journal article·2000-01Open access

On methane generation and decarburization in low-alloy Cr-Mo steels during hydrogen attack

Sabine M. Schlogl, Erik Van Der Giessen, Yvonne Van Leeuwen

Abstract

Low-carbon, low-alloy Cr-Mo steels may fail by hydrogen attack when they are exposed to high hydrogen pressures at elevated temperatures. During this process, the dissolved hydrogen reacts with the carbides of the steel to form methane in grain boundary cavities. The methane pressure inside these cavities depends on the microstructure of the used steel, which consists of a ferritic matrix and alloy carbides such as M7C3, M23C6, M6C, and M2C. The different phases in the multicomponent system Fe-Cr-Mo-V-C are modeled with the sublattice model. Their Gibbs energies are then used to calculate the equilibrium methane pressure as a function of the microstructure. Driven by the methane pressure, the cavities grow due to grain boundary diffusion and dislocation creep, which is described by analytical relations. This leads to progressive development of damage inside the material but, at the same time, to a decrease of the carbon content in the steel. This reduction depends on, among other factors, the methane pressure and the damage state. As the carbon content also affects the creep parameters, this process of decarburization may accelerate the cavity growth. Model calculations are used to obtain insight into the influence of this decarburization process on damage evolution and the final lifetime.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. P.G. Shewmon: Metall. Trans. A, 1976, vol. 7A, pp. 279–86.10.1007/BF02644468 ↗
2. P.G. Shewmon: Mater. Sci. Technol., 1985, vol. 1, pp. 2–11.10.1179/mst.1985.1.1.2 ↗
3. T.A. Parthasarathy: Acta Metall., 1985, vol. 33, pp. 1673–81.10.1016/0001-6160(85)90162-2 ↗
4. G. Sundararajan and P.G. Shewmon: Metall. Trans. A, 1981, vol. 12A, pp. 1761–75.10.1007/BF02643758 ↗
5. T. Nomura and T. Sakai: ASME Pressure Vessel & Piping Conf. 97, July 27–31, 1997, Orlando, FL, ASME, Fairfield, NJ, pp. 315–24.
6. T.A. Parthasarathy and P.G. Shewmon: Metall. Trans. A, 1984, vol. 15A, pp. 2021–27.10.1007/BF02646836 ↗
7. B.L. Chao, G.R. Odette, and G.E. Lucas: “Kinetics and Mechanisms of Hydrogen Attack in 2.25Cr-1Mo Steel,” ORNI/Sub/82-22276/01, University of California, Santa Barbara, CA, Aug. 1988.
8. M.W.D. van der Burg, E. van der Giessen, and R.C. Brouwer: Acta Mater., 1996, vol. 44, pp. 505–18.10.1016/1359-6454(95)00203-0 ↗
9. R. Lundberg, M. Waldenstrom, and B. Uhrenius: CALPHAD, 1977, vol. 1, pp. 159–99.10.1016/0364-5916(77)90015-3 ↗
10. M. Hillert and L.-I. Staffansson: Acta Chem. Scand., 1970, vol. 24, pp. 3618–26.10.3891/acta.chem.scand.24-3618 ↗
11. B. Sundman and J. Agren: J. Phys. Chem. Solids, 1981, vol. 42, pp. 297–301.10.1016/0022-3697(81)90144-X ↗
12. J.-O. Andersson: Metall. Trans. A, 1988, vol. 19A, pp. 627–36.10.1007/BF02649276 ↗
13. J.-O. Andersson: CALPHAD, 1988, vol. 12, pp. 9–23.10.1016/0364-5916(88)90025-9 ↗
14. W. Huang: Z. Metallkd., 1991, vol. 82, pp. 391–401.
15. W. Huang: Metall. Trans. A, 1991, vol. 22A, pp. 1911–20.10.1007/BF02669859 ↗
16. MTDATA: Metallurgical and Thermochemical Databank, National Physical Laboratory, Teddington, Middlesex, United Kingdom, 1995.
17. H.-M. Shih and H.H. Johnson: Acta Metall., 1982, vol. 30, pp. 537–45.10.1016/0001-6160(82)90234-6 ↗
18. P.G. Shewmon: Acta Metall., 1987, vol. 35, pp. 1317–24.10.1016/0001-6160(87)90013-7 ↗
19. G.R. Odette and S.S. Vagarali: Metall. Trans. A, 1982, vol. 13A, pp. 299–303.10.1007/BF02643320 ↗
20. M. Hillert and M. Jarl: CALPHAD, 1978, vol. 2, pp. 227–38.10.1016/0364-5916(78)90011-1 ↗
21. A. Kroupa, A. Vyrostkova, M. Svoboda, and J. Janovec: Acta Mater., 1998, vol. 46, pp. 39–49.10.1016/S1359-6454(97)00239-5 ↗
22. M.W.D. van der Burg and E. van der Giessen: Acta Mater., 1997, vol. 45, pp. 3047–57.10.1016/S1359-6454(96)00382-5 ↗
23. R.L. Klueh: J. Nucl. Mater., 1974, vol. 54, pp. 41–51.10.1016/0022-3115(74)90074-9 ↗
24. D. Hull and D.E. Rimmer: Phil. Mag., 1959, ser. 8, vol.4, pp. 673–87.10.1080/14786435908243264 ↗
25. E. van der Giessen, M.W.D. van der Burg, A. Needleman, and V. Tvergaard: J. Mech. Phys. Solids, 1995, vol. 43, pp. 123–65.10.1016/0022-5096(94)00059-E ↗
26. T.A. Parthasarathy, H.F. Lopez, and P.G. Shewmon: Metall. Trans. A, 1985, vol. 16A, pp. 1143–49.10.1007/BF02811683 ↗
27. P. Schwarzkopf and R. Kiefer: Refractory Hard Metals, The Macmillan Company, New York, NY, 1953, pp. 104–37.
28. H. Lopez and P.G. Shewmon: Acta Metall., 1983, vol. 31, pp. 1945–50.10.1016/0001-6160(83)90140-2 ↗
29. P. Manolatos: Joint Research Center, Petten, The Netherlands, unpublished research, 1999.
30. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, 1st ed., Pergamon Press, Oxford, United Kingdom, 1982, pp. 62–63.
31. M.W.D. van der Burg and E. van der Giessen: Mater. Sci. Eng. A, 1996, vol. 220, pp. 200–14.10.1016/S0921-5093(96)10465-2 ↗