journal article·2011-05

Effect of Zr Additions on the Oxidation Kinetics of FeCrAlY Alloys in Low and High pO2 Gases

D. J. Young, D. Naumenko, E. Wessel, L. Singheiser, W. J. Quadakkers

Publisher page

Abstract

Alloys of nominal composition Fe-20Cr-5Al-0.05Y (mass pct) with and without a 0.03 pct Zr addition were isothermally oxidized at temperatures of 1473 to 1573 K (1200 to 1300 °C) in both flowing Ar-O2 and Ar-H2-H2O. Continuous thermogravimetric (TG) measurements of oxygen uptake showed the rates to be faster in both gases for Zr-containing than for the Zr-free alloy. Scale growth on the Zr-bearing alloy by inward oxygen diffusion is accelerated by the fine alumina grain size and the formation of elongated zirconia particles in the two-phase scales. Zirconia formation ceases when the supply of metal in the thin alloy substrate is exhausted, and subsequent single-phase alumina growth proceeds at a slower rate. A simple diffusion model is shown to account semiquantitatively for zirconium enrichment in alumina scales. The presence of hydrogen modifies both oxygen transport in the scale and its permeability in the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. K. Ishii, M. Kohno, S. Ishikawa, and S. Satoh: Mater. Trans. JIM, 1997, vol. 38 (9), pp. 787–92.10.2320/matertrans1989.38.787 ↗
2. J. Klöwer, A. Kolb-Telieps, and M. Brede: in Metal Supported Automotive Catalytic Converters, H. Bode, ed., Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany, 1997, pp. 33–46.
3. B.A. Pint: J. Am. Ceram. Soc., 2003, vol. 86 (4), pp. 686–95.10.1111/j.1151-2916.2003.tb03358.x ↗
4. D. Naumenko, V. Kochubey, L. Niewolak, A. Dymiati, J. Mayer, L. Singheiser, and W.J. Quadakkers: J. Mater. Sci., 2008, vol. 43, pp. 4550–60.10.1007/s10853-008-2639-5 ↗
5. P. Hou: J. Am. Ceram. Soc., 2003, vol. 86 (4), pp. 660–68.10.1111/j.1151-2916.2003.tb03355.x ↗
6. T.A. Ramanarayanan, R. Ayer, R. Petkovic-Luton, and D.P. Leta: Oxid. Met., 1988, vol. 29 (5–6), pp. 445–71.10.1007/BF00666845 ↗
7. A. Kolb-Telieps, D. Naumenko, W.J. Quadakkers, G. Strehl, and R. Newton: in Materials Aspects in Automotive Catalytic Converters, H. Bode, ed., Wiley-VCH, Weinheim, Germany, 2002, pp. 49–58.10.1002/3527600531.ch4 ↗
8. M.J. Bennett, R. Newton, and J.R. Nicholls: Mater. High Temp., 2003, vol. 20 (3), pp. 347–56.10.3184/096034003782748900 ↗
9. D.J. Young, D. Naumenko, L. Niewolak, E. Wessel, L. Singheiser, and W.J. Quadakkers: Mater. Corros., 2010, vol. 61, pp. 838–44.10.1002/maco.200905432 ↗
10. T.H. Gray: in Metal Supported Automotive Catalytic Converters, H. Bode, ed., Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany, 1997, pp. 47–54.
11. E. Wessel, V. Kochubey, D. Naumenko L. Niewolak, L. Singheiser, and W.J. Quadakkers: Scripta Mater., 2004, vol. 51 (10), pp. 987–92.10.1016/j.scriptamat.2004.07.023 ↗
12. D. Naumenko, B. Gleeson, E. Wessel, L. Singheiser, and W.J. Quadakkers: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2974–83.10.1007/s11661-007-9342-z ↗
13. W.J. Quadakkers, D. Naumenko, E. Wessel, V. Kochubey, and L. Singheiser: Oxid. Met., 2004, vol. 61 (1–2), pp. 17–37.10.1023/B:OXID.0000016274.78642.ae ↗
14. J. H. Swisher and E.T. Turkdogan: Trans. TMS-AIME, 1967, vol. 239, pp. 426–31
15. A.D. Pelton, L. Leibowitz, and R.A. Blomquist: J. Nucl. Mater., 1993 vol. 201, pp. 218–24.10.1016/0022-3115(93)90176-Y ↗
16. D. Arias and J.P. Abriata: Bull. Alloy Phase Diagrams, 1988, vol. 9 (5) pp. 597–604.10.1007/BF02881963 ↗
17. C. Wagner: Z. Elektrochemie, 1959, vol. 63, pp. 772–82.
18. R.A. Rapp: Corrosion, 1965, vol. 21, pp. 382–400.10.5006/0010-9312-21.12.382 ↗
19. H.S. Carslaw and J.C. Jaegar: Conduction of Heat in Solids, Clarendon Press, Oxford, United Kingdom, 1959, p. 97.
20. T.A. Ramanarayanan, M. Raghavan, and R. Petkovic-Luton: Oxid. Met., 1984, vol. 22 (3–4), pp. 83–100.10.1007/BF00656898 ↗
21. T.J. Nijdam and W.G. Sloof: Oxid. Met., 2008, vol. 69, pp. 1–12.10.1007/s11085-007-9080-z ↗
22. P. Kofstad: High Temperature Corrosion, Elsevier, London, 1988, p. 195.
23. R.G. Ball, M.A. Mignanelli, T.I. Barry, and J.A. Gisby: J. Nucl. Mater., 1993, vol. 201, pp. 238–49.10.1016/0022-3115(93)90179-3 ↗
24. C.T. Fujii and R.A. Meussner: J. Electrochem. Soc., 1963, vol. 110, pp. 1195–204.10.1149/1.2425624 ↗
25. E. Essuman, G.H. Meier, J. Zurek, M. Hänsel, and W.J. Quadakkers: Oxid. Met., 2008, vol. 69, pp. 143–62.10.1007/s11085-007-9090-x ↗
26. N.K. Das, K. Suzuki, K. Ogawa, and T. Shoji: Corr. Sci., vol. 51 (4), pp. 908–13.10.1016/j.corsci.2009.01.005 ↗
27. I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH Verlag Gesellschaft, Weinheim, Germany, 1995, vol. I, p. 48; vol. II, pp. 1821 and 1880.10.1002/9783527619825 ↗
28. K. Hilpert and M. Miller: Z. Metallkd., 1992, vol. 83, pp. 739–43.
29. A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 1, pp. 1695–700.10.1007/BF02642019 ↗