journal article·2005-04

Analysis of multistep transformations in single-crystal NiTi

A. J. Wagoner Johnson, H. Sehitoglu, R. F. Hamilton, G. Biallas, H. J. Maier, Y. I. Chumlyakov, H. S. Woo

Publisher page

Abstract

The effects of composition and heat treatment on the thermally induced phase-transformation behavior of single-crystal NiTi with compositions of 50.1, 50.4, 50.8, and 51.5 at. pct Ni are presented in this article. Differential scanning calorimetry (DSC) experiments reveal that a heat-treated 50.1 at. pct Ni alloy exhibits an unprecedented multiple-step transformation (MST) on both heating and cooling, with up to four peaks. This behavior is absent in the higher-Ni-content alloys. In polycrystalline NiTi alloys, MSTs have been attributed to microstructure heterogeneities such as grain boundaries and dislocations, which influence precipitation. In-situ scanning electron microscopy (SEM) results show that the MST in the 50.1 at. pct Ni alloy is associated with single-crystal defects such as dendrites and low-angle boundaries. A heterogeneous precipitate distribution is observed in transmission electron microscopy (TEM) images of the same low-Ni alloy, also associated with the defects, creating conditions that have been shown in other studies to promote the MST in polycrystals. These MSTs are not observed for high-Ni single-crystal alloys containing the same defects. In this article, we describe the origin of the extraordinary forward and reverse MSTs in the low-Ni alloy and the absence of the MST in high-Ni alloys. Transformation sequences are proposed based on the contrasting precipitate microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. A. Goyobu, Y. Kawamura, H. Horikawa, and T. Saburi: Mater. Trans. JIM, 1996, vol. 37, pp. 697–702.10.2320/matertrans1989.37.697 ↗
2. D. Treppmann and E. Hornbogen: J. Phys. IV, 1995, vol. 5, pp. 211–16.
3. L. Bataillard and R. Gotthardt: J. Phys. IV, 1995, vol. 5, pp. 647–52.
4. D. Chrobak and H. Morawiec: Scripta Mater., 2001, vol. 44, pp. 725–30.10.1016/S1359-6462(00)00671-0 ↗
5. T. Tadaki, Y. Nakata, and K. Shumizu: Trans. Jpn. Inst. Met., 1987, vol. 28, pp. 883–90.10.2320/matertrans1960.28.883 ↗
6. H. Sehitoglu, R. Hamilton, H.J. Maier, A. Wagoner Johnson, H. Woo, and Y. Chumlyakov: “Detwinning and Hysteresis in NiTi Alloys,” Proceedings from New Trends in Phase Transformation and their Applications to Smart Structures, NATO International Workshop Metz, France April 23–26, 2002.
7. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
8. K. Gall, H. Sehitoglu, Y. Chumlyakov, I.V. Kireeva, and H.J. Maier: Trans. ASME, JEMT, 1999, vol. 121, pp. 28–37.
9. K. Gall, H. Sehitoglu, Y.I. Chumlyakov, and I.V. Kireeva: Acta Mater., 1999, vol. 47, pp. 1203–17.10.1016/S1359-6454(98)00432-7 ↗
10. K. Gall, H. Sehitoglu, Y.I. Chumlyakov, Y.L. Zuev, and I. Karaman: Scripta Mater., 1998, vol. 36, pp. 699–705.10.1016/S1359-6462(98)00236-X ↗
11. Y. Liu and D. Favier: Acta Mater., 2000, vol. 48, pp. 3489–99.10.1016/S1359-6454(00)00129-4 ↗
12. E. Hornbogen, V. Mertinger, and D. Wurzel: Scripta Mater., 2001, vol. 44, pp. 171–78.10.1016/S1359-6462(00)00543-1 ↗
13. Y. Liu and P.G. McCormick: Mater. Trans. JIM, 1996, vol. 37, pp. 691–96.10.2320/matertrans1989.37.691 ↗
14. D. Mari and D.C. Dunand: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2833–47.10.1007/BF02669642 ↗
15. L. Bataillard, J.E. Bidaux, and R. Gotthardt: Phil. Mag. A, 1998, vol. 78, pp. 327–44.10.1080/01418619808241907 ↗
16. J. Khalil-Allafi, X. Ren, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 793–803.10.1016/S1359-6454(01)00385-8 ↗
17. J.I. Kim, Y. Liu, and S. Miyazaki: Acta Mater., 2004, vol. 52, pp. 487–99.10.1016/j.actamat.2003.09.032 ↗
18. H. Sitepu, W.W. Schmahl, J.K. Allafi, G. Eggeler, A. Dlouhy, D.M. Toebbens, and M. Tovar: Scripta Mater., 2002, vol. 46, pp. 543–48.10.1016/S1359-6462(02)00032-5 ↗
19. A. Dloughy, J. Khalil-Allafi, and G. Eggeler: Phil. Mag., 2003, vol. 83, pp. 339–63.10.1080/0141861021000034531 ↗
20. D. Chrobak, D. Stroz, and H. Morawiec: Scripta Mater., 2003, vol. 48, pp. 571–76.10.1016/S1359-6462(02)00475-X ↗
21. T. Grosdidier, A.A. Hazotte, and A. Simon: in High-Temperature Materials for Power Engineering 1990, E. Bachelet, et al., eds., Kluwer, London, 1990, pp. 1271–80.
22. B. Marty, P. Moretto, P. Gergaud, J.L. Lebrun, K. Ostolaza, and V. Ji: Acta Mater., 1997, vol. 45, pp. 791–800.10.1016/S1359-6454(96)00185-1 ↗
23. E. Hornbogen: Acta Metall., 1985, vol. 33, pp. 595–601.10.1016/0001-6160(85)90024-0 ↗
24. E. Hornbogen, V. Mertinger, and D. Wurzel: Scripta Mater., 2001, vol. 44, pp. 171–78.10.1016/S1359-6462(00)00543-1 ↗
25. C. Somsen, H. Zahres, J. Kastner, E.F. Wassermann, T. Kakeshita, and T. Saburi: Mater. Sci. Eng. A, 1999, vols. A273–A275, pp. 310–14.10.1016/S0921-5093(99)00362-7 ↗
26. X. Ren, N. Miura, J. Zhang, K. Ostuka, K. Tanaka, M. Koiwa, T. Suzuki, Y. Chumlyakov, and M. Asai: Mater. Sci. Eng. A, 2001, vol. A312, pp. 196–206.10.1016/S0921-5093(00)01876-1 ↗