Measurement of Thin-film Coating Hardness in the Presence of Contamination and Roughness: Implications for Tribology
Source abstract
Abstract
Standard nanoindentation measurements on commercially available TiAlN, CrN, metal-containing diamond-like carbon, and TiN coatings, deposited on steel substrates were performed to determine coating hardness and elastic modulus. It was found that the coating surface roughness/morphology present after deposition can significantly affect the measurements of nanomechanical properties so that measurements of these properties on the as-deposited coating surface may be significantly different from the bulk. In addition, a surface measurement may produce a lower nanohardness due to the existence of a soft surface contamination layer. A simple method was developed to enable accurate measurement of the nanomechanical properties of coatings, while avoiding errors introduced by surface topography and the presence of superficial contamination layers on thin films. Friction and wear behavior, as well as the wear mechanisms in dry reciprocating sliding contact of the various coatings with a steel ball can be correlated to the surface attributes of each coating in terms of roughness and the presence of contamination layers, both of which are shown to also affect the nanohardness measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. J. Musil: Surface and Coatings Technology, 2000, vol. 125, no. 1-3 pp. 322-330.10.1016/S0257-8972(99)00586-1 ↗
2. H.G. Prengel, W.R. Pfouts, A.T. Santhanam: Surface & Coatings Technology, 1998, vol. 102, no. 3, pp. 183-190.10.1016/S0257-8972(96)03061-7 ↗
3. Y.C. Chim, X.Z. Ding, X.T. Zeng, and S. Zhang: Thin Solid Films, 2009, vol. 517, no. 17, pp. 4845-4849.10.1016/j.tsf.2009.03.038 ↗
4. A.F. Yetim: Surface & Coatings Technology, 2010, vol. 205, no. 6, pp. 1757-1763.10.1016/j.surfcoat.2010.08.079 ↗
5. B. Bhushan and B.K. Gupta: Handbook of Tribology: Materials, coatings, and surface treatments, McGraw-Hill, New York, 1991
6. M. Khorasanian, A. Dehghan, M.H. Shariat, M.E. Bahrololoom, and S. Javadpour: Surface and Coatings Technology, 2011, vol. 206, no. 6, pp. 1495-1502.10.1016/j.surfcoat.2011.09.038 ↗
7. W.C. Oliver and G.M. Pharr: Journal of Materials Research, 1992, vol. 7, no. 6, pp. 1564–1583.10.1557/JMR.1992.1564 ↗
8. A. Tricoteaux, G. Duarte, D. Chicot, E. Le Bourhis, E. Bemporad, and J. Lesage: Mechanics of Materials, 2010, vol. 42, no. 2, pp. 166–174.10.1016/j.mechmat.2009.11.016 ↗
9. A. Cellard, V. Garnier, G. Fantozzi, G. Baretb, and P. Fort: Ceramics International, 2009, vol. 35, no. 2, pp. 913-916.10.1016/j.ceramint.2008.02.022 ↗
10. ISO-14577-4: Metallic Materials, Instrumented Indentation Test for Hardness and Materials Parameters, Part 4: Test method for metallic and non-metallic coatings, 2007
11. T-Y. Zhanga and W-H. Xu: Journal of Materials Research, 2002, vol. 17, no. 7, pp. 1715-1720.10.1557/JMR.2002.0254 ↗
12. M.S. Bobji and S.K. Biswas: Journal of Materials Research, 1999, vol. 14, no. 6, pp. 2259–2268.10.1557/JMR.1999.0302 ↗
13. J-Y. Kim, J-J. Lee, Y-H. Lee, J-I. Jang, and D. Kown: Journal of Materials Research, 2006, vol. 21, no. 12, pp. 2975–2978.10.1557/jmr.2006.0370 ↗
14. L. Karlsson, L. Hultman, M.P. Johansson, J.-E. Sundgren, and H. Ljungcrantz: Surface & Coatings Technology, 2000, vol. 126, no. 1, pp. 1-14.10.1016/S0257-8972(00)00518-1 ↗
15. R. Saha and W.D. Nix: Acta Materialia, 2002, vol. 50, no. 1, pp. 23-38.10.1016/S1359-6454(01)00328-7 ↗
16. J.D. Ellis, S.T. Smith, and R.J. Hocken: Precision Engineering, 2008, vol. 32, no. 3, pp. 207-214.10.1016/j.precisioneng.2007.08.004 ↗