Microstructure and Mechanical Properties of Dissimilar Welded Ti3Al/Ni-Based Superalloy Joint Using a Ni-Cu Filler Alloy
Source abstract
Abstract
Dissimilar welding of a Ti3Al-based alloy and a Ni-based superalloy (Inconel 718) was successfully carried out using gas tungsten arc welding technology in this study. With a Ni-Cu alloy as filler material, sound joints have been obtained. The microstructure evolution along the cross section of the dissimilar joint has been revealed based on the results of scanning electron microscopy and X-ray energy dispersive spectroscopy as well as X-ray diffractometer. It is found that the weld/Ti3Al interface is composed of Ti2AlNb matrix dissolved with Ni and Cu, Al(Cu, Ni)2Ti, (Cu, Ni)2Ti, (Nb, Ti) solid solution, and so on. The weld and In718/weld interface mainly consist of (Cu, Ni) solid solutions. The weld exhibits higher microhardness than the two base materials. The average room-temperature tensile strength of the joints reaches 242 MPa and up to 73.6 pct of the value can be maintained at 873 K (600 °C). The brittle intermetallic phase of Ti2AlNb matrix dissolved with Ni and Cu at the weld/Ti3Al interface is the weak link of the joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S. Djanarthany, J. C. Viala, J. Bouix: Mater. Chem. Phys., 2001, vol. 72, pp. 301-319.10.1016/S0254-0584(01)00328-5 ↗
2. S. J. Yang, S. W. Nam, M. Hagiwara: Intermetallics, 2004, vol. 12, pp. 261-274.10.1016/j.intermet.2003.10.009 ↗
3. H. P. Xiong, J. Y. Mao, B. Q. Chen, Q. Wang, S. B. Wu, X. H. Li: J. Mater. Eng., 2013, vol. 10, pp. 1-12. (in Chinese).
4. S. A. David, J. A. Horton, G. M. Goodwin: Weld J., 1990, vol. 69, pp. 133-140.
5. M. J. Cieslak, T. J. Headley, W. A. Baeslack III: Metall. Trans. A, 1990, vol. 21, pp. 1273-86.10.1007/BF02698255 ↗
6. B. Liu, Y. Wu, Z. X. Zhou, Y. X. Cui, D. H. Yang: Mater. Sci. Tech., 1997, vol. 5, pp. 45.10.1016/S0924-0136(96)00037-4 ↗
7. A. P. Wu, G. S. Zou, J. L. Ren, H. J. Zhang, G. Q. Wang, X. Liu, M. R. Xie: Intermetallics, 2002, vol. 10, pp. 647-652.10.1016/S0966-9795(02)00049-3 ↗
8. Z. L. Lei, Z. J. Dong, Y. B. Chen, J. Zhang, R. C. Zhu: Mater. Des., 2013, vol. 46, pp. 151-156.10.1016/j.matdes.2012.10.022 ↗
9. H. T. Zhang, P. He, J. C. Feng, H. Q. Wu: Mater. Sci. Eng. A, 2006, vol. 425, pp. 255-259.10.1016/j.msea.2006.03.048 ↗
10. L. J. Tan, Z. K. Yao, W. Zhou, H. Z. Guo, Y. Zhao: Aerosp. Sci. Technol., 2010 vol. 14, pp. 302-306.10.1016/j.ast.2010.02.002 ↗
11. Z. Sun, R. Karppi: J. Mater. Process Tech., 1996, vol. 59, pp. 257-267.10.1016/0924-0136(95)02150-7 ↗
12. S. Chatterjee, T. A. Abinandanan, K. Chattopadhyay: J. Mater. Sci., 2006, vol. 41, pp. 643-652.10.1007/s10853-006-6480-4 ↗
13. M. Velu, S. Bhat: Mater. Des., 2013, vol. 47, pp. 793-809.10.1016/j.matdes.2012.12.073 ↗
14. A. R. Miedema, F. R. D. E. Boer, R. Boom, J. W. F. Dorleijn: CALPHAD., 1977, vol. 1, pp. 353-359.10.1016/0364-5916(77)90011-6 ↗
15. J. D. Keyzer, G. Cacciamani, N. Dupin, P. Wollants: CALPHAD., 2009, vol. 33, pp. 109.10.1016/j.calphad.2008.10.003 ↗
16. H. M. Li, D. Q. Sun, X. Y. Gu, P. Dong, Z. P. Lv: Mater. Des., 2013, vol. 50, pp. 342-350.10.1016/j.matdes.2013.03.014 ↗
17. J. X. Cao, F. Bai, Z. X. Li: Mater. Sci. Eng. A, 2006, vol. 424, pp. 47-52.10.1016/j.msea.2006.02.040 ↗
18. P. Villars, A. Prince, H. Okamoto. Handbook of Ternary Alloy Phase Diagrams. Materials Park, OH: ASM Inter-national, 1995.
19. P. He, J. C. Feng, H. Zhou: Mater. Charact., 2005, vol. 54, pp. 338-346.10.1016/j.matchar.2004.12.003 ↗
20. S. J. Lee, S. K. Wu, R. Y. Lin: Acta. Mater., 1998, vol. 46, pp. 1283-1295.10.1016/S1359-6454(97)00298-X ↗
21. R. K. Shiue, S. K. Wu, S. Y. Chen: Acta. Mater., 2003, vol. 51, pp. 1991-2004.10.1016/S1359-6454(02)00606-7 ↗
22. T. Tetsui: Intermetallics, 2001, vol. 9, pp. 253-60.10.1016/S0966-9795(00)00129-1 ↗
23. M. Kazunari, I. Yuki, M. Hirotaka, M. Hiroyuki: Scripta. Mater., 2013, vol. 68, pp. 777-780.10.1016/j.scriptamat.2012.12.027 ↗
24. M. Emamy, N. Nemati, A. Heidarzadeh: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2998-3004.10.1016/j.msea.2010.01.063 ↗
25. B. Q. Chen, H. P. Xiong, S. Q. Guo, X. J. Zhang, B. B. Sun, S. Y. Tang: J. Mater. Eng., 2014, vol. 4, pp. 13-17. (in Chinese).
26. B. Q. Chen, H. P. Xiong, B. B. Sun, S. Y. Tang, S. Q. Guo, X. J. Zhang: J. Mater. Sci. Technol., 2014, vol. 30, pp. 715-21.10.1016/j.jmst.2014.06.004 ↗
27. B.Q. Chen, H.P. Xiong, B.B. Sun, S.Y. Tang, B.R. Du, and N. Li: Prog. Nat. Sci., 2014, vol. 24, pp. 313–20.10.1016/j.pnsc.2014.06.003 ↗