The Nature and Origin of “Double Expanded Austenite” in Ni-Based Ni-Ti Alloys Developing Upon Low Temperature Gaseous Nitriding
Source abstract
Abstract
Gaseous nitriding of Ni-4 wt pct Ti alloy plates led to the development of double expanded austenite (cN1 and cN2) at the surface of the nitride plates. Grazing-incidence X-ray diffraction analysis demonstrated that the component cN1 is located close to the surface and the component cN2 is located at a certain depth below the specimen surface, in correspondence with a layered character of the nitrided zone beneath the surface as revealed by optical microscopy. Electron probe microanalysis, atom probe tomography, and Laue microdiffraction analysis did not reveal a significant difference in nitrogen content of the cN1 and cN2 sublayers. By X-raydiffraction stress analysis it was shown that the only significant differences of the two expanded austenite layers is a pronounced difference in compressive stress parallel to the surface: the cN1 layer is subjected to a huge compressive stress, as large as a few GPa, whereas a relatively modest stress prevails in the cN2 layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. E.J. Mittemeijer: in ASM Handbook, J.I. Dosset and G.E. Totten, eds., 2013, vol. 4A, pp. 619–46.10.31399/asm.hb.v04a.a0005818 ↗
2. H. Dong: Int. Mater. Rev., 2010, vol. 55, pp. 65-98.10.1179/095066009X12572530170589 ↗
3. D. L. Williamson, O. Ozturk, R.Wei, P.J. Wilbur: Surf. Coat. Technol., 1994, vol. 65, pp. 15-23.10.1016/S0257-8972(94)80003-0 ↗
4. T.L. Christiansen, T.S. Hummelshoj, M.A.J. Somers: Surf. Eng., 2010, vol. 26, pp. 242-247.10.1179/026708410X12506870724316 ↗
5. K. Ichii, K. Fujimura, T. Takase: Technol. Rep. Kansai Univ., 1986, vol. 27, pp. 135-144.
6. A.A. Kodentsov, J.H. Gulpen, C. Cserhati, J.K. Kivilahti, F.J.J van Loo: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 59-69.10.1007/BF02647747 ↗
7. A.A. Kodentsov, M.J.H. van Dal, C. Cserhati, L. Daroczi, F.J.J van Loo: Acta mater., 1999, vol. 47, pp. 3169-180.10.1016/S1359-6454(99)00194-9 ↗
8. R. P. Rubby, D. L. Douglass: Oxid. Met., 1991, vol. 35, pp. 259-277.10.1007/BF00738289 ↗
9. S. Corujeira Gallo, H. Dong: Scripta Mater., 2012, vol. 67, pp. 89-91.10.1016/j.scriptamat.2012.03.028 ↗
10. M. Asgari, A. Barnoush, R. Johnsen, R. Hoel: Mater. Sci. Eng. A, 2011, vol. 529, pp. 425-434.10.1016/j.msea.2011.09.055 ↗
11. T. Makishi, K. Nakata: Metall. Mater. Trans. A, 2007, vol. 35, pp. 224-37.
12. C. Sudha, R. Anand, V. Thomas Paul, S. Saroja, M. Vijayalakshmi: Surf. Coat. Technol., 2013, vol. 226, pp. 92-99.10.1016/j.surfcoat.2013.03.040 ↗
13. F. Pedraza, C. Savall, G. Abrasonis, J. P. Riviere, J.F. Dinhut, J. L. Grosseau-Poussard: Thin Solid Films, 2007, vol. 515, pp. 3661-3669.10.1016/j.tsf.2006.10.081 ↗
14. K. M. Eliasen, T.L. Christiansen, M.A.J. Somers: Surf. Eng., 2010, vol. 26, pp. 248-55.10.1179/026708409X12490360426043 ↗
15. D. L. Williamson, J. A. Davis, P. J. Wilibur: Surf. Coat. Technol., 1998, vol. 103-104, pp. 178-184.10.1016/S0257-8972(98)00389-2 ↗
16. J. Baranowska, E. Kusior, V. Amigo, K. Szczenciński: Vacum, 2005, vol. 78, pp. 389-394.10.1016/j.vacuum.2005.01.055 ↗
17. C. Leroy, T. Czerwic, C. Gabet, T. Belmonte, H. Michel: Surf. Coat. Technol., 2001, vol. 142-144, pp. 241-247.10.1016/S0257-8972(01)01243-9 ↗
18. A. Leineweber, T. Gressmann, E.J. Mittemeijer: Surf. Coat. Tech., 2011, vol. 206, pp. 2780-791.10.1016/j.surfcoat.2011.11.035 ↗
19. E.J. Mittemeijer, M.A.J. Somers: Surf. Eng., 1997, vol. 13, pp. 483-97.10.1179/sur.1997.13.6.483 ↗
20. E. Lehrer: Z. Elektrochem., 1930, vol. 36, pp. 383-92.
21. M. Fonović, A. Leineweber, E.J. Mittemeijer: Surf. Eng., 2014, vol. 30, pp. 16-20.10.1179/1743294413Y.0000000173 ↗
22. M. Fonović, A. Leineweber, E.J. Mittemeijer: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4863-4874.10.1007/s11661-014-2440-9 ↗
23. A. Leineweber, F. Lienert, S.L. Shang, Z.K. Liu, E.J. Mittemeijer: J. Mater. Res., 2012, vol. 27, pp. 1531-541.10.1557/jmr.2012.40 ↗
24. W.L. Mankins: in ASM Handbook, G.F. Van der Voort, ed., 2004, vol. 9, pp. 816–19.10.31399/asm.hb.v09.a0003775 ↗
25. M.M. Khrushchov, E.S. Berkovich, Ind. Diamond Rev., 1951, vol. 11, pp: 42-49.
26. W.C. Oliver, G.M. Pharr: J. Mater. Res. 1992, vol.7, pp: 1564-1583.10.1557/JMR.1992.1564 ↗
27. A. Armigliato, L. Dori, A. Garuli, P. Venturi: J. Microsc. Spectrosc. Electron., 1982, vol. 7, pp. 593-603.
28. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olsen, T.F. Kelly, B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131-139.10.1016/j.ultramic.2006.06.008 ↗
29. J. R. de Laeter, J. K. Böhlke, P. De Bièvre, H. Hidaka, H. S. Peiser, K. J. R. Rosman and P. D. P. Taylor: Pure Appl. Chem., 2003, vol. 75, pp. 683-800.10.1351/pac200375060683 ↗
30. U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen E. J. Mittemeijer: J. Appl. Crystallogr., 2005, vol. 38, pp. 1-29.10.1107/S0021889804029516 ↗
31. A.A. Coelho: TOPAS, Bruker AXS GmbH, Karlsruhe, 2003.
32. O. Ulrich, X. Biquard, P. Bleuet, O. Geaymond, P. Gergaud, J. S. Micha, O. Robach, F. Rieutord: Rev. Sci. Instrum., 2011, vol. 82, pp. 033908.10.1063/1.3555068 ↗
33. O. Robach, J. S. Micha, O. Ulrich, O. Geaymond, O. Sicardy, J. Härtwig, F. Rieutord: Acta Cryst. A., 2013, vol. 69, pp. 164-170.10.1107/S0108767313000172 ↗
34. B. Gault, M.P. Moody, J.M. Cairney, and S.P. Ringer: Atom Probe Microscopy, vol. 160, Springer, New York, 2012.10.1007/978-1-4614-3436-8 ↗
35. A. Krawitz, R. Sinclair: Philos. Mag., 1975, vol. 31, pp. 697-712.10.1080/14786437508226548 ↗
36. O. Sakata, M. Nakamura: Springer Series in Surface Sciences, 2013, vol. 51, pp. 165-190.10.1007/978-3-642-34243-1_6 ↗
37. T. Christiansen, M.A.J. Somers: Mater. Sci. Forum, 2004, vol. 443-444, pp. 91-94.10.4028/www.scientific.net/MSF.443-444.91 ↗
38. T. Christiansen, M.A.J. Somers: Mater. Sci. Eng. A, 2006, vol. 424, pp. 181-189.10.1016/j.msea.2006.03.007 ↗
39. C.J. Smithells and E.A. Brandes: Metal Reference Book, 5th ed., Butterworths, London, 1976, pp. 975–980.
40. R. Hill: P. Phys. Soc. Lond. A, 1965, vol. 65, pp. 349-354.10.1088/0370-1298/65/5/307 ↗
41. J.C. Stinville, J. Cormier, C. Templier, P. Villechaise: Acta Mater., 2015, vol. 83, pp. 10-16.10.1016/j.actamat.2014.09.052 ↗
42. S. Parascandola, W. Moller, D. Williamson: Appl. Phys. Lett., 2000, vol. 76, pp. 2194-2196.10.1063/1.126294 ↗
43. S. Mandl, R. Rauschenbach: J. Appl. Phys, 2000, vol. 88, pp. 3323-3329.10.1063/1.1289520 ↗
44. A. Martinavičius, R. Danoix, M. Drouet, C. Templier, B. Hannoyer, F. Danoix: Mater. Lett., (2015), vol. 139, pp. 153-156.10.1016/j.matlet.2014.09.093 ↗
45. X. Gu, G.M. Michal, F. Ernst, H. Khan, and A.H. Heuer: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4268. 10.1007/s11661-014-2377-z.10.1007/s11661-014-2377-z ↗
46. O. Öztürk, D. L. Williamson; J. Appl. Phys., 1995, vol. 77, pp. 3839-3850.10.1063/1.358561 ↗
47. A.H. Heuer, F. Ernst, H. Kahn, A. Avishai, G.M. Michal, D.J. Pitchure and R.E. Ricker: Scripta Mater., 2007, vol. 56, pp. 1067-1070.10.1016/j.scriptamat.2007.02.035 ↗
48. U. Welzel, E.J. Mittemeijer: J. App. Phys., 2003, vol. 93, pp. 9001-9011.10.1063/1.1569662 ↗
49. A. Martinavičius, G. Abrasonis, W. Möller: J. Appl. Phys., 2011, vol. 110, pp. 074907.10.1063/1.3646493 ↗
50. H.J.S. Speidel, M.O. Speidel: Mater. Manuf. Process, 2004, vol. 19, pp. 95-109.10.1081/AMP-120027518 ↗
51. T. Gressman, A. Leineweber, E.J. Mittemeijer: Philos. Mag., 2008, vol. 88, pp. 145-169.10.1080/14786430701798936 ↗
52. R.E. Newnham: Properties of Materials, Oxford University Press, Oxford, 2005.