM F 1684-06, ASTM, Philadelphia, PA, 2006.
26. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, Warrendale, PA, 1998, pp. 208–11.