journal article·2015-07

Restriction of Phase Transformation in Carbon Nanotube-Reinforced Yttria-Stabilized Zirconia

Pratyasha Mohapatra, Siddharth Rawat, Neelima Mahato, Kantesh Balani

Publisher page

Abstract

The present research aims to investigate the effect of multi-walled carbon nanotube (MWNT) reinforcement on the mechanism of transformation toughening in zirconia matrix, and consequently, its fracture toughness. Monoclinic zirconia (un-doped ZrO2), partially stabilized zirconia (3 mol pct yttria-stabilized zirconia (3 mol pct YSZ)), and fully stabilized cubic zirconia (8 mol pct YSZ) with and without 6 vol pct MWNT-reinforced nanocomposites were processed via multi-stage spark plasma sintering. Phase analysis of powders, and sintered and crushed pellets performed using X-ray diffraction reveals the absence of any phase transformation in monoclinic ZrO2, 8 mol pct YSZ and their MWNT-reinforced nanocomposites upon application of stress by means of crushing. However, a significant decrease in the stress-induced phase transformation (81.1 pct metastable tetragonal phase retained with 6 vol pct MWNT reinforcement when compared to that of 68.4 pct tetragonal phase in 3 mol pct YSZ) is observed in the crushed pellet samples of partially stabilized zirconia upon 6 vol pct MWNT reinforcement. Transmission electron microscopy has been utilized for complementary phase analysis. Evaluation of mechanical properties indicates enhancement in fracture toughness (~23.6 to 26.4 pct) with the incorporation of 6 vol pct MWNT. Isolation of the net toughening contribution suggests that MWNT toughening mechanisms are ~3.8 times more effective than transformation toughening in enhancing the fracture toughness of YSZ/MWNT nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. M. Sayer, and K. Sreenivas: Science, 2013, vol. 247, pp. 1056–60.10.1126/science.247.4946.1056 ↗
2. M. Mazaheri, D. Mari, Z.R. Hesabi, R. Schaller, and G. Fantozzi: Compos. Sci. Technol., 2011, vol. 71, pp. 939–45.10.1016/j.compscitech.2011.01.017 ↗
3. M. Mazaheri, D. Mari, R. Schaller, G. Bonnefont, and G. Fantozzi: J. Eur. Ceram. Soc., 2010, vol. 31, pp. 2691–98.10.1016/j.jeurceramsoc.2010.11.009 ↗
4. B.R. Lawn, N.P. Padture, H. Cai, and F. Guiberteau: Science, 1994, vol. 263, pp. 1114–16.10.1126/science.263.5150.1114 ↗
5. M.A.F. Afzal, P. Kesarwani, K.M. Reddy, S. Kalmodia, B. Basu, and K. Balani: Mater. Sci. Eng. C, 2012, vol. 32, pp. 1164–73.10.1016/j.msec.2012.03.003 ↗
6. J.R. Kelly, and I. Denry: Dent. Mater., 2008, vol. 24, pp. 289–98.10.1016/j.dental.2007.05.005 ↗
7. G. M. Woken: J. Am. Ceram. Soc., 1963, vol. 46, pp. 418–22.10.1111/j.1151-2916.1963.tb11768.x ↗
8. A. G. Evans, N. Burlingame, M. Drory, and W. M. Kriven: Acta Metall., 1981, vol. 29, pp. 447–56.10.1016/0001-6160(81)90170-X ↗
9. A. H. Heuer, N. Claussen, W. M. Kriven, and M. Rühle: J. Am. Ceram. Soc., 1982, vol. 65, pp. 642–50.10.1111/j.1151-2916.1982.tb09946.x ↗
10. M.C.A. Nono: Materials Science Forum, 2005, vol. 498, pp. 506–511.10.4028/www.scientific.net/MSF.498-499.506 ↗
11. E.P. Butler: Materials Science and Technology, 1985, vol. 1, pp. 417–32.10.1179/mst.1985.1.6.417 ↗
12. J. Chevalier, and L. Gremillardw: Journal of the American Ceramic Society, 2009, vol. 92, pp. 1901–20.10.1111/j.1551-2916.2009.03278.x ↗
13. M.V. Swain: Nature, 1986, vol 322, pp. 234–36.10.1038/322234a0 ↗
14. M.M.J. Treacy, T.W. Ebbesen, and J.M. Gibson: Nature, 1996, vol. 381, pp. 678–80.10.1038/381678a0 ↗
15. A. Rishabh, M.R. Joshi, and K. Balani: Journal of Applied Physics, 2010, vol. 107, pp. 123532-1–123532-7.10.1063/1.3445869 ↗
16. J.P. Salvetat, J.M. Bonard, N.H. Thomson, A.J. Kulik, L. Forró, W. Benoit, and L. Zuppiroli: Appl. Phys. A, 1999, vol. 69, pp. 255–60.10.1007/s003390050999 ↗
17. C. Li, and T.W. Chou: Compos. Sci. Technol., 2003, vol. 63, pp. 1517–24.10.1016/S0266-3538(03)00072-1 ↗
18. C. Laurent, and E. Flahaut, and A. Peigney: Carbon, 2010, vol. 48, pp. 2994–96.10.1016/j.carbon.2010.04.010 ↗
19. M.R. Ayatollahi, S. Shadlou, M.M. Shokrieh, and M. Chitsazzadeh: Polym. Testing, 2011, vol. 30, pp. 548–56.10.1016/j.polymertesting.2011.04.008 ↗
20. B.G. Demczyk, Y.M. Wang, J. Cumings, M. Hetman,W. Han, A. Zettl, and R.O. Ritchie: Mater. Sci. Eng. A, 2002, vol. 334, pp. 173–78.10.1016/S0921-5093(01)01807-X ↗
21. R.H. Baughman, A.A. Zakhidov, and W.A. de Heer: Science, 2002, vol. 297, pp. 787–92.10.1126/science.1060928 ↗
22. D. Ahn, X. Xiao, Y. Li, A.K. Sachdev, H.W. Park, A. Yu, and Z. Chen: Journal of Power Sources, 2012, vol. 212, pp. 66–72.10.1016/j.jpowsour.2012.03.075 ↗
23. K. Balani, R. Anderson, T. Laha, M. Andara, J. Tercero, E. Crumpler, and A. Agarwal: Biomaterials, 2007, vol. 28, pp. 618–24.10.1016/j.biomaterials.2006.09.013 ↗
24. J. Sun, L. Gao, M. Iwasa, T. Nakayama, and K. Niihara: Ceram. Int., 2005, vol. 31, pp. 1131–34.10.1016/j.ceramint.2004.11.010 ↗
25. N. Garmendia, S. Grandjean, J. Chevalier, L.A. Diaz, R. Torrecillas, and I. Obieta: Journal of the European Ceramic Society, 2011, vol. 31, pp. 1009–14.10.1016/j.jeurceramsoc.2010.12.029 ↗
26. A. Duszova, J. Dusza, K. Tomasek, G. Blugan, J. Keubler (2008) J. Eur. Ceram. Soc., 28(5):1023–27.10.1016/j.jeurceramsoc.2007.09.011 ↗
27. K. Balani and A. Agarwal: J. Appl. Phys., 2008, vol. 104, art. id. 063517.10.1063/1.2978185 ↗
28. S.S. Scherrer, I.L. Denry, H.W.A. Wiskott (1998) Dental Materials: 14(4):246–55.10.1016/S0109-5641(98)00032-3 ↗
29. X. Wang, N.P. Padture, and H. Tanaka: Nature Materials, 2004, vol. 3(8), pp. 539-44.10.1038/nmat1161 ↗
30. B.W. Sheldon, and W.A. Curtin: Nature Materials, 2004, vol. 3(8), pp. 505–06.10.1038/nmat1174 ↗
31. J. Cho, F. Inam, M.J. Reece, Z. Chlup, I. Dlouhy, M.S.P. Shaffer, and A.R. Boccaccini: J. Mater. Sci., 2011, vol. 46, pp. 4770–79.10.1007/s10853-011-5387-x ↗
32. G.D. Quinn, R.C. Bradt (2007) J. Am. Ceram. Soc. 90(3):673–80.10.1111/j.1551-2916.2006.01482.x ↗
33. C.B. Ponton, R.D. Rawlings (1989) Mater. Sci. Technol. 5(9):865–72.10.1179/mst.1989.5.9.865 ↗
34. R. Banerjee, and I. Manna: Ceramic Nanocomposites. Woodhead Publishing, Cambridge, 2013.10.1533/9780857093493 ↗
35. R. Poyato, A. Gallardo-López, F. Gutiérrez-Mora, A. Morales-Rodríguez, A. Muñoz, and A. Domínguez-Rodríguez: J. Eur. Ceram. Soc., 2014, vol. 34(6), pp. 1571–79.10.1016/j.jeurceramsoc.2013.12.024 ↗
36. U. Anselmi-Tamburini, J.E. Garay, Z.A. Munir, A. Tacca, F. Maglia, G. Chiodelli, and G. Spinolo: Journal of Materials Research, 2004, vol. 19, pp. 3263–69.10.1557/JMR.2004.0424 ↗
37. V. Viswanathan, T. Laha, K. Balani, A. Agarwal, and S. Seal: Materials Science and Engineering R, 2006, vol. 54, pp. 121–285.10.1016/j.mser.2006.11.002 ↗
38. K.M. Reddy, A. Mukhopadhyay, and B. Basu: Journal of The European Ceramic Society, 2010, vol. 30, pp. 3363–75.10.1016/j.jeurceramsoc.2010.08.005 ↗
39. K.M. Reddy, N. Kumar, and B. Basu: Scripta Materialia, 2010, vol. 62, pp. 435–38.10.1016/j.scriptamat.2009.11.030 ↗
40. G.R. Antsis, P. Chantikol, B.K. Lawn, and D.B.A. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
41. J. Jiawen, C. Aimin, Y. Bangchao, and Z. Yikang: Sci. China Ser. E, 2004, vol. 47 (5), pp. 569–76.10.1360/04ye0074 ↗
42. O. Bezdorozhev, H. Borodianska, Y. Sakka, O. Vasylkiv: Journal of Nanoscience and Nanotechnology, 2011, vol. 11, pp. 7901–09.10.1166/jnn.2011.4716 ↗
43. G. Bernard-Granger, C. Guizard, S. Surble, G. Baldonozzi, A. Addad: Acta Mater., 2008, vol. 56, pp. 4658–72.10.1016/j.actamat.2008.05.031 ↗
44. H. Luo, D. Goberman, L. Shaw, and M. Gell: Mater. Sci. Eng. A, 2003, vol. 346, pp. 237–45.10.1016/S0921-5093(02)00523-3 ↗
45. S. Kalmodia, S. Goenka, T. Laha, D. Lahiri, B. Basu, and K. Balani: Mater. Sci. Eng. C, 2010, vol. 30, pp. 1162–69.10.1016/j.msec.2010.06.009 ↗
46. T. Ukai, T. Sekino, A.T. Hivrvonen, N. Tanaka, T. Kusunose, T. Nakayama, K. Nihara: Key Eng. Mater., 2006, vol. 317-318, pp. 661–64. doi:10.1016/j.msec.2010.06.009.10.4028/www.scientific.net/KEM.317-318.661 ↗
47. A. Morales-Rodríguez, A. Gallardo-López, A. Fernández-Serrano, R. Poyato, A. Muñoz, A. Domínguez-Rodríguez: J. Eur. Ceram. Soc., 2014, vol. 34(15), pp. 3801–09.10.1016/j.jeurceramsoc.2014.05.048 ↗
48. M.A.F. Afzal, S. Kalmodia, P. Kesarwani, B. Basu, and K. Balani: J. Biomater. Appl., 2013, vol. 27, pp. 967–78.10.1177/0885328211431856 ↗
49. X. Jin, L. Wu, G. Licheng, and S. Yuguo: Compos. Sci. Technol., 2009, vol. 69, pp. 1587–91.10.1016/j.compscitech.2009.02.032 ↗
50. J. Zhou, J. Mah, P. Shrotriya, C. Mercer, and W. O. Soboyejo: Journal of Materials Science: Materials in Medicine, 2007, vol. 18, pp. 71–78.10.1007/s10856-006-0664-y ↗
51. B.V. Menvie, G. Sattonnay, C. Legros, A.M. Huntz, S. Poissonnet, and L. Thomé: Journal of Nuclear Materials, 2009, vol. 384, pp. 70–76.10.1016/j.jnucmat.2008.10.007 ↗
52. Z. Xia, L. Riester, W.A. Curtin, H. Li, B.W. Sheldon, J. Liang, B. Chang, and J.M. Xu: Acta Materialia, 2004, vol. 52, pp. 931–44.10.1016/j.actamat.2003.10.050 ↗
53. S. Costa, E. Borowiak-palen, M. Kruszyńska, A. Bachmatiuk, and R.J. Kaleńczuk: Mater. Sci. Pol., 2008, vol. 26, pp. 433–41.
54. L. Bokobza, and J. Zhang: Express Polym. Lett., 2012, vol. 6, pp. 601–08.10.3144/expresspolymlett.2012.63 ↗
55. P.V. Huong, R. Cavagnat, P.M. Ajayan, and O. Stephan: Physical Review B, 1995, vol. 51, pp. 10048–51.10.1103/PhysRevB.51.10048 ↗