journal article·2006-03

Microstructure refinement of NiCoCrAIY alloys by laser surface melting

C. Kwakernaak, W. G. Sloof, T. J. Nijdam

Publisher page

Abstract

The surface of a cast γ + β Ni-20Co-19Cr-24Al-0.2Y (at. pct) alloy is melted with 75 MW/m2 laser pulses for five different laser irradiation times and two different alloy surface conditions (different initial alloy reflectivity). Detailed analysis of the chemical composition, microstructure, and phase constitution of the laser-melted and original alloy reveals that after laser surface melting (1) the average size of the β dendrites is much smaller, (2) the Y is distributed more homogeneously as smaller NiY-rich precipitates along γ/β phase and γ/γ grain boundaries, (3) the alloy contains a higher volume fraction of the β phase, (4) the β phase contains less Al and more Cr and has a lower lattice parameter, and (5) the γ phase contains more Al and less Cr and has a higher lattice parameter. Based on both experimental results and model calculations, it is shown that the maximum depth of the melt pool increases with increasing laser irradiation time and decreasing initial alloy reflectivity. The arm spacing of the secondary β dendrites, which also increases with increasing laser irradiation time, is related to the average alloy cooling rate according to the power of −1/3, in agreement with theories on solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. J.H. Wood and E.H. Goldman: in Superalloys II, C.T. Sims, N.S. Stoloff, and W.G. Hagel, (eds.), John Wiley and Sons, New York, NY, 1987, pp. 359–84.
2. R. Mévrel: Mater. Sci. Eng., A, 1989, vol. 120A, pp. 13–24.10.1016/0921-5093(89)90713-2 ↗
3. G.W. Goward: Surf. Coating Technol., 1998, vols. 108–109, pp. 73–79.10.1016/S0257-8972(98)00667-7 ↗
4. J.R. Nicholls: JOM, 2000, vol. 52, pp. 28–35.10.1007/s11837-000-0112-2 ↗
5. Ge Wang, B. Gleeson, and D.L. Douglass: Oxid. Met., 1991, vol. 35, pp. 333–48.10.1007/BF00664707 ↗
6. J.G. Smeggil, A.W. Funkenbusch, and N.S. Bornstein: Thin Solid Films, 1984, vol. 119, pp. 327–35.10.1016/0040-6090(84)90016-6 ↗
7. R. Munoz-Arroyo, D. Clemens, F. Tietz, R. Anton, W.J. Quadakkers, and L. Singheiser: Mater. Sci. Forum, 2001, vols. 369–372, pp. 165–72.10.4028/www.scientific.net/MSF.369-372.165 ↗
8. W.M. Steen: Laser Material Processing, 2nd ed., Springer, London, 1998, pp. 190–243.10.1007/978-1-4471-3609-5_6 ↗
9. K. Nagarathnam and K. Komvopoulos: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 381–90.10.1007/BF02648415 ↗
10. R. Streiff, M. Pons, and P. Mazars: Surf. Coating Technol., 1987, vol. 32, pp. 85–95.10.1016/0257-8972(87)90099-5 ↗
11. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 4th revised ed., Trans Tech Publications, Aedermannsdorf, Switzerland, 1998, pp. 1–139.
12. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2005, vol. 53, pp. 1643–53.10.1016/j.actamat.2004.12.014 ↗
13. R. Autrata, P. Schauer, J. Kvapil, and J. Kvapil: J. Phys. E: Sci. Instrum., 1978, vol. 11, pp. 707–08.10.1088/0022-3735/11/7/028 ↗
14. R.L. Higginson and C.M. Sellars: Worked Examples in Quantitative Metallography, MANEY-Institute of Metals, Minerals and Mining, London, 1991, pp. 31–66.
15. J.T. Armstrong: in Electron Probe Quantitation, K.F.J. Heinrich and D.E. Newbury, eds, Plenum Press, New York, NY, 1991, pp. 261–315.10.1007/978-1-4899-2617-3_15 ↗
16. G.F. Bastin and H.J.M. Heijligers: Scanning, 1990, vol. 12, pp. 225–36.10.1002/sca.4950120408 ↗
17. Z.L. Wang and F.W. Saris: Phys. Lett. A, 1981, vol. 83A, pp. 367–70.10.1016/0375-9601(81)90164-X ↗
18. P.W. Atkins: Physical Chemistry, 5th ed, Oxford University Press, Oxford, United Kingdom, 1994, p. 361.
19. W.F. Ames: Numerical Methods for Partial Differential Equations, 3rd ed., Academic Press, Boston, MA, 1992, pp. 15–24.
20. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
21. N. Dupin and B. Sundman: Scand. J. Metall., 2001, vol. 30, pp. 184–92.10.1034/j.1600-0692.2001.300309.x ↗
22. K.A. Khor and Y.W. Gu: Mater. Sci. Eng., A, 2000, vol. 277A, pp. 64–76.10.1016/S0921-5093(99)00565-1 ↗
23. H. Pantsar and V. Kujanpää: J. Laser Appl., 2004, vol. 16, pp. 147–53.10.2351/1.1710879 ↗
24. Powder diffraction file, 02-1261, from International Center for Diffraction Data (ICDD).
25. Powder diffraction file, 09-0097, from International Center for Diffraction Data (ICDD).
26. D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser, and W.J. Quadakkers: Surf. Coating Technol., 2004, vol. 187, pp. 272–83.10.1016/j.surfcoat.2004.02.018 ↗
27. A. Taylor and R.W. Floyd: J. Inst. Met., 1952, vol. 81, pp. 451–64.
28. C.E. Lowell, R.G. Garlick, and B. Henry: Metall. Trans. A, 1976, vol. 7A, pp. 655–60.
29. G.W.C. Kaye and T.H. Laby: Tables of Physical and Chemical Constants, 16th ed., Longman, Harlow, 1995, p. 274.
30. R. Ferro, G. Zanicchi, and R. Marazza: in Ternary Alloys, a Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds, VCH Publishers, Weinheim, 1993, vol. 8, pp. 58–62.
31. Powder diffraction file, 24-0800, from International Centre for Diffraction Data (ICDD).
32. Powder diffraction file, 20-0655, from International Centre for Diffraction Data (ICDD).
33. A. Frenk and W. Kurz: Mater. Sci. Eng., A, 1993, vol. 173A, pp. 339–42.10.1016/0921-5093(93)90240-F ↗
34. R.W. Cahn and A.L. Greer: in Physical Metallurgy, 4th revised and enhanced edition, R.W. Cahn and P. Haasen, eds., Elsevier Science, Amsterdam, 1996, pp. 1724–830.