Study of Molten Salt Corrosion of High Velocity Oxy-Fuel Sprayed Cermet and Nickel-Based Coatings at 900 °C
Source abstract
Abstract
Samples of Cr3C2-NiCr cermet and NiCrBSi coatings formed by the high velocity oxy-fuel (HVOF) process on Superni 718 superalloy have been corroded in the Na2SO4-V2O5 molten salt environment at 900 °C under cyclic conditions. The hot corrosion behavior of the coatings has been investigated by means of thermogravimetric analysis, X-ray diffraction, scanning electron microscopy/energy dispersive spectroscopy, and electron probe microanalyzer techniques. Efforts have been made to formulate the mode of corrosion attack. Both the coatings protected the substrate superalloy Superni 718 completely. While protecting the superalloy, the Cr3C2-NiCr cermet coating partially oxidized along the splat boundaries up to the coating substrate interface, whereas only the upper part of the coating, to about 100 μm from the surface, oxidized in the case of the NiCrBSi coating. The hot corrosion resistance of both the coatings has been attributed to the formation of protective oxides of chromium/silicon at the surface and at the splat boundaries of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. D.Y. Kim and M.S. Han: in C.C. Berndt (ed) Thermal Spray: Practical Solutions for Engineering Problems. ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 123–28
2. B.Q. Wang: in T.S. Sudarshan, et al., (eds) Surface Modifications Technologies XI. The Institute of Materials, Paris, 1997, pp. 458–67
3. Corchia M., Delogu P., Nenci F., Belmondo A., Corcoruto S., Stabielli W. (1987) Wear 119, p. 13710.1016/0043-1648(87)90105-0 ↗
4. J.H. Tylezak and A. Oregon: Friction, Lubrication and Wear Technology. vol. 18, ASM Handbook, ASM INTERNATIONAL, Materials Park, OH, 1995, p. 184
5. J.M. Guilemany, J. Fernandez, and J. Delgado: Proc. United Thermal Spray Conf., Düsseldorf, 1997, pp. 474–78
6. Miguel J.M., Guilemany J.M., Vizcaino S. (2003) Tribol Int vol. 36 (3), pp. 181–8710.1016/S0301-679X(02)00144-5 ↗
7. Suegama P.H., Fugivara C.S., Benedetti A.V., Fernandez J., Delgado J., Guilemany J.M. (2002) J Appl Chem vol. 32, pp. 1287–95
8. S. Zimmermann and H. Kreye: Proc. 9th National Therm. Spray Conf., ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 147–5210.31399/asm.cp.itsc1996p0147 ↗
9. Fedrizzi L., Rossi S., Cristel R., Bonora P.L. (2004) Electrochim. Acta vol. 49, pp. 2803–1410.1016/j.electacta.2004.01.043 ↗
10. Otsubo F., Era H., Kishitake K. (2000) J Thermal Spray Technol vol. 91, pp. 107–1310.1361/105996300770350131 ↗
11. Murthy J.K.N., Venkataraman B. (2004) Surf Coating Technol vol. 200 (8), pp. 2642–5210.1016/j.surfcoat.2004.10.136 ↗
12. Guilemany J.M., Espallargas N., Suegama P.H., Benedetti A.V., Fernandez J. (2005) J Thermal Spray Technol vol. 14 (3), pp. 335–4110.1361/105996305X59350 ↗
13. P. Vuoristo, K. Niemi, A. Makela, and T. Mantyla: Proc. 7th National Thermal Spray Conf., Boston, MA, June 20–24, 1994, pp. 121–26
14. Eliaz N., Shemesh G., Latanision R.M. (2002) Eng. Failure Anal vol. 9, pp. 31–4310.1016/S1350-6307(00)00035-2 ↗
15. Rapp R.A. (1986) Corrosion vol. 42 (10), pp. 568–7710.5006/1.3583026 ↗
16. S.N. Tiwari: Ph.D. Thesis, IIT Roorkee, Roorkee, India, 1997
17. Wood G.C., Hodgkiess T. (1966) Nature vol. 211, pp. 1358–6110.1038/2111358a0 ↗
18. Ul-Hamid A. (2003) Mater Chem Phys vol. 80, pp. 135–4210.1016/S0254-0584(02)00448-0 ↗
19. Sadique S.E., Mollah A.H., Islam M.S., Ali M.M., Megat M.H.H., Basri S. (2000) Oxid Met vol. 54 (5–6), pp. 385–40010.1023/A:1004682316408 ↗
20. Sidhu T.S., S. Prakash, and Agrawal R.D: J. Mater. Eng. Performance, ASM INTERNATIONAL, Materials Park, OH, 2006, vol. 15 (1), pp. 122–29
21. Sidhu T.S., Prakash S., Agrawal R.D. (2006) J. Mater. Eng. Performance vol. 15 (1), pp. 130–3810.1361/105994906X83411 ↗
22. Stroosnijder M.F., Mevrel R., Bennet M.J. (1994) Mater High Temp vol. 12 (1), pp. 53–6610.1080/09603409.1994.11689470 ↗
23. Stott F.H. (1989) Mater Sci Technol vol. 5, pp. 734–4010.1179/mst.1989.5.8.734 ↗
24. U.K. Chatterjee, S.K. Bose, and S.K. Roy: Environmental Degradation of Metals, Marcel Dekker, New York, NY, 2000.10.1201/9781482292244 ↗
25. Wang Q.M., Wu Y.N., Ke P.L., Cao H.T., Gong J., Sun C., Wen L.S. (2004) Surf Coating Technol vol. 86 (3), pp. 389–9710.1016/j.surfcoat.2003.12.020 ↗