journal article·2004-03

Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

T. Connolley, M. J. Starink, P. A. S. Reed

Publisher page

Abstract

Notches were machined in specimens of INCONEL 718 by a broaching process, where differing broaching runs led to differing extents of subsurface deformation and surface roughness. Fatigue tests were carried out at 600 degreesC with a trapezoidal loading waveform at 0.25 Hz. The broaching process that led to the more severe subsurface deformation (but lower surface roughness) showed the worst fatigue performance. Analysis of total strain amplitude in the notch root with the aid of an elasto-plastic finite-element (FE) model showed that the work hardening related to the subsurface deformation caused by the different broaching can account for the difference in fatigue lives. Differences in initiation and growth behavior were seen for the two broached finishes as well as for broached and subsequently polished samples. These differences are discussed in terms of a change in crack growth initiation and growth mechanisms due to the presence of the work-hardened layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. ASM Handbook, 10th ed., vol. 16, Machining, ASM INTERNATIONAL, Metals Park, OH, 1995, pp. 194–211.
2. S.P. Lynch, T.C. Radtke, B.J. Wicks, and R.T. Byrnes: Fatigue Fract. Eng. Mater. Struct., 1994, vol. 17, pp. 313–25.10.1111/j.1460-2695.1994.tb00232.x ↗
3. A. Andrieu, R. Molins, H. Ghonem, and A. Pineau: Mater. Sci. Eng., 1992, vol. A154, pp 21–28.10.1016/0921-5093(92)90358-8 ↗
4. E. Andrieu, G. Hochstetter, R. Molins, and A. Pineau: Proc. 3rd Int. Symp. on Superalloys 718, 625, 706 and Various Derivatives, TMS, Warrendale, PA, 1994, pp. 619–30.10.7449/1994/Superalloys_1994_619_631 ↗
5. H. Ghonem and D. Zheng: Metall. Trans. A, 1992, vol. 23A, pp. 3067–72.10.1007/BF02646124 ↗
6. P. Shahinian and K. Sadananda: Trans. ASME J. Eng. Mater. Technol., 1979, vol. 101, pp. 224–30.10.1115/1.3443681 ↗
7. H. Ghonem, T. Nicholas, and A. Pineau: Fatigue Fract. Eng. Mater. Struct., 1993, vol. 16, pp. 565–76.10.1111/j.1460-2695.1993.tb00767.x ↗
8. H. Ghonem, T. Nicholas, and A. Pineau: Fatigue Fract. Eng. Mater. Struct., 1993, vol. 16, pp. 577–90.10.1111/j.1460-2695.1993.tb00103.x ↗
9. J.P. Pedron and A. Pineau: Mater. Sci. Eng., 1982, vol. 56, pp. 143–56.10.1016/0025-5416(82)90167-7 ↗
10. E. Andrieu, R. Cozar, and A. Pineau: Proc. Superalloy 718—Metallurgy & Applications, TMS, Warrendale, PA, 1989, pp. 241–47.10.7449/1989/Superalloys_1989_241_256 ↗
11. L.A. James: Eng. Fract. Mech., 1986, vol. 25, pp. 305–14.10.1016/0013-7944(86)90127-X ↗
12. M.R. Bache, W.J. Evans, and M.C. Hardy: Int. J. Fatigue, 1999, vol. 21, Suppl. S69-S77.10.1016/S0142-1123(99)00057-2 ↗
13. D. Fournier and A. Pineau: Metall. Trans. A, 1977, vol. 8A, pp. 1095–1105.10.1007/BF02667395 ↗
14. J.C. Healy, L. Grabowski, and C.J. Beevers: Int. J. Fatigue, 1991, vol. 13, pp. 133–38.10.1016/0142-1123(91)90005-J ↗
15. T. Denda, P.L. Bretz, and J.K. Tien: Metall. Trans. A, 1992, vol. 23A, pp. 519–26.10.1007/BF02801169 ↗
16. G.R. Leverant and M. Gell: Trans. TMS-AIME, 1969, vol. 245, p. 1167.
17. J. Reuchet and L. Remy: Mater. Sci. Eng., 1983, vol. 58, pp. 19–32.10.1016/0025-5416(83)90134-9 ↗
18. J. Reuchet and L. Remy: Mater. Sci. Eng., 1983, vol. 58, pp. 33–42.10.1016/0025-5416(83)90135-0 ↗
19. M. Reger and L. Remy: Mater. Sci. Eng., 1988, vol. A101, pp. 47–54.10.1016/0921-5093(88)90049-4 ↗
20. M. Reger and L. Remy: Mater. Sci. Eng., 1988, vol. A101, pp. 55–63.10.1016/0921-5093(88)90050-0 ↗
21. G. Sjoberg, N.-G. Ingesten, and R.G. Carlson: Proc. 2nd Int. Symp. on Superalloy 718, 625 & Various Derivatives, TMS, Warrendale, PA, 1991, p. 603.10.7449/1991/Superalloys_1991_603_620 ↗
22. P.A.S. Reed, F. Hachette, D. Thakar, T. Connolley, and M.J. Starink: Proc. 8th Int. Conf. on Mechanical Behaviour of Materials (ICM8), F. Ellyin and J.W. Provan, eds., Fleming Printing Ltd., Victoria, BC, Canada, 1999, vol. 1, pp. 418–23.
23. T. Connolley, P.A.S. Reed, and M.J. Starink: Proc. 5th Charles Parsons Turbine Conf., Institute of Materials, London, 2000, pp. 982–98.
24. T. Connolley, M.J. Starink, and P.A.S. Reed: Proc. 9th Int. Symp. on Superalloys, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Scirra, eds., TMS, Warrendale, PA, 2000, pp. 435–44.
25. T. Connolley, P.A.S. Reed, and M.J. Starink: Mater. Sci. Eng., 2003, vol. A340, pp. 130–45.
26. T. Connolley: Ph.D. Thesis, University of Southampton, Southampton, 2001.
27. H.F. Merrick: Metall. Trans., 1974, vol. 5, pp. 891–97.10.1007/BF02643144 ↗
28. J.B. Clark and A.J. McEvily: Acta Metall., 1964, vol. 12, pp. 1359–72.10.1016/0001-6160(64)90124-5 ↗
29. S. Floreen and R.H. Kane: Fat. Eng. Mater. Struct., 1980, vol. 2, pp. 401–12.10.1111/j.1460-2695.1979.tb01097.x ↗
30. R.G. Andrews, A.K. Koul, and P. Au: Proc. 2nd Int. Symp. on Superalloy 718, 625 & Various Derivatives, E.A. Loria ed., TMS, Warrendale, PA, 1991, pp. 943–54.10.7449/1991/Superalloys_1991_943_954 ↗
31. J.R. Cahoon, W.H. Broughton, and A.R. Kutzak: Metall. Trans., 1971, vol. 2, pp. 1979–83.10.1007/BF02913433 ↗
32. Z. Mei, C.R. Krenn, and J.W. Morris: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2063–73.10.1007/BF02670678 ↗
33. D. Zheng, A. Rosenberger, and H. Ghonem: Mater. Sci. Eng., 1993, vol. A161, pp. 13–21.10.1016/0921-5093(93)90470-Y ↗