Dynamic Micro-Strain Analysis of Ultrafine-Grained Aluminum Magnesium Alloy Using Digital Image Correlation
Source abstract
Abstract
Tensile tests were performed in situ on an ultrafine-grained (UFG) Al-Mg alloy using a micro-tensile module in a scanning electron microscope. The micro-strain evolution was tracked and measured using digital image correlation (DIC). A fine random speckle pattern was required to achieve high resolution and accuracy of strain measurement using DIC. To produce the speckle pattern, a patterning method was developed using electron beam lithography to deposit a gold speckle pattern. The nanoscale feature size of this gold pattern (45 nm) was useful for identifying the micro-strain among individual grains of the UFG Al-Mg alloy. Microstructural aspects of the UFG Al-Mg alloy were revealed by analysis of electron backscattered diffraction (EBSD) patterns. Finally, the effect of the UFG Al-Mg alloy microstructure on the nanoscale deformation mechanism was investigated by combining EBSD and DIC data in a contour map. This combined technique provides a method for direct measurement of micro-strain and is potentially useful for deformation studies of a wide range of nanostructured materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical measurement and interference techniques · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Peters WH, Ranson WF (1982) Digital imaging techniques in experimental stress analysis. Opt Eng 21: 427-432.
2. Sutton MA, Wolters WJ, Peters WH, Ranson WF, McNeill SR (1983) Determination of displacements using an improved digital correlation method. Image Vision Comput 1(3): 1333-1339.10.1016/0262-8856(83)90064-1 ↗
3. Yoneyama S, Kitagawa A, Iwata S, Tani K, Kikuta H (2007) Bridge deflection measurement using digital image correlation. Exp Tech 31: 34-40.10.1111/j.1747-1567.2006.00132.x ↗
4. Tschopp MA, Bartha BB, Porter WJ, Murray PT, Fairchild SB (2009) Microstructure-dependent local strain behavior in polycrystals through in situ scanning electron microscope tensile experiments. Metall Mater Trans A 40: 2363-2368.10.1007/s11661-009-9938-6 ↗
5. Kang J, Ososkov Y, Embury JD, Wilkinson DS (2007) Digital image correlation studies for microscopic strain distribution and damage in dual phase steels. Scr Mater 56: 999-1002.10.1016/j.scriptamat.2007.01.031 ↗
6. Zhou P, Goodson KE (2001) Subpixel displacement and deformation gradient measurement using digital image/speckle correlation (DISC). Opt Eng 40: 1613-1620.10.1117/1.1387992 ↗
7. Kar NK, Hu Y, Ahn B, Nutt SR (2012) Diametral compression of pultruded composite rod. Compos Sci Technol vol 72 (11) 1283-1290.10.1016/j.compscitech.2012.05.001 ↗
8. Berfield TA, Patel JK, Shimmin RG, Braun PV, Lambros J, Sottos NR (2007) Micro- and nanoscale deformation measurement of surface and internal planes via digital image correlation. Exp Mech 47: 51-62.10.1007/s11340-006-0531-2 ↗
9. Jin H, Lu WY, Korellis J, (2008) Micro-scale deformation measurement using the digital image correlation technique and scanning electron microscope imaging. J Strain Analysis 43: 719-727.10.1243/03093247JSA412 ↗
10. Tanaka Y, Naito K, Kishimoto S, Kagawa Y (2011) Development of a pattern to measure multiscale deformation and strain distribution via in situ FE-SEM observations. Nanotechnology 22: 115704.10.1088/0957-4484/22/11/115704 ↗
11. Ahn B, Nutt SR (2010) Strain mapping of Al-Mg alloy with multi-scale grain structure using digital image correlation method. Exp Mech 50: 117-123.10.1007/s11340-008-9211-8 ↗
12. Wang H, Xie H, Li Y, Zhu J (2012) Fabrication of micro-scale speckle pattern and its applications for deformation measurement. Meas Sci Technol 23: 035402.10.1088/0957-0233/23/3/035402 ↗
13. Kammers AD, Daly S (2011) Small-scale patterning methods for digital image correlation under scanning electron microscopy. Meas Sci Technol 22: 125501.10.1088/0957-0233/22/12/125501 ↗
14. Vieu C, Carcenac1 F, Pépin A, Chen Y, Mejias M, Lebib A, Manin-Ferlazzo L, Couraud L, Launois H (2000) Electron beam lithography: resolution limits and applications. Appl Surf Sci vol 164 (1–4): 111–117.10.1016/S0169-4332(00)00352-4 ↗
15. Newbery AP, Ahn B, Topping TD, Pao PS, Nutt SR, Lavernia EJ (2008) Large UFG Al alloy plates from cryomilling. J Mater Process Technol 203(1-3): 37-45.10.1016/j.jmatprotec.2007.09.078 ↗
16. Topping TD, Ahn B, Li Y, Nutt SR, Lavernia EJ (2012) Influence of process parameters on the mechanical behavior of an ultrafine-grained Al alloy. Metall Mater Trans A 43: 505-519.10.1007/s11661-011-0849-y ↗
17. Witkin DB, Lavernia EJ (2006) Synthesis and mechanical behavior of nanostructured materials via cryomilling. Prog Mater Sci 51(1): 1-60.10.1016/j.pmatsci.2005.04.004 ↗
18. Topping T.D., Li Y., Lavernia E.J., Manigandan K., and Srivatsan T.S. (2011) Adv. Mater. Res. 410: 175–86.10.4028/www.scientific.net/AMR.410.175 ↗
19. Sutton MA, Li N, Joy DC, Reynolds AP, Li X (2007) Scanning electron microscopy for quantitative small and large deformation measurements part I: SEM imaging at magnifications from 200 to 10,000. Exp Mech 47: 775-787.10.1007/s11340-007-9042-z ↗
20. Seeger A (2004) Progress and problems in the understanding of the dislocation relaxation processes in metals. Mater Sci Eng A 370: 50-66.10.1016/j.msea.2003.08.072 ↗
21. Lee Z, Radmilovic V, Ahn B, Lavernia EJ, Nutt SR (2010) Tensile deformation and fracture mechanism of bulk bimodal ultrafine-grained Al-Mg alloy. Metall Mater Trans A vol 41A: 795-801.10.1007/s11661-009-0007-y ↗
22. Ahn B, Lavernia EJ, SR Nutt (2008) Dynamic observations of deformation in an ultrafine-grained Al-Mg alloy with bimodal grain structure. J Mater Sci 43: 7403-08.10.1007/s10853-008-2950-1 ↗