journal article·2005-05

General corrosion of alloy 22: Experimental determination of model parameters from electrochemical impedance spectroscopy data

L. Glen McMillion, D. A. Jones, Adan Sun, Digby D. MacDonald

Publisher page

Abstract

Models used to predict general corrosion damage of Alloy 22 high level nuclear waste (HLNW) containers must be deterministic, relying upon the time-invariant natural laws, because of long time scales involved in the predictions compared with the time over which the corrosion of this alloy has been studied. The point defect model (PDM) is one such model and requires high-accuracy experimental data to determine model parameters that will accurately predict corrosion over the long times required for HLNW disposal. Electrochemical impedance spectroscopy (EIS) and steady-state polarization data were collected in deaerated 4 M NaCl, pH 6 solutions at 30 °C and 60 °C. This work, which was carried out under a quality assurance program, emphasized data reproducibility and adherence to the steady-state condition in order to ensure confluence between theory and experiment. Thus, fresh electrolyte was continuously flowed through test cells allowing test specimens to remain undisturbed for up to 6 weeks during data collection. Parameters for the PDM have been estimated by optimizing the PDM on the impedance data, and the ability of the parameter values to account for the steady-state passive current density and barrier oxide layer thickness has been evaluated using phase space analysis. The calculated impedance gives generally good agreement with experimental data showing that the PDM is a valid approach.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Civilian Radioactive Waste Management System, Management and Operating Contractor, Licensing Application Design Selection Report No. B00000000-01717-4606-00123, Revision 01, ICN 01, Civilian Radioactive Waste Management System, Management and Operating Contractor, Las Vegas, NV, 1999.
2. ASTM Standard B575, ASTM, West Conshohocken, PA, 2002, vol. 02.04.
3. D.S. Dunn and C.S. Brossia: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02548.
4. F. Hua, J. Sarver, J. Jevec, and G. Gordon: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02530.
5. Civilian Radioactive Waste Management System, Management and Operating Contractor, Civilian Radioactive Waste Management System, Management and Operating Contractor Report No. TDR-EBS-MD-000010, Revision 00, ICN 01, Las Vegas, NV, 2000.
6. Civilian Radioactive Waste Management System, Management and Operating Contractor, Civilian Radioactive Waste Management System, Management and Operating Contractor Report No. SDD-UDC-SE-000001, Revision 01, Las Vegas, NV, 2000.
7. G.O. Ilevbare, T. Lian, and J.C. Farmer: Corrosion 2002 Symp., Denver, CO, Apr. 2002, NACE, Houston, TX, paper no. 02539.
8. T.P. Moffatt, H. Yang, F.-R.F. Fan, and A.J. Bard: J. Electrochem. Soc., 1992, vol. 139 (11), pp. 3158–67.10.1149/1.2069049 ↗
9. M. Gojic, D. Marijan, and L. Kosec: Corrosion, 2000, vol. 56 (8), pp. 839–48.10.5006/1.3280587 ↗
10. T.B. Du: Br. Corr. J., 2002, vol. 37 (1), pp. 18–22.10.1179/000705902225002402 ↗
11. K. Sugimoto, S. Matsuda, Y. Ogiwara, and K. Kitamura: J. Electrochem. Soc., 1985, vol. 132 (8), pp. 1791–95.10.1149/1.2114219 ↗
12. T.P. Moffatt and R.M. Latanision: J. Electrochem. Soc., 1992, vol. 139 (7), pp. 1869–79.10.1149/1.2069514 ↗
13. F. Falkenberg, V.S. Raja, and E. Ahlberg: J. Electrochem. Soc., 2001, vol. 148 (4), pp. B123-B137.10.1149/1.1354597 ↗
14. M. Sakashita and N. Sato: Corr. Sci., 1977, vol. 17, p. 473.10.1016/0010-938X(77)90003-8 ↗
15. R.C. Newman: Corr. Sci., 1985, vol. 25, p. 331.10.1016/0010-938X(85)90111-8 ↗
16. I. Olefjord and B.O. Elfstrom: Corrosion, 1982, vol. 38, p. 46.10.5006/1.3577318 ↗
17. C.R. Clayton and Y.C. Lu: J. Electrochem. Soc., 1986, vol. 133, p. 2465.10.1149/1.2108451 ↗
18. K. Hashimoto, K. Asami, and K. Teramoto: Corr. Sci., 1979, vol. 19, p. 3.10.1016/0010-938X(79)90003-9 ↗
19. G. Beranger: Proc. Int. Workshop, Cadarache, France, 2002, European Federation of Corrosion, Publications No. 36, Maney Publishing, London, 2003, pp. xiv-xx.
20. R.B. Rebak and P. Crook: “Influence of the Environment on the General Corrosion Rate of Alloy 22 (N06022),” PVP-Vol. 483, PVP2004-2793, Transportation, Storage, and Disposal of Radioactive Materials—2004, July 25–29, 2004, San Diego, CA.10.1115/PVP2004-2793 ↗
21. D.D. Macdonald: Proc. Int. Workshop, Cadarache, France, 2002, European Federation of Corrosion, Publication No. 36, Maney Publishing, London, 2003, pp. 75–90.
22. L.L. Wong, D.V. Fix, J.C. Estill, R.D. McCright, and R.B. Rebak: Mater. Res. Soc. Symp. Proc., 2003, vol. 757.10.1557/PROC-757-II4.4 ↗
23. E.J.W. Verwey: Physica 2, 1935, pp. 1059–1063.10.1016/S0031-8914(35)90193-8 ↗
24. N. Cabrera and N.F. Mott: Rep. Progr. Phys., 1948, vol. 12, pp. 163–84.10.1088/0034-4885/12/1/308 ↗
25. K.J. Vetter and F. Gorn: Electrochim. Acta, 1973, vol. 18, pp. 321–26.10.1016/0013-4686(73)80036-2 ↗
26. N. Sato and M. Cohen: J. Electrochem. Soc., 1964, vol. 111 (5), pp. 512–19.10.1149/1.2426170 ↗
27. N. Sato and M. Cohen: J. Electrochem. Soc., 1964, vol. 111 (5), pp. 519–22.10.1149/1.2426171 ↗
28. R. Kirchheim: Electrochim. Acta, 1987, vol. 32 (11), pp. 1619–29.10.1016/0013-4686(87)90015-6 ↗
29. C.Y. Chao, L.F. Lin, and D.D. Macdonald: J. Electrochem. Soc., 1981, vol. 128 (6), pp. 1187–94.10.1149/1.2127591 ↗
30. C.Y. Chao, L.F. Lin, and D.D. Macdonald: J. Electrochem. Soc., 1981, vol. 128 (6), pp. 1194–98.10.1149/1.2127591 ↗
31. Digby D. Macdonald: J. Electrochem. Soc., 1992, vol. 139 (12), pp. 3434–49.10.1149/1.2069096 ↗
32. Digby D. Macdonald, Sonia R. Biaggio, and Herking Song: J. Electrochem. Soc., 1992, vol. 139 (1), pp. 170–77.10.1149/1.2069165 ↗
33. Digby D. Macdonald and Mirna Urquidi-Macdonald: J. Electrochem. Soc., 1990, vol. 137 (8), pp. 2395–402.10.1149/1.2086949 ↗
34. Digby D. Macdonald: Pure Appl. Chem., 1999, vol. 17 (6), pp. 951–78.10.1351/pac199971060951 ↗
35. D.D. Macdonald, Adan Sun, Namal Priyantha, and Palitha Jayaweera: J. Electroanalytical Chem., 2004, vol. 572 (2), pp. 421–31.10.1016/j.jelechem.2004.05.032 ↗
36. J.S. Llewelyn Leach and B.R. Pearson: Proc. 7th Int. Congr. on Metallic Corrosion, Rio de Janeiro, Oct. 1978, pp. 151–63.
37. Digby D. Macdonald: Proc. Symp. on Critical Factors in Localized Corrosion, G.S. Frankel and R.C. Newman, eds., The Electrochemical Society, 1992, vol. 92 (9).
38. Petra Keller and Hans-Henning Strehblow: Corr. Sci., 2004, vol. 46, pp. 1939–52.10.1016/j.corsci.2004.01.007 ↗
39. M.F. Montemor, M.G.S. Ferreira, N.E. Hakiki, and M. De Cunha Belo: Corr. Sci., 2000, vol. 42, pp. 1635–50.10.1016/S0010-938X(00)00012-3 ↗
40. Digby D. Macdonald: Pure Appl. Chem., 1999, vol. 17 (6), pp. 951–78.10.1351/pac199971060951 ↗
41. ASTM International, Standard B575, ASTM, West Conshohocken, PA, 2002, vol. 02.04.
42. ASTM G 61-86 (reapproved 1998), ASTM, West Conshohocken, PA.
43. ASTM G5-94 (reapproved 1999), ASTM, West Conshohocken, PA.
44. ASTM E542-01, ASTM, West Conshohocken, PA.
45. G. Englehardt: OLI Systems, private communication, Morris Plains, NJ, 2004.
46. Reference Electrodes Theory and Practice, 1st ed., David J.G. Ives and George J. Janz, eds., Academic Press, New York, 1961, pp. 207–09.
47. Electrochemical Impedance: Analysis and Interpretation, John R. Scully, David C. Silverman, and Martin W. Kendig, eds., ASTM, Philadelphia, PA, 1993, pp. 115–70.
48. L.G. McMillion: Ph.D. Dissertation, University of Nevada, Reno, NV, 2004.
49. V.A. Alves and C.M.A. Brett: Electrochim. Acta, 2002, vol. 47, pp. 2081–91.10.1016/S0013-4686(02)00077-4 ↗
50. ASTM G102-89 (reapproved 1999), ASTM, West Conshohocken, PA.
51. M.A. Rodriguez, R. Carranza, and R. Rebak: Corrosion 2004, NACE, Houston, TX, paper no. 04700.
52. K.J. Evans, L.L. Wong, and R. Rebak: “Determination of the Crevice Repassivation Potential of Alloy 22 by a Potentiodynamic-Galvanostatic-Potentiostatic Method,” PVP-Vol. 483, Transportation, Storage, and Disposal of Radioactive Materials—2004, July 25–29, 2004, San Diego, CA, PVP2004-2794.10.1115/PVP2004-2794 ↗
53. C.-Y. Chao, L.-F. Lin, and D.D. Macdonald: J. Electrochem. Soc. 1982, vol. 129, pp. 1874–79.10.1149/1.2124318 ↗
54. M. Bojinov, G. Fabricus, T. Laitinen, K. Makela, T. Saario, and G. Sundholm: Electrochim. Acta 2000, vol. 45, pp. 2029–48.10.1016/S0013-4686(99)00423-5 ↗