journal article·2014-11Open access

Laser Quenching of Ionic Nitrided Steel: Effect of Process Parameters on Microstructure and Optimization

E. Colombini, R. Sola, G. Parigi, P. Veronesi, G. Poli

Abstract

The surface properties of 40CrMnMo7 steel have been increased by ionic nitriding thermo chemical treatment followed by laser quenching. Nitriding treatment increases the wear resistance and decreases the wear coefficient, guaranteeing an uniform, though shallow, hardening depth. Combining nitriding with laser quenching has been shown to increase of the hardening depth, while retaining the advantages obtained by the first treatment. In this work the effect of laser quenching parameters on microstructure and mechanical properties of 40CrMnMo7 steel have been investigated and predictive models developed suitable for further optimization of the process. DoE has been exploited to reduce the number of experiments and for evaluating by statistic methods the optimized process parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S.N. Aqida, S. Naher, M. Maurel, and D. Brabazon: 25th Int. Manuf. Conf., 3–5 Sept 2008, Dublin, Ireland.
2. O.V. Chudina, T.M Borovskaya, Metal Science and Heat Treatment, 39 (7), (1997), pp. 285-287.10.1007/BF02467123 ↗
3. R. Rowshan: PhD Thesis, Miskolc University, Miskolc, Hungaria, 2007.
4. S. Santhanakrishnan and N.B. Dahotre: in ASM Handbook, vol. 4A: Steel Heat Treating Fundamentals and Processes, J. Dossett and G. E. Totten, eds., American Society for Materials (ASM) International, Materials Park, OH, 2013, pp. 1–26.
5. L. Qingbin, L. Hong, Journal of Materials Processing Technology 88, (1999), pp. 77–82.10.1016/S0924-0136(98)00381-1 ↗
6. A. Runiewicz, W. Dudzinski, A. Fischer, 43 (7), (2006), pp. 364-372.
7. H. Ki, S. So, Optics & Laser Technology 44, (2012), pp. 2106–2114.10.1016/j.optlastec.2012.03.018 ↗
8. H.J. Shin, Y.T. Yoo, Journal of Materials Processing Technology, 201, (2008), pp. 342–347.10.1016/j.jmatprotec.2007.11.232 ↗
9. O. Sandven, Laser Surface Transformation Hardening, Metals Handbook, vol. 4, 9th Ed., Surface Engineering, ASM International, Materials Park, OH, pp. 507–17.
10. M.B. Karamis, B.S. Yilbas Erciyes, Surf. Coat. Technol. 45, (1991), pp. 399-402.10.1016/0257-8972(91)90248-U ↗
11. J. DeKock: Laser Heat Treating, Industrial Heating, Laser Machining Inc, 4 2001, pp. 1–4.
12. S. Barella, M. Boniardi, F. D’Errico, A. Sironi, La Metallurgia Italiana,4, (2007), pp. 39-45.
13. G. Poli, P. Veronesi, R. Giovanardi, R. Sola, A. Zanotti, S. Masini, La Metallurgia Italiana, 5 (2008), pp.11-16.
14. O. V. Chudina, L. G. Petrovand T. M. Borovskay, Metal Science and Heat Treatment, 44, (2002), pp-154-159.10.1023/A:1019686507914 ↗
15. Technical SheetLucefin Group, Gruppo Lucefin S.p.A. Via Ruc, 30, I-25040 Esine (BS, Italy), 2012. http://www.lucefin.com/wp-content/files_mf/1.231140crmnmo727.pdf.
16. J.C. Ascough II, E.M. Fathelrahman, and D. L. Hoag, J. Air Soil Water Res., 2013, 6 73–89.10.4137/ASWR.S11697 ↗
17. P.D. Babu, G. Buvanashekaran, K.R. Balasubramanian, Transactions of the Canadian Society for Mechanical Engineering, 36 (3) (2012), pp. 241-258.10.1139/tcsme-2012-0018 ↗
18. P.A. Molian, Materials Science and Engineering, 51 (1981), pp. 253-260.10.1016/0025-5416(81)90201-9 ↗
19. A.F. Edan: Thesis Submitted to Department of Laser and Opto-Electronic Engineering of the University of Technology in Partial Fulfillment of the Requirements for the Degree of Master of Science in Laser Engineering, 2008.
20. J. De Kock: Laser Heat Treating, Industrial Heating, Laser Machining Inc, 2001, pp. 1–4.