journal article·2010-09

Corrosion Behavior of Friction Stir-Processed and Gas Tungsten Arc-Welded Ti-6Al-4V

Masoud Atapour, Adam L. Pilchak, G.S. Frankel, James C. Williams

Publisher page

Abstract

The corrosion behavior of the investment-cast Ti-6Al-4V alloy in 5-pct HCl solution was investigated after gas tungsten arc welding and friction stir (FS) processing. The FS-processed samples exhibited superior corrosion behavior compared with the base metal and the arc-welded samples. The inferior corrosion resistance of the arc weldment was attributed to the acicular α and β microstructure and the alloying element partitioning between the phases. This was confirmed by scanning electron microscopy evaluations of the surface of specimens that had been immersed 50 hours in 20-pct HCl at 308 K (35 °C). In addition, the results indicated that vanadium as an alloying element has a detrimental effect on the corrosion performance of Ti-6Al-4V alloy in an HCl solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. G. Lutjering and J.C. Williams: Titanium, Springer Verlag, New York, NY, 2007.
2. R. Boyer, G. Welsch, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994.
3. D.L. Hallum and W.A. Baeslack, Welding J., 1990, vol. 69, p. S326.
4. W.R. Oates and A.M. Saitta: Welding Handbook, Titanium and Titanium Alloys, American Welding Society, Ann Arbor, MI, 1998, p. 510.
5. T. Mohandas, D. Banerjee, and V.V.K. Rao: Metall. Mater. Trans. A, 1999, vol 30A, p. 789.10.1007/s11661-999-1011-y ↗
6. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: European Patent No. 0-615-480, 1991.
7. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Metall. Mater. Trans. A, 2006, vol. 37A, p. 3323.10.1007/BF02586167 ↗
8. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 1999, vol. 42, p. 163.10.1016/S1359-6462(99)00329-2 ↗
9. J.E. Spowart, Z.Y. Ma, and R.S. Mishra: Symposium on Friction Stir Welding and Processing II, TMS, San Diego, CA, 2003, p. 243.
10. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, p. 642.10.1007/s11661-007-9459-0 ↗
11. K. Oh-Ishi and T.R. McNelley: TMS/ASM Annual Meeting, San Diego, CA, 2004, p. 2951.10.1007/s11661-004-0242-1 ↗
12. K. Oh-Ishi and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, p. 1575.10.1007/s11661-005-0249-2 ↗
13. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, p. 401.10.1007/s11661-006-9061-x ↗
14. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, p. 435.10.1007/s11661-006-9059-4 ↗
15. A.L. Pilchak, M.C. Juhas, and J.C. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, p. 1376.10.1007/s11661-007-9195-5 ↗
16. J. Been and J.S. Grauman: Titanium and Ttitanium Alloys, Wiley, Hoboken, NJ, 2000, p. 864.
17. T. Fukuzuka, K. Shermogori, H. Satoh, and F. Kamikubo: 4th International Conference on Titanium, Metallurgical of AMIE, Kyoto, Japan, 1981, p. 2685.
18. V.S. Raja, R.D. Angal, and M. Suresh: Corrosion, 1993, vol. 49, p. 2.10.5006/1.3316031 ↗
19. R. Mythili, S. Saroja, M. Vijayalakshmi, and V.S. Raghunathan: J. Nucl. Mater., 2005, vol. p. 67.
20. A.L. Pilchak, Z.T. Li, J.J. Fisher, A.P. Reynolds, M.C. Juhas, and J.C. Williams: Symposium on Friction Stir Welding and Processing IV held at the 2007 TMS Annual Meeting, TMS, Orlando, FL, 2007, p. 419.
21. A.L. Pilchak: Ph.D. Dissertation, The Ohio State University, 2009.
22. R.P. Simpson: Welding J., 1977, vol. 56, p. S67.
23. W.R. Oates and A.M. Saitta: Welding Handbook, Titanium and Titanium Alloys, American Welding Society, Ann Arbor, MI, 1998, p. 510.
24. S. Kou: Welding Metallurgy, John Wiley and Sons, Hoboken, NJ, 2003, p. 171.
25. F.J. Gil, M.P. Ginebra, J.M. Manero, and J.A. Planell: J. Alloys Comp., 2001. vol. 329, p. 142.10.1016/S0925-8388(01)01571-7 ↗
26. S.Y. Yu and J.R. Scully: Corrosion, 1997, vol. 53, p. 965.10.5006/1.3290281 ↗
27. A.M. Fekry: Electrochim. Acta, 2009, vol. 54, p. 3480.10.1016/j.electacta.2008.12.060 ↗
28. Z. Han, H. Zhao, X.F. Chen, and H.C. Lin: Mater. Sci. Eng. A, 2000, vol. 277, p. 38.10.1016/S0921-5093(99)00561-4 ↗
29. M. Ask, U. Rolander, J. Lausmaa, and B. Kasemo: JMR, 1990, vol. 5, p. 1662.10.1557/JMR.1990.1662 ↗
30. V. Zwilling, E. Darque-Ceretti, A. Boutry-Forveille, D. David, M.Y. Perrin, and M. Aucouturier: Surf. Interface Anal., 1999, vol. 27, p. 629.10.1002/(SICI)1096-9918(199907)27:7<629::AID-SIA551>3.0.CO;2-0 ↗
31. M. Metikos-Hukovic, A. Kwokal, and J. Piljac: Biomaterials, 2003, vol. 24, p. 3765.10.1016/S0142-9612(03)00252-7 ↗
32. K. Kapoor, V. Kain, T. Gopalkrishna, T. Sanyal, and P.K. De: J. Nucl. Mater., 2003, vol. 322, p. 36.10.1016/S0022-3115(03)00302-7 ↗
33. M. Atapour, A. Pilchak, G.S. Frankel, and J.C. Williams: Corr. Sci., in press.
34. S. Sundaresan, G.D.J. Ram, and G.M. Reddy: Mater. Sci. Eng., A, 1999, vol. 262, p. 88.10.1016/S0921-5093(98)01010-7 ↗
35. E.N. Codaro, R.Z. Nakazato, A.L. Horovistiz, L.M.F. Ribeiro, R.B. Ribeiro, and L.R.O. Hein: Mater. Sci. Eng, A, 2003, vol. 341, p. 202.10.1016/S0921-5093(02)00218-6 ↗
36. E. Blasco-Tamarit, A. Igual-Munoz, J.G. Anton, and D.M. Garcia-Garcia: Corr. Sci., 2009, vol. 51, p. 1095.10.1016/j.corsci.2009.02.023 ↗
37. R. Singh, M. Martin, and N.B. Dahotre: Surf. Eng., 2005, vol. 21, p. 297.10.1179/174329405X55320 ↗