journal article·2015-08Open access

The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels

B. Hu, G. Trotter, Ian Baker, M. K. Miller, L. Yao, S. Chen, Z. Cai

Abstract

In order to achieve energy conversion efficiencies of >50 pct for steam turbines/boilers in power generation systems, materials are required that are both strong and corrosion-resistant at >973 K (700 °C), and economically viable. Austenitic steels strengthened with Laves phase, NiAl and Ni3Al precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The microstructure and microchemistry of recently developed alumina-forming austenitic stainless steels have been characterized by scanning electron microscopy, transmission electron microscopy, and synchrotron X-ray diffraction. Different thermo-mechanical treatments were performed on these steels to improve their mechanical performance. These reduced the grain size significantly to the nanoscale (~100 nm) and the room temperature yield strength to above 1000 MPa. A solutionizing anneal at 1473 K (1200 °C) was found to be effective for uniformly redistributing the Laves phase precipitates that form upon casting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. R. Viswanathan, W. Bakker, Journal of Materials Engineering and Performance, 10 (2001) 81-95.10.1361/105994901770345394 ↗
2. R. Viswanathan, W. Bakker, Journal of Materials Engineering and Performance, 10 (2001) 96-101.10.1361/105994901770345402 ↗
3. Y. Yamamoto, M.P. Brady, Z.P. Lu, P.J. Maziasz, C.T. Liu, B.A. Pint, K.L. More, H.M. Meyer, E.A. Payzant, Science, 316 (2007) 433-436.10.1126/science.1137711 ↗
4. V. Ramakrishnan, J. McGurty, N. Jayaraman, Oxidation of Metals, 30 (1988) 185-200.10.1007/BF00666596 ↗
5. D.V.V. Satyanarayana, G. Malakondaiah, D.S. Sarma, Materials Science and Engineering: A, 323 (2002) 119-128.10.1016/S0921-5093(01)01342-9 ↗
6. R. Peraldi, B.A. Pint, P.J. Maziasz, Materials Science Forum, 461 (2004) 815-822.
7. R. Viswanathan, K. Coleman, U. Rao, International Journal of Pressure Vessels and Piping, 83 (2006) 778-783.10.1016/j.ijpvp.2006.08.006 ↗
8. V. Viswanathan, R. Purgert, P. Rawls, Advanced Materials and Processes, 8 (2008) 47-49.
9. R. Viswanathan, R. Purgert, S. Goodstine, J. Tanzosh, G. Stanko, and J. Shingledecker: Proceedings of the 5th International Conference on Advances in Materials Technology for Fossil Power Plants, ASM International, Materials Park, 2008.
10. T. Sourmail, Materials Science and Technology, 17 (2001) 1-14.10.1179/026708301101508972 ↗
11. M.P. Brady, Y. Yamamoto, M.L. Santella, P.J. Maziasz, B.A. Pint, C.T. Liu, Z.P. Lu, H. Bei, JOM, 60 (2008) 12-18.10.1007/s11837-008-0083-2 ↗
12. Y. Yamamoto, M.P. Brady, Z.P. Lu, C.T. Liu, M. Takeyama, P.J. Maziasz, B.A. Pint, Metallurgical and Materials Transactions A, 38 (2007) 2737-2746.10.1007/s11661-007-9319-y ↗
13. M.P. Brady, Y. Yamamoto, M.L. Santella, B.A. Pint, Scripta Materialia, 57 (2007) 1117-1120.10.1016/j.scriptamat.2007.08.032 ↗
14. Y. Yamamoto, M. Takeyama, Z.P. Lu, C.T. Liu, N.D. Evans, P.J. Maziasz, M.P. Brady, Intermetallics, 16 (2008) 453-462.10.1016/j.intermet.2007.12.005 ↗
15. Y. Yamamoto, M.L. Santella, M.P. Brady, H. Bei, P.J. Maziasz, Metallurgical and Materials Transactions A, 40 (2009) 1868-1880.10.1007/s11661-009-9886-1 ↗
16. M.P. Brady, Y. Yamamoto, M.L. Santella, L.R. Walker, Oxidation of Metals, 72 (2009) 311-333.10.1007/s11085-009-9161-2 ↗
17. Y. Yamamoto, M.L. Santella, C.T. Liu, N.D. Evans, P.J. Maziasz, M.P. Brady, Materials Science and Engineering: A, 524 (2009) 176-185.10.1016/j.msea.2009.06.043 ↗
18. H. Bei, Y. Yamamoto, M.P. Brady, M.L. Santella, Materials Science and Engineering: A, 527 (2010) 2079-2086.10.1016/j.msea.2009.11.052 ↗
19. M.P. Brady, K.A. Unocic, M.J. Lance, M.L. Santella, Y. Yamamoto, L.R. Walker, Oxidation of Metals, 75 (2011) 337-357.10.1007/s11085-011-9237-7 ↗
20. Y. Yamamoto, M. Govindarajan, M.P. Brady, Scripta Materialia, 69 (2013) 816-819.10.1016/j.scriptamat.2013.09.005 ↗
21. G. Trotter, G. Rayner, I. Baker, P.R. Munroe, Intermetallics, 53 (2014) 120-128.10.1016/j.intermet.2014.04.018 ↗
22. Y. Yamamoto, M.P. Brady, M.L. Santella, H. Bei, P.J. Maziasz, B.A. Pint, Metallurgical and Materials Transactions A, 42 (2011) 922-931.10.1007/s11661-010-0295-2 ↗
23. B.A. Pint, L. Walker, P. Maziasz, M. Brady, Y. Yamamoto, M. Santella, Materials Science Forum, 595 (2008) 725-732.
24. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
25. H. De Cicco, M.I. Luppo, L.M. Gribaudo, J. Ovejero-García, Materials Characterization, 52 (2004) 85–92.10.1016/j.matchar.2004.03.007 ↗
26. P.J. Maziasz, JOM, 41 (1989) 14-20.10.1007/BF03220265 ↗
27. R.W. Swindeman, P.J. Maziasz, E. Bolling, and J.F. King: Development and Evaluation of Advanced Austenitic Alloys, No. CONF-900546-4, Oak Ridge National Laboratory, Oak Ridge, TN, 1990, p. 125.
28. R.W. Swindeman and P.J. Maziasz, The effect of MC forming additions and 10 pct cold work on the high temperature strength of 20Cr-30Ni-Fe alloys, Oak Ridge National Laboratory, Oak Ridge, 1991.
29. Y. Yamamoto, G. Muralldharan, and M.P. Brady: US Patent 20,130,266,477, 2013.
30. Z. Cai, B. Lai, W. Yun, P. Ilinski, D. Legnini, J. Maser, and W. Rodrigues: AIP Conference Proceedings, 2000, p. 472.
31. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, J.J. Jonas, Progress in Materials Science, 60 (2014) 130-207.10.1016/j.pmatsci.2013.09.002 ↗
32. I. Shakhova, V. Dudko, A. Belyakov, K. Tsuzaki, R. Kaibyshev, Materials Science and Engineering: A, 545 (2012) 176-186.10.1016/j.msea.2012.02.101 ↗
33. S. Rajasekhara, P. Ferreira, L. Karjalainen, A. Kyröläinen, Metallurgical and Materials Transactions A, 38 (2007) 1202-1210.10.1007/s11661-007-9143-4 ↗
34. J. Moon, M.-H. Jang, J.-Y. Kang, T.-H. Lee, Materials Characterization, 87 (2014) 12-18.10.1016/j.matchar.2013.10.029 ↗