journal article·2002-07

High temperature SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

N. H. Van Dijk, W. G. Bouwman, S. E. Offerman, M. Th Rekveldt, J. Sietsma, S. Van der Zwaag, A. Bodin, R. K. Heenan

Publisher page

Abstract

The volume distribution of precipitates in high-strength low-alloy (HSLA) steels has been studied using small-angle neutron scattering (SANS) at high temperatures. Three samples with different niobium concentrations (0.00, 0.05, and 0.10 wt pct) were slowly heated from a temperature of 910 °C to 1200 °C. With increasing temperatures, the scattered intensity strongly decreases as the precipitates gradually dissolve or coarsen. A comparison between the particle distribution of the three different materials suggests that the particles with a radius below 10 nm mainly correspond to Nb(C,N) precipitates and the larger particles to MnS precipitates. Subsequent cooling from 1200 °C to 910 °C only leads to a small increase in the scattered intensity. Quenching from the austenite to the ferrite phase and reheating to the austenite phase, however, produces a large increase in the formation of the small precipitates with a radius below 10 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. G. Li, T.M. Maccagno, D.Q. Bai, and J.J. Jonas: Iron Steel Inst. Jpn. Int., 1996, vol. 36, p. 1479.10.2355/isijinternational.36.1479 ↗
2. J. Perttula, P. Kantanen, and P. Karjalainen: Scand. J. Metall., 1998, vol. 27, p. 128.
3. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Trans. A, 1983, vol. 14A, p. 1967.10.1007/BF02662364 ↗
4. Heilong Zou and J.S. Kirkaldy: Metall. Trans. A, 1991, vol. 22A, p. 1511.
5. R.C. Cochrane and W.B. Morrison: Proc. Steels for Line Pipe and Pipeline Fittings Conf., Oct. 21–23, 1981, The Metal Society, London, p. 70.
6. S. Akamatsu, T. Senuma, and M. Hasebe: Iron Steel Inst. Jpn., 1992, vol. 32, p. 275.10.2355/isijinternational.32.275 ↗
7. R. Abad, B. López, and I Gutierrez: Mater. Sci. Forum, 1998, vols. 284–286, p. 167.
8. V. Thillou, M. Hua, C.I. Garcia, C. Perdrix, and A.J. DeArdo: Mater. Sci. Forum, 1998, vols. 284–286, p. 311.10.4028/www.scientific.net/MSF.284-286.311 ↗
9. A.D. Sequeira, J.S. Pedersen, and G. Kostorz: in Modern Aspects of Small-Angle Scattering, H. Brumberger, ed., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1995, p. 267.10.1007/978-94-015-8457-9_9 ↗
10. A.J. Allen, D. Gavillet, and J.R. Weertman: Acta Metall. Mater., 1993, vol. 41, p. 1869.10.1016/0956-7151(93)90207-9 ↗
11. R. Coppola, R. Kampmann, M. Magnani, and P. Staron: Acta Mater., 1998, vol. 46, p. 5447.10.1016/S1359-6454(98)00189-X ↗
12. R.K. Heenan, J. Penfold, and S.M. King: J. Appl. Cryst., 1997, vol. 30, p. 1140.10.1107/S0021889897002173 ↗
13. S.M. King: in Modern Techniques for Polymer Characterisation, R.A. Pethrick and J.V. Dawkins, eds., John Wiley & Sons, New York, NY, 1999, p. 171.
14. D.I. Svergun: J. Appl. Cryst., 1992, vol. 25, p. 495.10.1107/S0021889892001663 ↗
15. http://www.embl-hamburg.de/ExternalInfo/Research/Sax/gnom.html.
16. T. Hayashida, S. Sanagi, and T. Kawano: Iron and Steelmaker Magazine, May 1992, Iron and Steel Society, Warrendale, PA.
17. E.T. Turkdogan and J. Pearson: J. Iron Steel Inst., 1955, vol. 177, p. 349; E.T. Turkdogan, S. Ignotowicz, and J. Pearson: J. Iron Steel Inst., 1955, vol. 180, p. 349.
18. R.A. Hubert and C. Standaert: Proc. THERMEC’97 Int. Conf. on Thermo-Mechanical Processing of Steels and Other Materials, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, p. 459.