journal article·2014-09Open access

The Strength of the Spatially Interconnected Eutectic Network in HPDC Mg-La, Mg-Nd, and Mg-La-Nd Alloys

Bao Zhang, Serge Gavras, Anumalasetty V. Nagasekhar, Carlos Horacio Cáceres, Mark A. Easton

Abstract

3D numerical images of the intergranular percolating eutectic of two binary alloys, Mg-0.62 at. pctLa and Mg-0.60 at. pctNd, created using dual beam FIB tomography, were incorporated into an FEM code to model their tensile behavior. Due to its high volume fraction (29.9 pct), the behavior of the Mg-La network was akin to that of a stretch-dominated micro-truss structure, whereas the Mg-Nd's, with a relatively low volume fraction (7.5 pct), mimicked that of a bending-dominated structure. The 3D network contributed some 37 MPa to the strength of the Mg-La alloy casting, whereas it only added about 1.4 MPa to the Mg-Nd's. The model predictions based on the binary alloys were verified using cast-to-shape specimens of the Mg-La and two ternary Mg-La-Nd alloys, subjected to a flash-annealing aiming at breaking up the continuity of the 3D network, while preserving the rest of the microstructure unchanged. The flash-annealed specimens exhibited a decrease in strength that matched closely the computed values. Implications regarding alloy design involving the eutectic network and solid solution hardening of more complex alloys are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. C.H. Cáceres, W.J. Poole, A.L. Bowles, and C.J. Davidson: Mater. Sci. Eng. A 2005, vol. 402, pp. 269–77. DOI:10.1016/j.msea.2005.04.024.10.1016/j.msea.2005.04.024 ↗
2. K.V. Yang, C.H. Caceres, A.V. Nagasekhar, M.A. Easton: Mater. Sci. Eng. A 2012, vol. 542, pp. 49-55. DOI:10.1016/j.msea.2012.02.029.10.1016/j.msea.2012.02.029 ↗
3. D. Amberger, P. Eisenlohr, M. Goken: Acta Mater. 2012, vol. 60, pp. 2277–89. DOI:10.1016/j.actamat.2012.01.017.10.1016/j.actamat.2012.01.017 ↗
4. B.S. Shin, J.W. Kwon, D.H. Bae: Met. Mater. Int. 2009, vol. 15, pp. 203-207, DOI:10.1007/s12540-009-0203-8.10.1007/s12540-009-0203-8 ↗
5. T. Aune and H. Westengen, ed.: SAE Technical Paper 950424, SAE, Warrendale, PA, 1995), pp. 332–42.
6. D.J. Sakkinen, ed.: in SAE Technical Paper 940779, SAE, Warrendale, PA, 1994, pp. 558–69.
7. T.L. Chia, M.A. Easton, S.M. Zhu, M.A. Gibson, N. Birbilis, and J.F. Nie: Intermetallics 2009, vol. 17, pp. 481–90. DOI:10.1016/j.intermet.2008.12.009.10.1016/j.intermet.2008.12.009 ↗
8. A.V. Nagasekhar, C.H. Caceres, and C. Kong: Mater. Charact. 2010, vol. 61, pp. 1035–42. DOI:10.1016/j.matchar.2010.06.007.10.1016/j.matchar.2010.06.007 ↗
9. B. Zhang, A.V. Nagasekhar, T. Sivarupan, and C.H. Caceres: Adv. Eng. Mater. 2013, vol. 15, pp. 1059-1067. DOI:10.1002/adem.201300138.10.1002/adem.201300138 ↗
10. B. Zhang, A. V. Nagasekhar, X. Tao, Y. Ouyang, C. H. Caceres, and M. Easton: Mater. Sci. Eng. A 2014, vol. 599, pp. 204-211. DOI:10.1016/j.msea.2014.01.074.10.1016/j.msea.2014.01.074 ↗
11. S. Gavras, S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: in Magnesium 2012: 9th International Conference on Magnesium Alloys and Their Applications, W.J. Poole and K.U. Kainer, eds., Vancouver, 2012, pp. 757–62.
12. M.A. Easton, M.A. Gibson, D. Qiu, S.M. Zhu, J. Grobner, R. Schmid-Fetzer, J.F. Nie, and M.X. Zhang: Acta Mater. 2012, vol. 60, pp. 4420-4430, 10.1016/j.actamat.2012.04.039.10.1016/j.actamat.2012.04.039 ↗
13. ImageJ: Image Processing and Analysis in Java. http://rsb.info.nih.gov/ij/, Accessed 24 Oct 2013.
14. B. Cantor and G.A. Chadwick: J. Mater. Sci. 1975, vol. 10, pp. 578-88. DOI:10.1007/BF00566564.10.1007/BF00566564 ↗
15. M. Sahoo and R.W. Smith: Met. Sci. 1975, vol. 9, pp. 217-222. DOI:10.1179/030634575790444874.10.1179/030634575790444874 ↗
16. Amira: Amira 3.1 User’s Guide and Reference Manual. http://www.amira.com/documentation.html, Accessed 5 Sept 2011.
17. D. Hull: An introduction to composite materials (Cambridge University Press, Cambridge, 1981).
18. C.H. Cáceres and P. Lukác: Philos. Mag. A 2008, vol. 88, pp. 977–89. DOI:10.1080/14786430801968611.10.1080/14786430801968611 ↗
19. J. Wrobel, L.G. HectorJr, W. Wolf, S.L. Shang, Z.K. Liu, and K.J. Kurzydlowski: J. Alloy. Compd. 2012, vol. 512, pp. 296-310. DOI:10.1016/j.jallcom.2011.09.085.10.1016/j.jallcom.2011.09.085 ↗
20. T. Sumitomo, C.H. Cáceres, and M. Veidt: J. Light Met. 2002, vol. 2, pp. 49-56. DOI:10.1016/S1471-5317(02)00013-5.10.1016/S1471-5317(02)00013-5 ↗
21. H. Zhang and S. Wang: Acta Metall. Sin. 2012, vol. 48, pp. 889–94. DOI:10.3724/SP.J.1037.2012.00089.10.3724/SP.J.1037.2012.00089 ↗
22. O.C. Zienkiewicz, R.L. Taylor: The Finite Element Method 1989, vol. McGraw-Hill, Maidenhead.
23. M.F. Ashby and Y.J.M. Brechet: Acta Mater. 2003, vol. 51, pp. 5801–21. DOI:10.1016/S1359-6454(03)00441-5.10.1016/S1359-6454(03)00441-5 ↗
24. V.S. Deshpande, M.F. Ashby, and N.A. Fleck: Acta Materialia 2001, vol. 49, pp. 1035–40. DOI:10.1016/S1359-6454(00)00379-7.10.1016/S1359-6454(00)00379-7 ↗
25. L.M. Brown and W.M. Stobbs: Philos. Mag. 1971, vol. 23, pp. 1185-1199. DOI:10.1080/14786437108217405.10.1080/14786437108217405 ↗
26. L.M. Brown and W.M. Stobbs: Philos. Mag. 1971, vol. 23, pp. 1201-1233. DOI:10.1080/14786437108217406.10.1080/14786437108217406 ↗
27. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Philos. Mag. A 1999, vol. 79, pp. 1671–96. DOI:10.1080/01418619908210386.10.1080/01418619908210386 ↗
28. C.H. Cáceres, J.R. Griffiths, and P. Reiner: Acta Mater. 1996, vol. 44, pp. 15-23. DOI:10.1016/1359-6454(95)00171-6.10.1016/1359-6454(95)00171-6 ↗
29. C.H. Cáceres: Aluminum Transactions 1999, vol. 1, pp. 1-13.
30. Y. Brechet, J.D. Embury, S. Tao, and L. Luo: Acta Metall. Mater. 1991, vol. 39, pp. 1781–86. DOI:10.1016/0956-7151(91)90146-R.10.1016/0956-7151(91)90146-R ↗
31. C.H. Cáceres and J.R. Griffiths: Acta Mater. 1996, vol. 44, pp. 25-33. DOI:10.1016/1359-6454(95)00172-8.10.1016/1359-6454(95)00172-8 ↗
32. P.J. Withers, W.M. Stobbs, and O.B. Pedersen: Acta Metall. 1989, vol. 37, pp. 3061–84. DOI:10.1016/0001-6160(89)90341-6.10.1016/0001-6160(89)90341-6 ↗
33. L.L. Rokhlin: Magnesium Alloys Containing Rare Earth Metals (Taylor & Francis, New York, 2003).10.1201/9781482265163 ↗
34. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd. 2009, vol. 472, pp. 234–40. DOI:10.1016/j.jallcom.2008.04.049.10.1016/j.jallcom.2008.04.049 ↗
35. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd. 2009, vol. 481, pp. 379–84. DOI:10.1016/j.jallcom.2009.02.131.10.1016/j.jallcom.2009.02.131 ↗
36. A.H. Blake and C.H. Cáceres: Materials Science and Engineering A 2008, vol. 483-484, pp. 161–63. DOI:10.1016/j.msea.2006.10.205.10.1016/j.msea.2006.10.205 ↗
37. D.S. Gencheva, A.A. Katsnel’son, L.L. Rokhlin, V.M. Silonov, and F.A. Khavadzha: Fiz. metal. metalloved. 1981, vol. 51, pp. 788-793.
38. C.H. Caceres and S. Abaspour: in Magnesium Technology, N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, eds., TMS, Wiley, 2013, pp. 225–30. DOI:10.1002/9781118663004.10.1002/9781118663004 ↗
39. H.I. Laukli, O. Lohne, S. Sannes, H. Gjestland, and L. Arnberg: Int. J. Cast Metals Res. 2003, vol. 16, pp. 515-521.10.1080/13640461.2003.11819629 ↗
40. H.I. Laukli, C.M. Gourlay, and A.K. Dahle: Metall. Mater. Trans. A 2005, vol. 36, pp. 805-818. DOI:10.1007/s11661-005-1011-5.10.1007/s11661-005-1011-5 ↗
41. K.V. Yang, M.A. Easton, and C.H. Caceres: Mater. Sci. Eng. A 2013, vol. 580, pp. 191-195. DOI:10.1016/j.msea.2013.05.017.10.1016/j.msea.2013.05.017 ↗
42. K.V. Yang, C.H. Caceres, and M.A. Easton: Metall. Mater. Trans. A, 2014, in press. DOI:10.1007/s11661-014-2326-x.10.1007/s11661-014-2326-x ↗
43. K.V. Yang, C.H. Caceres, and M.A. Easton: Mater. Sci. Eng. A 2013, vol. 580, pp. 355–361. DOI:10.1016/j.msea.2013.05.018.10.1016/j.msea.2013.05.018 ↗