journal article·2001-11

Microstructural investigation on the precipitation of α″ nitrides and α″ → γ′ nitride transformation in ion-nitrided pure iron

Z. Q. Liu, Y. X. Chen, D. X. Li, Z. K. Hei, H. Hashimoto

Publisher page

Abstract

The precipitated characteristics of α″-Fe16N2 nitrides in the diffusion layer of ion-nitrided pure iron were investigated with transmission electron microscopy (TEM) and high-resolution electron microscopy (HREM). Three sets of α″ nitrides, whose habit planes are (100)α,(010)α,(001)α, respectively, do not precipitate simultaneously from the diffusion layer, which is different from the normal homogeneous precipitation in Fe-N alloys. Unlike the typical disc-shaped morphology reported widely, the α″ nitrides in the diffusion layer appear as ribbonlike slices. They grow on {001}α matrix planes with a parallel orientation relationship, and the direction of their length is parallel to the α direction. The interface between the α″ nitride and α matrix and a 7 deg [111]/(112) low-angle-tilt grain boundary in the α″ nitride were examined with HREM. The distributions of dislocations at the interface and the grain boundary were investigated. During microstructural examination, it was observed that a γ′-Fe4N nitride could grow on an α″ nitride directly. The orientation relationship during the α″ → γ′ nitride transformation was determined as to be (001)γ//(110)α,[110]γ//[111]α.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. X.L. Lu, L. Wang, Z.W. Yu, and Z.K. Hei: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1347–52.
2. X.L. Xu, L. Wang, Z.W. Yu, and Z.K. Hei: Acta Metall. Sinica, 1998, vol. 11, pp. 183–89.
3. K.H. Jack: Proc. R. Soc. A, 1951, vol. 208, pp. 216–24.10.1098/rspa.1951.0155 ↗
4. Z.Q. Liu, D.X. Li, X.L. Xu, L. Wang, and Z.K. Hei: J. Mater. Sci. Technol., 2000, vol. 16, pp. 362–66.
5. H. Tanaka, S. Nagakura, Y. Nakamura, and Y. Hirotsu: Acta Mater., 1997, vol. 45, pp. 1401–10.10.1016/S1359-6454(96)00270-4 ↗
6. J.H. Driver and J.M. Papazian: Acta Metall., 1973, vol. 21, pp. 1139–49.10.1016/0001-6160(73)90030-8 ↗
7. R. Wagner and S.S. Brenner: Acta Metall., 1978, vol. 26, pp. 197–202.10.1016/0001-6160(78)90118-9 ↗
8. T.K. Kim and M. Takahashi: Appl. Phys. Lett., 1972, vol. 20, pp. 492–94.10.1063/1.1654030 ↗
9. D.C. Sun, E.Y. Jiang, and Duoqing Sun: Thin Solid Films, 1997, vol. 298, pp. 116–21.10.1016/S0040-6090(96)09059-1 ↗
10. M.J. Van Genderen, A. Böttger, and E.J. Mittemeijer: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 63–77.10.1007/s11661-997-0083-9 ↗
11. A. Van Gent, F.C. Van Doorn, and E.J. Mittemeijer: Metall. Trans. A, 1985, vol. 16A, pp. 1371–84.10.1007/BF02658670 ↗
12. P. Ferguson and K.H. Jack: Scripta Metall., 1984, vol. 18, pp. 1189–94.10.1016/0036-9748(84)90103-0 ↗
13. P. Rochegude and J. Foct: Phys. Status Solid A, 1985, vol. 88, pp. 137–42.10.1002/pssa.2210880114 ↗
14. X.H. Bao, R.M. Metzger, and M. Carbucicchio: J. Appl. Phys., 1994, vol. 75, pp. 5870–72.10.1063/1.356988 ↗
15. D.C. Sun, C. Lin, and E.Y. Jiang: J. Phys. Condens. Matter., 1995, vol. 7, pp. 3667–74.10.1088/0953-8984/7/18/028 ↗
16. H. Shinno, M. Uehara, and K. Saito: J. Mater. Sci., 1997, vol. 32, pp. 2255–61.10.1023/A:1018568015538 ↗
17. B.A. Fuller and R.D. Garwood: J. Iron Steel Inst., 1972, vol. 210, pp. 206–208.
18. Robert M. Metzger and Xiaohua Bao: J. Appl. Phys., 1994, vol. 76, pp. 6626–31.10.1063/1.358426 ↗
19. J.M.D. Coey: J. Appl. Phys., 1994, vol. 76, pp. 6632–36.10.1063/1.358156 ↗
20. H. Takahashi, K. Mitsuoka, M. Komuro, and Y. Sugita: J. Appl. Phys., 1993, vol. 73, pp. 6060–62.10.1063/1.353469 ↗
21. P. Hayes, W. Roberts, and P. Grieveson: Acta Metall., 1975, vol. 23, pp. 849–54.10.1016/0001-6160(75)90201-1 ↗
22. P.A. Beaven and E.P. Butler: Acta Metall., 1980, vol. 28, pp. 1349–59.10.1016/0001-6160(80)90004-8 ↗
23. P. Ferguson and K.H. Jack: Phil. Mag. A, 1984, vol. 50, pp. 221–32.10.1080/01418618408244224 ↗
24. G. Sauthoff and W. Pitsch: Phil. Mag. B, 1987, vol. 56, pp. 471–83.10.1080/13642818708221333 ↗
25. Y. Watanabe, H. Nozaki, M. Kato, and A. Sato: Acta Metall. Mater., 1991, vol. 39, pp. 3161–66.10.1016/0956-7151(91)90050-B ↗
26. P. Ferguson and K.H. Jack: Phil. Mag. A, 1985, vol. 52, pp. 509–23.10.1080/01418618508237643 ↗
27. P. Ferguson, U. Dahmen, and K.H. Westmacott: Scripta Metall., 1984, vol. 18, pp. 57–60.10.1016/0036-9748(84)90089-9 ↗
28. G. Hinojosa, J. Oseguera, O. Salas, and P.S. Schabes-Retchkiman: Scripta Mater., 1996, vol. 34, pp. 141–44.10.1016/1359-6462(95)00506-4 ↗
29. U. Dahmen, P. Ferguson, and K.H. Westmacott: Acta Metall., 1987, vol. 35, pp. 1037–46.10.1016/0001-6160(87)90051-4 ↗
30. M. Hong, D.E. Wedge, and J.W. Morris: Acta Metall., 1984, vol. 32, pp. 279–88.10.1016/0001-6160(84)90056-7 ↗
31. M. Shamsuzzoha, D.J. Smith, and P.A. Deymier: Scripta Metall., 1990, vol. 24, pp. 1611–14.10.1016/0956-716X(90)90441-I ↗
32. Y. Gao, K.L. Merkle, G. Bai, H.L.M. Chang, and D.J. Lam: Ultramicroscopy, 1991, vol. 37, pp. 326–30.10.1016/0304-3991(91)90030-A ↗