Elevated-Temperature Mechanical Behavior of As-Cast and Wrought Ti-6Al-4V-1B
Source abstract
Abstract
This work studied the effect of processing on the elevated-temperature [728 K (455 °C)] fatigue deformation behavior of Ti-6Al-4V-1B for maximum applied stresses between 300 to 700 MPa (R = 0.1, 5 Hz). The alloy was evaluated in the as-cast form as well as in three wrought forms: cast-and-extruded, powder metallurgy (PM) rolled, and PM extruded. Processing caused significant differences in the microstructure, which in turn impacted the fatigue properties. The PM-extruded material exhibited a fine equiaxed α + β microstructure and the greatest fatigue resistance among all the studied materials. The β-phase field extrusion followed by cooling resulted in a strong α-phase texture in which the basal plane was predominately oriented perpendicular to the extrusion axis. The TiB whiskers were also aligned in the extrusion direction. The α-phase texture in the extrusions resulted in tensile-strength anisotropy. The tensile strength in the transverse orientation was lower than that in the longitudinal orientation, but the strength in the transverse orientation remained greater than that for the as-cast Ti-6Al-4V. The ratcheting behavior during fatigue is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. W.O. Soboyejo, R.J. Lederich, and S.M.L. Sastry: Acta Metall., 1994, vol. 42, pp. 2579–91.10.1016/0956-7151(94)90199-6 ↗
2. S. Tamirisakandala, D.B. Miracle, R. Srinivasan, and J.S. Gunasekera: Adv. Mater. Process., 2006, vol. 12, pp. 41–43.
3. W. Chen, C.J. Boehlert, E.A. Payzant, and J.Y. Howe: Int. J. Fatigue, 2010, vol. 32, pp. 627–38.10.1016/j.ijfatigue.2009.04.013 ↗
4. K.B. Panda and K.S. Ravi Chandran: Acta Mater., 2006, vol. 54, pp. 1641–57.10.1016/j.actamat.2005.12.003 ↗
5. S. Tamirisakandala, R.B. Bhat, J.S. Tiley, and D.B. Miracle: Scripta Mater., 2005, vol. 53, pp. 1421–26.10.1016/j.scriptamat.2005.08.020 ↗
6. S. Gorsse and D.B. Miracle: Acta Mater., 2003, vol. 51, pp. 2427–42.10.1016/S1359-6454(02)00510-4 ↗
7. K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay: JOM, 2004, vol. 56, pp. 42–48.10.1007/s11837-004-0127-1 ↗
8. T. Saito: JOM, 2004, vol. 56, pp. 33–36.10.1007/s11837-004-0125-3 ↗
9. W. Chen and C.J. Boehlert: Mater. Sci. Eng. A, 2008, vol. 494, pp. 132–38.10.1016/j.msea.2008.04.004 ↗
10. C.J. Boehlert and W. Chen: Mater. Trans., 2009, vol. 50, pp. 1690–1703.10.2320/matertrans.MF200914 ↗
11. C. Schuh and D.C. Dunand: Scripta Mater., 2001, vol. 45, pp. 631–38.10.1016/S1359-6462(01)01072-7 ↗
12. S.I. Lieberman: Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA, 2007.
13. T.M.T. Godfrey, A. Wisbey, P.S. Goodwin, K. Bagnall, and C.M. Ward-Close: Mater. Sci. Eng. A, 2000, vol. 282, pp. 240–50.10.1016/S0921-5093(99)00699-1 ↗
14. W.O. Soboyejo, W. Shen, and T.S. Srivatsan: Mech. Mater., 2004, vol. 36, pp. 141–59.10.1016/S0167-6636(03)00036-X ↗
15. W. Lu, D. Zhang, Z. Zhang, R. Wu, T. Sakata, and H. Mori: Scripta Mater., 2001, vol. 44, pp. 2449–55.10.1016/S1359-6462(01)00926-5 ↗
16. I. Sen, S. Tamirisakandala, D.B. Miracle, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4983–93.10.1016/j.actamat.2007.05.009 ↗
17. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, and D.B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465–68.10.1016/j.scriptamat.2006.05.008 ↗
18. C.J. Boehlert, S. Tamirisakandala, W.A. Curtin, and D.B. Miracle: Scripta Mater., 2009, vol. 61, pp. 245–48.10.1016/j.scriptamat.2009.03.054 ↗
19. I. Sen, K. Gopinath, R. Datta, and U. Ramamurty: Acta Mater., 2010, vol. 58, pp. 6799–6809.10.1016/j.actamat.2010.09.008 ↗
20. S.I. Lieberman, A.M. Gokhale, S. Tamirisakandala, and R.B. Bhat: Mater. Characterization, 2009, vol. 60, pp. 957–63.10.1016/j.matchar.2009.03.013 ↗
21. I. Sen, L. Maheshwari, S. Tamirisakandala, D.B. Miracle, and U. Ramamurty: Mater. Sci. Eng. A, 2009, vol. 518, pp. 162–66.10.1016/j.msea.2009.04.039 ↗
22. F. Yolton: Paper presented at the 138th TMS Annual Meeting and Exhibition, Orlando, FL, 2007.
23. G.A. Hartman and S.M. Russ: in Metal Matrix Composites: Testing, Analysis and Failure Modes, W.S. Johnson, ed., ASTM, Philadelphia, PA, 1989, pp. 43–53.10.1520/STP22848S ↗
24. K. Van Acker, J. Root, P. Van Houtte, and E. Aernoudt: Acta Mater., 1996, vol. 44, pp. 4039–49.10.1016/S1359-6454(96)00051-1 ↗
25. H.G. Read: Scripta Mater., 1997, vol. 36, pp. 921–28.10.1016/S1359-6462(96)00469-1 ↗
26. W.G. Burgers: Physica, 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
27. Allvac technical data sheet. Available from: http://www.allvac.com/allvac/pages/PDF/tech/TI-040pct20Tipct206-4.pdf.
28. S. Tamirisakandala, R.B. Bhat, D.B. Miracle, S. Boddapati, R. Bordia, R. Vanover, and V.K. Vasudevan: Scripta Mater., 2005, vol. 53, pp. 217–22.10.1016/j.scriptamat.2005.03.038 ↗
29. R.B. Bhat, S. Tamirisakandala, D.B. Miracle, and V.A. Ravi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 845–57.
30. R. Boyer, G. Welsch, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, p. 5.
31. C. Schuh and D.C. Dunand: Int. J. Plasticity, 2001, vol. 17, pp. 317–40.10.1016/S0749-6419(00)00038-3 ↗
32. T.R. Bieler, P.D. Nicolaou, and S.L. Semiatin: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 129–40.10.1007/s11661-005-0145-9 ↗
33. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. 392, pp. 403–14.10.1016/j.msea.2004.09.072 ↗
34. J.A. Vreeling, V. Ocelik, and J.T.M. De Hosson: Acta Mater., 2002, vol. 50, pp. 4913–24.10.1016/S1359-6454(02)00366-X ↗
35. G.G.E. Seward, S. Celotto, D.J. Prior, J. Wheeler, and R.C. Pond: Acta Mater., 2004, vol. 52, pp. 821–32.10.1016/j.actamat.2003.10.049 ↗
36. I. Lonardelli, N. Gey, H.R. Wenk, M. Humbert, S.C. Vogel, and L. Lutterotti: Acta Mater., 2007, vol. 55, pp. 5718–27.10.1016/j.actamat.2007.06.017 ↗
37. G. Lütjering and J.C. Williams: Titanium, Springer-Verlag, Berlin, 2007, pp. 218–27.
38. F.H. Froes: in Handbook of Advanced Materials, J.K. Wessel, John Wiley and Sons, Inc., New York, NY, 2004, pp. 271–319.10.1002/0471465186.ch8 ↗
39. M. Peters, A. Gysler, and G. Lütjering: in Titanium ‘80, Science and Technology, H. Kimura and O. Izumi, eds., TMS-AIME, Warrendale, PA, 1981, vol. 1, pp. 1777–86.
40. C.A. Stubbington and A.W. Bowen: J. Mater. Sci., 1974, vol. 9, pp. 941–47.10.1007/BF00570387 ↗
41. J.C. Williams and G. Lütjering: Titanium ‘80, Science and Technology, TMS-AIME, Warrendale, PA, 1981, vol. 1, pp. 671–82.
42. M. Peters, and G. Lütjering: Report No. CS-2933, Electric Power Research Institute, Palo Alto, CA, 1983.
43. W. Trojahn: Diploma Thesis, Ruhr University Bochum, Bochum, Germany, 1980.
44. L. Wagner and J.K. Bigoney: in Titanium and Titanium Alloys: Fundamentals and Applications, C. Leyens and M. Peters, eds., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2003, pp. 153–85.10.1002/3527602119.ch5 ↗
45. N.E. Paton, R.G. Baggerly, and J.C. Williams: Rockwell Report No. SC 526.7FR, Rockwell, Seal Beach, CA, 1976.
46. T. Hassan and S. Kyriakides: Int. J. Plasticity, 1994, vol. 10, pp. 149–84.10.1016/0749-6419(94)90033-7 ↗
47. W. Chen and C.J. Boehlert: Key Eng. Mater., 2010, vol. 436, pp. 195–203.10.4028/www.scientific.net/KEM.436.195 ↗