Numerical Simulation and Experimental Validation of MIG Welding of T-Joints of Thin Aluminum Plates for Top Class Vehicles
Source abstract
Abstract
The integration of experiments with numerical simulations can efficiently support a quick evaluation of the welded joint. In this work, the MIG welding operation on aluminum T-joint thin plate has been studied by the integration of both simulation and experiments. The aim of the paper is to enlarge the global database, to promote the use of thin aluminum sheets in automotive body industries and to provide new data. Since the welding of aluminum thin plates is difficult to control due to high speed of the heat source and high heat flows during heating and cooling, a simulation model could be considered an effective design tool to predict the real phenomena. This integrated approach enables new evaluation possibilities on MIG-welded thin aluminum T-joints, as correspondence between the extension of the microstructural zones and the simulation parameters, material hardness, transient 3D temperature distribution on the surface and inside the material, stresses, strains, and deformations. The results of the mechanical simulations are comparable with the experimental measurements along the welding path, especially considering the variability of the process. The results could well predict the welding-induced distortion, which together with local heating during welding must be anticipated and subsequently minimized and counterbalance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. W.P. Schmidt, et. al: Int. J. Life Cycle Assess., 2004, vol. 9(6), pp. 405–16.10.1007/BF02979084 ↗
2. C. Koffler, K. Rohde-Brandenburger: The International Journal of Life Cycle Assessment, 2010, vol. 15 (1), pp. 128-135.10.1007/s11367-009-0127-z ↗
3. W.J. Joost: The Journal of The Minerals, Metals & Materials Society JOM, 2012, vol. 64 (9), pp. 1032-1038.10.1007/s11837-012-0424-z ↗
4. J.C. Kelly, et al.: Impacts of Vehicle Weight Reduction via Material Substitution on Life-Cycle Greenhouse Gas Emissions, Environ. Sci. Technol., 49 (2015), pp. 12535-1254210.1021/acs.est.5b03192 ↗
5. M. Cavazzuti, et al.: Structural and Multidisciplinary Optimization2011, vol. 44 (1), pp. 45-56.10.1007/s00158-010-0578-7 ↗
6. H. Altenbach: Pro. IMechE Part C: J. Mechanical Engineering Science, 2011, vol. 225(11), pp. 2481-2496.10.1177/0954406211417068 ↗
7. W. Sun, et al.: The Journal of Strain Analysis for Engineering Design Impact, 2014, vol. 49 (6), pp. 410-420.10.1177/0309324714524947 ↗
8. Mayyas, et al.: Renew. Sustain. Energy Rev., 2012, vol. 16(4), pp. 1845–62.10.1016/j.rser.2012.01.012 ↗
9. M. Delogu, et al.: Journal of Cleaner Production, 2016, vol. 139, pp. 548–56010.1016/j.jclepro.2016.08.079 ↗
10. N.A. Husain, et al., H., Proc. IMechE Part C: J. Mechanical Engineering Science, 2010, vol. 224 (4), pp. 851-861.10.1243/09544062JMES1787 ↗
11. W.S. Miller, et al.: Materials Science and Engineering: A, 2000, vol. 280 (1), pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
12. M. Raugei, et al.: Journal of Cleaner Production, vol. 108 (2015), pp. 1168–117610.1016/j.jclepro.2015.05.100 ↗
13. J.F. Tu and A.G. Paleocrassas: Journal of Materials Processing Technology, 2011, vol. 211 (1), pp. 95-102.10.1016/j.jmatprotec.2010.09.001 ↗
14. G. Casalino, et al.: Materials & Design, 2014, vol. 61, pp. 191-198.10.1016/j.matdes.2014.04.060 ↗
15. J. Hirsh: Transactions of Nonferrous Metals Society of China, 2014, vol. 24, pp. 1995−200210.1016/S1003-6326(14)63305-7 ↗
16. S. Zhang, P. Zhu, and W. Chen: Proc. IMechE Part C: J. Mechanical Engineering Science, 2013, vol. 227(7), pp. 1381-1391.10.1177/0954406212460824 ↗
17. S.S. Sabari, et al.: Def. Technol., 2016, vol. 12(4), pp. 324–33
18. H. Long, et al.: Materials & Design, 2009, vol. 30 (10), pp. 4126-4135.10.1016/j.matdes.2009.05.004 ↗
19. D. Deng and H. Murakawa: Computational Materials Science, 2008, vol. 43 (2), pp. 353-365.10.1016/j.commatsci.2007.12.006 ↗
20. M.J. Attarha, I. Sattari-Far: Journal of Materials Processing Technology, 2011, vol. 211(4), pp. 688-694.10.1016/j.jmatprotec.2010.12.003 ↗
21. R. Wang, et al.: Materials & Design, 2009, vol. 30(9), pp. 3474-3481.10.1016/j.matdes.2009.03.015 ↗
22. Y. Liu, et al.: Materials Science and Engineering: A, 2012, vol. 549, pp. 7-13.10.1016/j.msea.2012.03.108 ↗
23. L. Gannon, et al.: Marine Structures., 2010, vol. 23(3), pp. 385-404.10.1016/j.marstruc.2010.05.002 ↗
24. K. Weman: Welding Process Handbook, CRC Press, Boca Raton, 2003, ISBN: 0849317738, 9780849317736.10.1201/9780203499764 ↗
25. K. Masubuchi: Analysis of welded structures: residual stresses, distortions and their consequences, Pergamon Press,Oxford, 2006. ISBN: 978-0-08-022714-6
26. R. Frappier, et al.: Sci. Technol. Weld. Joining, 2014, vol. 19(1), pp. 38–43.10.1179/1362171813Y.0000000158 ↗
27. F. Lefebvre, S. Ganguly, and I. Sinclair: Mater. Sci. Eng. A, 2005, vol. 397(1), pp. 338-345. DOI:10.1016/j.msea.2005.02.051 ↗
28. N.S. Rossini, et al.: Mater. Des., 2012 vol. 35, pp. 572-588.10.1016/j.matdes.2011.08.022 ↗
29. J.F. Nélias, et al.: Int. J. Press., 2011, vol. 88(1), pp. 45–56.
30. Y.N., Li, S.M. Xie, J.H. Zhang: Adv. Mater. Res., 2013, vol. 652, pp. 2303–10.10.4028/www.scientific.net/AMR.652-654.2303 ↗
31. D. Deng: Mater. Des., 2009, vol. 30(2), pp. 359–366.10.1016/j.matdes.2008.04.052 ↗
32. X.K. Zhu and Y.J. Chao: Comput. Struct., 2002, vol. 80(11), pp. 967-97610.1016/S0045-7949(02)00040-8 ↗
33. Z. Barsoum, et al.: Procedia Eng., 2015, vol. 114, pp. 70–7710.1016/j.proeng.2015.08.043 ↗
34. J.A. Goldak, M. Akhlaghi: Computational Welding Mechanics, Springer, New York, 2005
35. P. Biswas, M.M. Mahapatra, N.R. Mandal: Proc. IMechE Part B, 2010, vol. 224(1), pp. 125–34.10.1243/09544054JEM1666 ↗
36. G.A. Moraitis, G.N. Labeas: J. Mater. Process. Technol., 2008, vol. 198(1), pp. 260-269.10.1016/j.jmatprotec.2007.07.013 ↗
37. M.A. Zaeem, M. R. Nami, M.H. Kadivar: Comput. Mater. Sci., 2007, vol. 38(4), pp. 588-594.10.1016/j.commatsci.2006.03.016 ↗
38. S.E. Chidiac, J.K. Brimacombe, I.V. Samarasekera: Appl. Sci. Res., 1993, vol. 51(3), pp. 573-597.10.1007/BF00868001 ↗
39. EN 1999-1-2, “Eurocode 9: Design of aluminium structures—Part 1–2: Structural fire design,” 2007, European Committee for Standardization, Belgium.
40. C. Schwenk, M. Rethmeier: Weld. J., 2011, vol. 90, pp. 220s–227s. ISSN: 0043-2296, 0096-7629
41. J.D. Francis: Welding Simulations of Aluminum Alloy Joints by Finite Element Analysis, Thesis Faculty of the Virginia Polytechnic Institute and State University, Master of Science in Aerospace Engineering, 2002, pp. 52–84.
42. UNI EN ISO 10042, 2007, “Welding - Arc-welded Joints in Aluminium and its Alloys—Quality Levels for Imperfections,” Ente Nazionale Italiano di Unificazione, Italy.
43. O.R. Myhr, O. Grong, and S.J. Andersen: Acta Mater., 2001, vol. 49(1), pp. 65-75.10.1016/S1359-6454(00)00301-3 ↗