Effect of Heating Rate on Recrystallization of Twin Roll Cast Aluminum
Source abstract
Abstract
The effect of heating rate on precipitation and recrystallization behavior in twin roll cast (TRC) AA3105 has been investigated by three different means: conventional air furnace, controlled infrared, and lead bath heating. Experimental results showed that as-recrystallized grain size decreased and became more equiaxed as the annealing heating rate increased. These results were explained via time-temperature-transformation (TTT) curves for both dispersoid precipitation and recrystallization. With the faster heating rate, recrystallization could occur before precipitation of Mn present in the unhomogenized TRC samples. At a heating rate of 50 °C/s, the material underwent grain growth after recrystallization at 500 °C. No sign of grain growth was observed in materials annealed with lower heating rates, 3 °C/s, 0.5 °C/s, and 0.01 °C/s, due to greater dispersoid precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. H. Bessemer: British patent 11,317
2. M. Yun, S. Lockyer, J.D. Hunt: Mater. Sci. Eng. A, 2000, vol. 280, pp. 116–2310.1016/S0921-5093(99)00676-0 ↗
3. R. Cook, P.G. Grocok, P.M. Thomas, D.V. Edmonds, J.D. Hunt: J. Mater. Proc. Technol., 1995, vol. 55, pp. 76–8410.1016/0924-0136(95)01788-7 ↗
4. N. Sun, B.R. Patterson, J.P. Suni, E.A. Simielli, H. Weiland, L.F. Allard: TMS Lett., 2005, vol. 2, pp. 33–34
5. N. Sun, B.R. Patterson, J.P. Suni, E.A. Simielli, H. Weiland, L.F. Allard: Mater. Sci. Eng. A, 2006, vol. 416, pp. 232–3910.1016/j.msea.2005.10.018 ↗
6. B.A. Parker: in Aluminum Alloys—Contemporary Research and Applications, A.K. Vasudevan, R.D. Doherty, eds., Academic Press, New York, NY, 1989, pp. 539–6110.1016/B978-0-12-341831-9.50025-5 ↗
7. W.F. Hosford: in Formability: Analysis, Modeling and Experimentation, S.S. Hecker, A.K. Ghosh, H.L. Gegel, eds., TMS, Warrendale PA, 1978, pp. 78–95
8. G.H. LeRoy, J.D. Embury: in Formability: Analysis, Modeling and Experimentation, S.S. Hecker, A.K. Ghosh, H.L. Gegel, eds., TMS, Warrendale, PA, 1978, pp. 183–207
9. B.R. Patterson, N. Sun, J.P. Suni, E.A. Simielli, H. Weiland, L.F. Allard: TMS Lett., 2004, vol. 8, pp. 173–74
10. N. Sun, B.R. Patterson, J.P. Suni, E.A. Simielli, H. Weiland, P. Kadolkar, C.A. Blue, G.B. Thompson: Aluminum Wrought Products for Automotive, Packaging, and Other Applications—The James Morris Honorary Symp., TMS, Warrendale, PA, 2006, pp. 119–24
11. C.A. Blue, V.K. Sikka, R.A. Blue, R.Y. Lin: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1–8
12. N. Sun: Ph.D. Thesis, University of Alabama at Birmingham, Birmingham, AL, 2006
13. R.D. Doherty, J.W. Martin: J. Inst. Met., 1962, vol. 91, pp. 332–38
14. E. Nes: Acta Metall., 1976, vol. 24, pp. 391–9810.1016/0001-6160(76)90059-6 ↗
15. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st ed., Pergamon, Oxford, United Kingdom, 1995
16. P.R. Mould, P. Cotterill: J. Mater. Sci., 1967, vol. 2, pp. 241–5510.1007/BF00555381 ↗
17. U. Koster: Met. Sci., 1974, vol. 8, pp. 151–6010.1179/msc.1974.8.1.151 ↗
18. J.P. Suni, R.D. Doherty, P.A. Hollinshead, T.N. Rouns, R.T. Shuey: Aluminum Alloys, 1998, vol. 2, pp. 1203–11
19. R.D. Doherty: Drexel University, Philadelphia, PA, unpublished research, 1995
20. E. Nes, N. Ryum, O. Hunderi: Acta Metall., 1985, vol. 33, pp. 11–2210.1016/0001-6160(85)90214-7 ↗