journal article·2007-12Open access

Fracture of Nitinol under Quasistatic and Dynamic Loading

Fengchun Jiang, Kenneth S. Vecchio

Abstract

Owing to the potential application of Nitinol as an advanced structural material, it is essential to thoroughly understand the deformation and fracture behavior of Nitinol under various loading conditions. The present study explores the fracture behavior of Nitinol under quasistatic and dynamic loading, with emphasis on the fracture toughness and fracture mechanism of Nitinol. To this end, the precracked bend sample was employed to perform dynamic fracture testing using a modified (pulse-shaped) Hopkinson-pressure-bar-loaded fracture-testing system. The dynamic fracture initiation toughness was measured under stress-state equilibrium conditions at a loading rate of $$ \sim 106 {\text{MPa}}{\sqrt {\text{m}} }{\text{/s}} $$ . To further investigate the fracture mechanism, additional dynamic fracture tests were performed using double-crack, four-point bend samples. The experimental results indicate that the dynamic fracture toughness of Nitinol is higher than it is under quasistatic loading, and that the loading rate influences the fracture mechanisms of Nitinol. The interplay between the dynamic strength of Nitinol and the activation stress for stress-induced martensite (SIM) transformation plays an important role in the fracture behavior of Nitinol.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. S. Takaoka, H. Horikawa, J. Kobayashi, K. Shimizu: Mater. Sci. Forum, 2002, vols. 394–395, pp. 61–6810.4028/www.scientific.net/MSF.394-395.61 ↗
2. V. Birman: Appl. Mech. Rev., 1997, vol. 50, pp. 629–4510.1115/1.3101674 ↗
3. J. Van Humbeeck: J. Alloys Compd., 2003, vol. 355, pp. 58–6410.1016/S0925-8388(03)00268-8 ↗
4. D.E. Burkes, G. Gottoli, H.C. Yi, J.J. Moore: Metall. Mater. Trans. A, 2001, vol. 32, pp. 731–4310.1007/s11661-001-0089-7 ↗
5. A. Shimamoto, T. Azakami, T. Oguchi: Exp. Mech., 2003, vol. 43, pp. 77–82
6. G. Murasawa, K. Tohgo, H. Ishii: J. Compos. Mater., 2004, vol. 38, pp. 399–41610.1177/0021998304040553 ↗
7. W.D. Armstrong, T. Lorentzen: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3535–4010.1007/s11661-002-0341-9 ↗
8. G.A. Porter, P.K. Liaw, T.N. Tiegs, K.H. Wu: Mater. Sci. Eng., A, 2001, vol. 314, pp. 186–9310.1016/S0921-5093(00)01915-8 ↗
9. D.C. Lagoudas, K. Ravi-Chandar, K. Sarh, P. Popov: Mech. Mater., 2003, vol. 35, pp. 689–71610.1016/S0167-6636(02)00199-0 ↗
10. M. Kusagawa, T. Nakamura, Y. Asada: JSME Int J., Ser. A, 2001, vol. 44, pp. 57–6310.1299/jsmea.44.57 ↗
11. J.A. Shaw, S. Kyriakides: J. Mech. Phys. Solids, 1995, vol. 43, pp. 1243–8110.1016/0022-5096(95)00024-D ↗
12. V.E. Panin, Y. Deryugin, L.S. Derevyagina, A.I. Lotkov, B.I. Suvorov: Theor. Appl. Fract. Mech., 1998, vol. 30, pp. 19–2610.1016/S0167-8442(98)00040-8 ↗
13. Y. Liu, Z. Xie, J. Van Humbeeck, L. Delaey: Acta Mater., 1998, vol. 46, pp. 4325–3810.1016/S1359-6454(98)00112-8 ↗
14. J.M. Mcnaney, V. Imbeni, Y. Jung, P. Papadopoulos, R.O. Ritchie: Mech. Mater., 2003, vol. 35, pp. 969–8610.1016/S0167-6636(02)00310-1 ↗
15. K. Gall, H. Sehitoglu, Y.I. Chumlyako, I.V. Kireeva: Acta Mater., 1999, vol. 47, pp. 1203–1710.1016/S1359-6454(98)00432-7 ↗
16. R. Plietsch, K. Ehrlich: Acta Mater., 1997, vol. 45, pp. 2417–2410.1016/S1359-6454(96)00354-0 ↗
17. K. Jacobus, H. Sehitoglu, M. Balzer: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3066–7310.1007/BF02663855 ↗
18. D.A. Miller, W.R. Thissell, G.T. Gary III, and D.A.S. Macdougall: Adaptive Structures and Materials System, AD, ASME, New York, NY, 2000, vol. 60, pp. 51–5810.1115/IMECE2000-1689 ↗
19. Y. Liu, Y. Li, K.T. Ramesh, J. Van Humbeeck: Scripta Mater., 1999, vol. 41, pp. 89–9510.1016/S1359-6462(99)00058-5 ↗
20. W.W. Chen, Qiuping Wu, Joseph H. Kang, and Nancy A. Winfree: Int. J. Solids Struct., 1002, vol. 38, pp. 8989–9810.1016/S0020-7683(01)00165-2 ↗
21. S. Nemat-Nasser, J.Y. Choi, W.G. Gou, J. Isaacs, M. Taya: J. Eng. Mater. Technol., Trans. ASME, 2005, vol. 127, pp. 83–8910.1115/1.1839215 ↗
22. L. Wang, T. Kobayashi, Y. Harada, K. Tsuchiya: Mater. Sci. Forum, 2005, vols. 475–479, pp. 4191–9410.4028/www.scientific.net/MSF.475-479.4191 ↗
23. R.R. Adharapurapu, F. Jiang, K.S. Vecchio, G.T. Gray III: Acta Mater., 2006, vol. 54, pp. 4609–2010.1016/j.actamat.2006.05.047 ↗
24. K. Gall, N. Yang, H. Sehitoglu, and Y. Chumlyakov: Int. J. Fract., vol. 109, 2001, pp. 189–20710.1023/A:1011069204123 ↗
25. H. Tobushi, T. Nakahara, Y. Shimeno, T. Hashimoto: Trans. ASME, 2000, vol. 122, pp. 186–9110.1115/1.521455 ↗
26. A.L. McKelvey, R.O. Ritchie: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 731–4310.1007/s11661-001-0089-7 ↗
27. T. Sawaguchi, G. Kausträter, A. Yawny, M. Wagner, G. Eggeler: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2847–6010.1007/s11661-003-0186-x ↗
28. R. Vaidyanathan, D.C. Dunand, U. Ramamurty: Mater. Sci. Eng., A, 2000, vol. 289, pp. 208–1610.1016/S0921-5093(00)00882-0 ↗
29. E. Hornbogen: J. Mater. Sci., 2004, vol. 39, pp. 385–9910.1023/B:JMSC.0000011492.88523.d3 ↗
30. H.F. López, A. Salinas, H. Calderón: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 717–2910.1007/s11661-001-1007-8 ↗
31. H.F. López: Mater. Lett., 2002, vol. 51, pp. 144–5010.1016/S0167-577X(01)00281-6 ↗
32. X.M. Wang, Y.F. Wang, A. Baruj, G. Eggeler, Z.F. Yue: Mater. Sci. Eng., A, 2005, vol. 394, pp. 393–9810.1016/j.msea.2004.11.029 ↗
33. V. Birman: Smart Mater. Struct., 1998, vol. 7, pp. 433–3710.1088/0964-1726/7/4/001 ↗
34. G.Z. Wang: Mater. Sci. Eng., A, 2006, vol. 434, pp. 269–7910.1016/j.msea.2006.06.077 ↗
35. G.Z. Wang: Mater. Sci. Eng., A, 2007, vols. 460–461, pp. 383–9110.1016/j.msea.2007.01.154 ↗
36. X. Wang, Z. Yue: Key Eng. Mater., 2006, vols. 324–325, pp. 919–2210.4028/www.scientific.net/KEM.324-325.919 ↗
37. S. Yi, S. Gao: Int. J. Solids Struct., 2000, vol. 37, pp. 5313–27
38. S. Yi, S. Gao, L. Shen: Int. J. Solids Struct., 2001, vol. 38, pp. 4463–7610.1016/S0020-7683(00)00283-3 ↗
39. W. Yan, C.U. Wang, X.P. Zhang, Y.-W. Mai: Smart Mater. Struct., 2002, vol. 11, pp. 947–5510.1088/0964-1726/11/6/316 ↗
40. J.H. Chen, W. Sun, G.Z. Wang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 941–5510.1007/s11661-005-0288-8 ↗
41. J.Y. He, K.W. Gao, Y.J. Su, L.J. Qiao, W.Y. Chu: Smart Mater. Struct., 2004, vol. 13, pp. N24–N2810.1088/0964-1726/13/2/N02 ↗
42. S.W. Robertson, R.O. Ritchie: Biomater., 2007, vol. 28, pp. 700–0910.1016/j.biomaterials.2006.09.034 ↗
43. F. Jiang, K.S. Vecchio, A. Rohatgi: Int. J. Fract., 2004, vol. 126, pp. 143–6410.1023/B:FRAC.0000026363.05467.2b ↗
44. F. Jiang, K.S. Vecchio: Metall. Mater. Trans. A, 2007, vol. 38A, in press10.1007/s11661-007-9349-5 ↗
45. Y. Murakami: Stress Intensity Factor Handbook, vol. 1, Pergamon Press, Oxford, United Kingdom, 1987, p. 687
46. J. Zhang, J. Lewandowski: J. Mater. Sci., 1997, vol. 32, pp. 3851–5610.1023/A:1018692110821 ↗
47. S.-X. Wu, Y.-W. Mai, B. Cotterell, C.V. Le: Acta Metall. Mater., 1991, vol. 39, pp. 2527–3210.1016/0956-7151(91)90068-C ↗
48. M. Coates, A. Kumar, S.G. Roberts: Fatigue Fract. Eng. Mater. Struct., 2006, vol. 29, pp. 661–7110.1111/j.1460-2695.2006.01002.x ↗
49. H.-J. Sue: Polym. Eng. Sci., 1991, vol. 31, pp. 270–7410.1002/pen.760310410 ↗
50. J. Wu, Y.-W. Mai: J. Mater. Sci., 1993, vol. 28, pp. 6167–7710.1007/BF00365039 ↗
51. R.K. Nalla, J.H. Kiney, R.O. Ritchie: Nat. Mater., 2003, vol. 2, pp. 164–6810.1038/nmat832 ↗
52. Y.-R. Im, B.-J. Lee, Y.J. Oh, J.H. Hong, H.-C. Lee: J. Nucl. Mater., 2004, vol. 32, pp. 33–4010.1016/j.jnucmat.2003.09.003 ↗
53. J.J. Lewandowski, A.W. Thompson: Metall. Trans. A, 1986, vol. 17A, pp. 461–7210.1007/BF02643953 ↗
54. J.J. Lewandowski, C.A. Hippsley, M.B.D. Ellis, J.F. Knott: Acta Metall., 1987, vol. 35, pp. 593–60910.1016/0001-6160(87)90183-0 ↗
55. C.A. Hippsley, J.J. Lewandowski: Metall. Trans. A, 1988, vol. 19, pp. 3005–1110.1007/BF02647727 ↗
56. J.J. Lewandowski, C. Liu, W.H. Hunt Jr.: Mater. Sci. Eng. A, 1989, vol. 107, pp. 241–5510.1016/0921-5093(89)90392-4 ↗
57. P.S. Khadkikar, J.J. Lewandowski, K. Vedula: Metall. Trans. A, 1989, vol. 20, pp. 1247–5510.1007/BF02647407 ↗
58. P.R. Guduru, A.T. Zehnde, A.J. Rosakis, G. Ravichandran: Eng. Fract. Mech., 2001, vol. 68, pp. 1535–5610.1016/S0013-7944(01)00045-5 ↗
59. J.J. Lewandowski, A.L. Greer: Nat. Mater., 2006, vol. 5, pp. 15–1810.1038/nmat1536 ↗
60. T.L. Panontin and S.D. Sheppard: ASTM STP 1296, ASTM, Philadelphia, PA, 1997, pp. 216–42