journal article·2015-06

Investigation of Clusters in Medium Carbon Secondary Hardening Ultra-high-strength Steel After Hardening and Aging Treatments

R. Veerababu, R. Balamuralikrishnan, K. Muraleedharan, M. Srinivas

Publisher page

Abstract

Clusters, containing between 10 and 1000 atoms, have been investigated in a martensitic secondary hardening ultra-high-strength steel austenitized at 1173 K (900 °C) for 1 hour and tempered at either 768 K or 783 K (495 °C or 510 °C) for 4 or 8 hours using 3D atom probe. The presence of clusters was unambiguously established by comparing the observed spatial distribution of the different alloying elements against the corresponding distribution expected for a random solid solution. Maximum separation envelope method has been used for delineating the clusters from the surrounding “matrix.” Statistical analysis was used extensively for size and composition analyses of the clusters. The clusters were found to constitute a significant fraction accounting for between 1.14 and 2.53 vol pct of the microstructure. On the average, the clusters in the 783 K (510 °C) tempered sample were coarser by ~65 pct, with an average diameter of 2.26 nm, relative to the other samples. In all samples, about 85 to 90 pct of the clusters have size less than 2 nm. The percentage frequency histograms for carbon content of the clusters in 768 K and 783 K (495 °C and 510 °C) tempered samples revealed that the distribution shifts toward higher carbon content when the tempering temperature is higher. It is likely that the presence of these clusters exerts considerable influence on the strength and fracture toughness of the steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. G. R. Speich, D. S. Dabkowski, and L. F. Porter: Metall. Trans., 4 (1), 1973, pp. 303-315.10.1007/BF02649630 ↗
2. R. Ayer, and P. M. Machmeier: Metall. Mater. Trans. A, 28 (9), 1996, pp. 2510-2518.10.1007/BF02652345 ↗
3. R. Ayer, and P. M. Machmeier: Metall. Trans. A, 28 (9), 1993, pp. 1943-1955.10.1007/BF02666329 ↗
4. J.M. Dahl and P.M. Novotny: Adv. Mater. Processes, 1999, vol. 155, pp. 23-25.
5. Z. Hu, X. Wu and C. Wang: J. Mater. Sci. Technol., 20 (4), 2004, pp. 425-428.
6. M. Grujicic: CALPHAD, 14 (1), 1990, pp. 49-59.10.1016/0364-5916(90)90039-3 ↗
7. L.E. Iorio, J.L. Maloney, and W.M. Garrison, Jr.: 40th Mechanical Working and Steel Processing Conf. Proc., Vol. XXXVI, ISS-AIME, Warrendale, PA, 1999, pp. 901–20.
8. H. R. Yang, K. B. Lee, and H. Kwon: Metall. Mater. Trans. A, 32 (9), 2001, pp. 2393-2396.10.1007/s11661-001-0213-8 ↗
9. K. S. Cho, J. H. Choi, H. S. Kang, S. H. Kim, K. B. Lee, H. R. Yang, and H. Kwon: Mater. Sci. and Engg A, 527, 2010, pp. 7286-7293.10.1016/j.msea.2010.07.069 ↗
10. J.S. Montgomery and G.B. Olson: Proc. G.R. Speich Symp., G. Krauss and P.E. Repas, eds., ISS, Warrendale, PA, 1992, pp. 177–214.
11. P. M. Machmeier, T. Matuszewski, R. Jones and R. Ayer: J. Mater. Engg Perf., 6 (3), 1997, pp. 279-288.10.1007/s11665-997-0091-3 ↗
12. K. Stiller, L-E. Svensson, P. R. Howell, W. Rong, H-O. Andren, G. L. Dunlop: Acta Mater., 32 (9), 1984, pp. 1458-1468.10.1016/0001-6160(84)90092-0 ↗
13. J. Akre, F. Danoix, H. Leitner and P. Auger: Ultramicroscopy, 109, 2009, pp. 518-523.10.1016/j.ultramic.2008.11.010 ↗
14. R. Veerababu, R. Balamuralikrishnan, K. Muraleedharan, and M. Srinivas: Metall. Mater. Trans. A 39 (7), 2008, pp. 1486-1495.10.1007/s11661-007-9333-0 ↗
15. K.Y. Xie, T.Zheng, J.M.Cairney, H.Kaul, J.G. Williams, F.J. Barbaro, C.R. Killmore, S.P. Ringer: Scr. Mater. 66, 2012, pp. 710-713.10.1016/j.scriptamat.2012.01.029 ↗
16. E.V. Pereloma, I.B. Timokhina, K.F. Russell, M.K. Miller: Scr. Mater. 54, 2006, pp. 471-476.10.1016/j.scriptamat.2005.10.008 ↗
17. Q.D. Liu, W.Q. Liu, and S.J. Zhao: Metall. Mater. Trans. A 42, 2011, pp. 3952-3960.10.1007/s11661-011-0783-z ↗
18. S. L. Shrestha, K. Y. Xie, C. Zhu, S. P. Ringer, C. Killmore, K. Carpenter, H. Kaul, J. G. Williams, J. M. Cairney: Mater. Sci. and Engg A, 568, 2013, p.88-95.10.1016/j.msea.2013.01.021 ↗
19. E. V. Pereloma, A. Shekhter, M. K. Miller and S. P. Ringer: Acta Mater., 52, 2004, pp. 5589-5602.10.1016/j.actamat.2004.08.018 ↗
20. G. Sha, R.K.W. Marceau, X. Gao, B.C. Muddle, S.P. Ringer: Acta Mater., 59, 2011, pp. 1659-1670.10.1016/j.actamat.2010.11.033 ↗
21. G. Sha, H. Moller, W. E. Stumpf, J. H. Xia, G. Govender, S. P. Ringer: Act. Mat. 60, 2012, pp.692-701.10.1016/j.actamat.2011.10.029 ↗
22. N. Stanford, G. Sha, A. La Fontaine, M.R. Barnett, and S.P. Ringer: Metall. Mater. Trans. A 40, 2009, pp. 2480-2487.10.1007/s11661-009-9937-7 ↗
23. Y. Aruga, D. W. Saxey, E. A. Marquis, H. Shishido, Y. Sumino, A. Cerezo, G.D.W. Smith: Metall. Mater. Trans. A, 40A, 2009, pp. 2888-2900.10.1007/s11661-009-0025-9 ↗
24. A. Shekhter, H. I. Aaronson, M. K. Miller, S. P. Ringer, and E. V. Pereloma: Metall. Mater. Trans. A, 35 (3), 2004, pp. 973-983.
25. G.M. Carinci, G.B. Olson, J.A. Liddle, L. Chang, and G.D.W. Smith: in G.B. Olson, M. Azrin, E.S. Wright, eds., Innovations in Ultra High Strength Steel Technology, 34th Sagamore Army Materials Research Conference Proceedings, U.S. Government Printing Office, Washington, DC, 1990, pp. 189-208.
26. M.K. Miller: Atom Probe Tomography, Kluwer Academic/Plenum Press, New York, 2000, pp. 28-34, 158-159.10.1007/978-1-4615-4281-0 ↗
27. R. K. W. Marceau, A. de Vaucorbeil, G. Sha, S. P. Ringer, W. J. Poole: Act. Mat. 61, 2013, pp. 7285-7303.10.1016/j.actamat.2013.08.033 ↗
28. D. Vaumousse, A. Cerezo, and P.J. Warren: Ultramicroscopy, 95, 2003, pp. 215-21.10.1016/S0304-3991(02)00319-4 ↗
29. M.K. Miller, K.F. Russell: J. Nucl. Mater., 371, 2007, pp. 145-60.10.1016/j.jnucmat.2007.05.003 ↗
30. M. K. Miller, K. F. Russell, M. A. Sokolov, and R. K. Nanstad: J. Nucl. Mater., 351, 2008, pp. 248-61.
31. Y. Aruga, H. Nako: Metall. Mater. Trans. A, 43A, 2012, pp. 1102-1108.10.1007/s11661-011-0950-2 ↗
32. I.B. Timokhina, M. Enomoto, M.K. Miller, and E.V. Pereloma: Metall. Mater. Trans. A, 43A, 2012, pp. 2473-2483.10.1007/s11661-012-1106-8 ↗
33. J. M. Hyde, G. Sha, E. A. Marquis, A. Morley, K. B. Wilford, T. J. Williams: Ultramicroscopy,111, 2011, pp. 664-671.10.1016/j.ultramic.2010.12.030 ↗
34. S. L. Semiatin, D. E. Stutz, and T. G. Byrer: J. Heat Treating, 1985, vol. 4, pp. 39-40.10.1007/BF02835488 ↗
35. S. D. Erlach, H. Leitner, M. Bischof, H. Clemens, F. Danoix, D. Lemarchand and I. Siller: Mater. Sci. and Engg A, 429, 2006, pp. 96-106.10.1016/j.msea.2006.05.071 ↗
36. M. D. Mulholland and D. N. Seidman: Act. Mat. 59 (5), 2011, pp.1881-1897.10.1016/j.actamat.2010.11.054 ↗
37. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels Microstructure and Properties, 3rd ed., Elsevier Ltd., Linacre House, Jordan Hill, Oxford, UK, pp. 11, 12, 200.
38. Z. Guo, W. Sha and D. Vaumousse: Acta Mater., 51, 2003, pp. 101-116.10.1016/S1359-6454(02)00353-1 ↗
39. J. M. Hyde, M. G. Burke, R. M. Boothby, and C. A. English: Ultramicroscopy, 109, 2009, pp. 510-517.10.1016/j.ultramic.2008.10.018 ↗
40. R. Schnitzer, M. Schober, S. Zinner, and H. Leitner: Acta Mater., 58, 2010, pp. 3733-3741.10.1016/j.actamat.2010.03.010 ↗
41. M. J. Starink, and S. C. Wang: Acta Mater., 58, 2009, pp. 2376-2389.10.1016/j.actamat.2009.01.021 ↗
42. E. A. Marquis, and J. M. Hyde: Mater. Sci. Eng. R, 69, 2010, pp. 37–62.10.1016/j.mser.2010.05.001 ↗
43. B. Timokhina, P. D. Hodgson, S. P. Ringer, R. K. Zheng and E. V. Pereloma: Mater. Sci. and Tech., 27, No. 1, 2011, pp. 305-309.10.1179/026708309X12506933873107 ↗
44. R. K. W. Marceau, G. Sha, R. N. Lumley, and S. P. Ringer: Acta Mater., 58, 2010, pp. 1795-1805.10.1016/j.actamat.2009.11.021 ↗
45. R. K. W. Marceau, G. Sha, R. Ferragut, A. Dupasquier, and S. P. Ringer: Acta Mater., 58, 2010, pp. 4923-4939.10.1016/j.actamat.2010.05.020 ↗
46. Y. Aruga, D. W. Saxey, E. A. Marquis, A. Cerezo, and G. D. W. Smith: Ultramicroscopy, 11, 2011, pp. 725-729.10.1016/j.ultramic.2011.01.003 ↗
47. T. H. Courtney: Mechanical Behavior of Materials, McGraw-Hill Book Co, Singapore, 2000, p. 200-202.