Dynamic Effects in Hopkinson Bar Four-Point Bend Fracture
Source abstract
Abstract
Hopkinson bar techniques have played an important role in the study of high-rate deformation and fracture behavior of materials. In the current work, a split Hopkinson pressure bar was developed for dynamic four-point bend fracture testing, referred to as a “two-bar (incident and transmitted bars)/four-point” (2-bar/4-pt) bend test. To further understand some fundamental issues regarding stress wave propagation in this 2-bar/4-pt bend testing system, dynamic fracture tests were performed in pulse-shaped and unshaped pulse testing conditions. The effect of the pulse shaper on the incident pulse characteristics (rise time and duration), specimen’s dynamic response (load and loading point displacement), crack initiation time and stress-state equilibrium were investigated experimentally in the current work. The present results show that stress state equilibrium can be achieved prior to fracture initiation in notched and precracked specimens. In the pulse-shaped bending test, the specimen is more likely to attain stress-state equilibrium than in an unshaped incident pulse test. The crack initiation time was extended and the time required for attaining stress equilibrium was reduced by pulse shaping due to the tailored incident pulse having a longer rise time, which ensures that stress equilibrium is achieved prior to crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. L.S. Costin, J. Duffy, L.B. Freund: ASTM STP627, ASTM, Philadelphia, PA, 1977, pp. 301–18
2. X. Yuanming, R. Shiguo, Y. Baochang: Eng. Fract. Mech., 1994, vol. 48, pp. 17–2410.1016/0013-7944(94)90139-2 ↗
3. D.M. Owen et al.: Int. J. Fracture, 1998, vol. 90, pp. 153–7410.1023/A:1007439301360 ↗
4. S. Rizal, H. Homma: Int. J. Impact Eng., 2000, vol. 24, pp. 69–8310.1016/S0734-743X(99)00029-9 ↗
5. G. Weisbrod, D. Rittel: Int. J. Fract., 2000, vol. 104, pp. 89–10310.1023/A:1007673528573 ↗
6. H. Stroppe, R. Clos, U. Schreppel: Nucl. Eng. Design, 1992, vol. 137, pp. 315–2110.1016/0029-5493(92)90254-S ↗
7. V.K. Srivastava, K. Maile: Compos. Sci. Technol., 2004, vol. 64, pp. 1209–1710.1016/j.compscitech.2003.09.025 ↗
8. A.G. Dutton, R.A.W. Mines: Int. J. Fract., 1991, vol. 51, pp. 87–20610.1007/BF00045806 ↗
9. L. Rubio, J. Ferandez-Saez, C. Navarro: Exper. Mech., 2002, vol. 43, pp. 379–8610.1007/BF02411342 ↗
10. C. Bacon, J. Farm, J.L. Lataillade: Exper. Mech., 1994, vol. 34, pp. 217–2210.1007/BF02319758 ↗
11. M.A. Irfan, V. Prakash: Int. J. Solids Struct., 2000, vol. 37, pp. 4477–450710.1016/S0020-7683(99)00195-X ↗
12. R.P. Singh, V. Parameswaran: Opt. Lasers Eng., 2003, 40, pp. 289–30610.1016/S0143-8166(02)00089-1 ↗
13. X.-F. Wu, Y.A. Dzenis: Polymer Compos., 2005, vol. 26, pp. 165–8010.1002/pc.20093 ↗
14. K. Tanaka, T. Kagatsume: Bull. JSME, 1980, vol. 23, p. 173610.1299/jsme1958.23.1736 ↗
15. S.W. Park, M. Zhou: Exper. Mech., 1999, vol. 39, pp. 287–9410.1007/BF02329807 ↗
16. S.N. Nwosu, D. Hui, P.K. Dutta: Compos.: Part B, 2003, vol. 34, pp. 303–1610.1016/S1359-8368(02)00039-2 ↗
17. F. Jiang, K.S. Vecchio, A. Rohatgi: Int. J. Fract., 2004, vol. 126, pp. 143–6410.1023/B:FRAC.0000026363.05467.2b ↗
18. F. Zhou, J.-F. Molinari, Y. Li: Eng. Fract. Mech., 2004, vol. 71, pp. 1357–7810.1016/S0013-7944(03)00168-1 ↗
19. T. Weerasooriya, P. Moy, D. Casem, M. Cheng, W. Chen: J. Am. Ceram. Soc., 2006, vol. 89, pp. 990–9510.1111/j.1551-2916.2005.00896.x ↗
20. J. Klepaczko: in Mechanical Properties at High Rates of Strain, J. Harding, ed., The Institute of Physics, Bristol, United Kingdom, 1979, pp. 201–14
21. J.R. Klepaczko: J. Eng. Mater. Technol., 1982, vol. 104, pp. 29–3510.1115/1.3225032 ↗
22. R.S.J. Corran, F.G. Benitez, J. Harding, C. Ruiz, and T. Nojima: in Application of Fracture Mechanics to Materials and Structures, G.C. Sih, E. Sommer, and W. Dahl, eds., Martinus Nijhoff Publishers, The Hague/Boston/Lancaster, 1983, pp. 443–5410.1007/978-94-009-6146-3_27 ↗
23. R.S.J. Corran, F.G. Benitez, J. Harding, and C. Ruiz: in Mechanical Properties at High Rates of Strain, J. Harding, ed., The Institute of Physics, Bristol, United Kingdom, 1984, pp. 253–60
24. M.N. Bassim, M.R. Bayoumi, T.R. Hsu, and J.R. Matthews.: J. Test. Eval., 1986, vol. 14, pp. 229–3510.1520/JTE10334J ↗
25. C.T. Sun and C. Han: Compos.: Part B, 2004, vol. 35, pp. 647–5510.1016/j.compositesb.2004.04.006 ↗
26. Z.X. Zhang, S.Q. Kou, J. Yu, Y. Yu, L.G. Jiang, P.-A Lindqvist: Int. J. Rock Mech. Min. Sci., 1999, vol. 36, pp. 597–61110.1016/S0148-9062(99)00031-5 ↗
27. Z.X. Zhang, J. Yu, S.Q. Kou, P.-A. Lindqvist: Int. J. Rock Mech. Min. Sci., 2001, vol. 38, pp. 211–2510.1016/S1365-1609(00)00071-X ↗
28. H. Maigre, D. Rittel: Int. J. Fract., 1995, vol. 73, pp. 67–7910.1007/BF00039852 ↗
29. K. Kishida, T. Yokoyama, and M. Nakano: in Mechanical Properties at High Rates of Strain, J. Harding, ed., The Institute of Physics, Bristol and London, 1984, pp. 221–28
30. T. Yokoyama: J. Press. Vess. Technol., 1993, vol. 115, pp. 389–9710.1115/1.2929546 ↗
31. M. Todo, K. Takahashi: Eng. Sci. Rep., Kyushu Univ., 1998, vol. 20, pp. 267–73
32. T. Kusaka, T. Kurokawa, M. Hojo, S. Ochiai: Key Eng. Mater., 1998, vols. 141–143, pp. 477–98
33. S. Suresh, C.F. Shih, A. Morrone, N.P. O’Dowd: J. Am. Ceram. Soc., 1990, vol. 73, pp. 1257–6710.1111/j.1151-2916.1990.tb05189.x ↗
34. J. Zhang, J.J. Lewandowski: J. Mater. Sci., 1997, vol. 32, pp. 3851–5610.1023/A:1018692110821 ↗
35. R.H. Martin, B.D. Davidson: Plastic, Rubber Compos., 1999, vol. 28, pp. 401–0610.1179/146580199101540565 ↗
36. Ö. Ünal, V. Dayal: Mater. Sci. Eng. A, 2003, vol. 340, pp. 170–7410.1016/S0921-5093(02)00168-5 ↗
37. Z. Huang, Z. Suo, G. Xu, J. He, J.H. Pre´vost, N. Sukumar: Eng. Fract. Mech., 2005, vol. 72, pp. 2584–260110.1016/j.engfracmech.2005.04.002 ↗
38. W. Mekky, P.S. Nicholson: Eng. Fract. Mech., 2006, vol. 73, pp. 571–8210.1016/j.engfracmech.2005.09.005 ↗
39. R.K. Nalla, J.H. Kiney, R.O. Ritchie: Nat. Mater., 2003, vol. 2, pp. 164–6810.1038/nmat832 ↗
40. Y.-R. Im, B.-J. Lee, Y.J. Oh, J.H. Hong, H.-C. Lee: J. Nucl. Mater., 2004, vol. 324, pp. 33–4010.1016/j.jnucmat.2003.09.003 ↗
41. S. Nemat-Nasser, J.B. Isaacs, J.E. Starrett: Proc. R. Soc. London, A, 1991, vol. 435, pp. 371–9110.1098/rspa.1991.0150 ↗
42. H.E. Boyer and T.L. Gall: Metals Handbook, 9th ed., ASM, Materials Park, OH, pp. 190–207; Ceram. Soc., 1994, vol. 77, pp. 263–67
43. L. Ninan, J. Tsai, C.T. Sun: Int. J. Impact Eng., 2001, vol. 25, pp. 291–31310.1016/S0734-743X(00)00039-7 ↗