Interfacial phenomena and joint strength in resistance microwelding of crossed Au-plated Ni wires
Source abstract
Abstract
Resistance microwelding (RMW) of crossed Au-plated Ni wires has been performed at welding currents from 250 to 800 A and welding times from 1 to 80 ms under 4-kg welding force. The interfacial phenomena and the joint breaking force were investigated using an optical microscope (OM), a scanning electron microscope (SEM), an energy-dispersive X-ray (EDX) spectroscope, and a tensile-shear test. The results showed that mechanisms of joint formation involve brazing at low welding current, brazing and solidstate bonding at medium welding current, and solid-state bonding and fusion welding at high welding current. The joint breaking force first increased with increasing welding current, and after reaching a peak value, subsequently decreased due to recrystallization and softening of the Ni wire. With Au plating on the wire surfaces, the joint breaking force was remarkably improved. Comparisons among the RMW of Au-plated Ni wires, Au-plated Ni sheets, and bare Ni wires are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical Contact Performance and Analysis · Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. K.I. Johson: Introduction to Microjoining, TWI, Abington, United Kingdom, 1985.
2. D. Steinmeier: Welding J., 1998, vol. 77, pp. 39–47.
3. Y. Zhou, S.J. Dong, and K.J. Ely: IEEE/TMS J. Electron. Mater., 2001, vol. 30 (8), pp. 1012–20.10.1007/BF02657726 ↗
4. Y. Zhou, P. Gorman, W. Tan, and K.J. Ely: IEEE/TMS J. Electron. Mater., 2000, vol. 29 (9), pp. 1090–99.10.1007/s11664-004-0270-z ↗
5. K.J. Ely and Y. Zhou: Sci. Technol. Welding Joining, 2001, vol. 6 (2), pp. 63–72.10.1179/136217101101538541 ↗
6. B.H. Chang, M.V. Li, and Y. Zhou: Sci. Technol. Welding Joining, 2001, vol. 6 (5), pp. 273–80.10.1179/136217101101538875 ↗
7. Resistance Welder Manufactures’ Association (RWMA): Resistance Welding Manual, 4th ed., George H. Buchanan Co., Philadelphia, PA, 1989, Sect. 1, 6, pp. 1–4.
8. J. Senkara, H. Zhang, and S.J. Hu: Welding J., 2004, vol. 83, pp. 123–32.
9. R.R. Tummala and E.J. Rymaszewski: Microelectronics Packaging Handbook, Van Nostrand Reinhold, New York, NY, 1989.
10. S.A. Gedeon and T.W. Eagar: Metall. Trans. B, 1986, vol. 17B, pp. 887–901.10.1007/BF02657152 ↗
11. V.E. Ataush, V.I. Stroev, and A.A. Mozga: Welding Int., 2000, vol. 14 (3), pp. 231–35.10.1080/09507110009549170 ↗
12. W. Tan, Y. Zhou, and H.W. Kerr: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2667–76.10.1007/s11661-002-0388-7 ↗
13. V.I. Stroev, V.E. Ataush, and YA.A. Rudzit: Welding Int., 2000, vol. 14 (6), pp. 491–95.10.1080/09507110009549218 ↗
14. V.E. Ataush, E.G. Moskvin, and V.P. Leonov: Welding Int., 1992, vol. 6 (8), pp. 624–27.10.1080/09507119209548253 ↗
15. V.E. Moravskii, V.N. Korzh, and S.P. Svidergol: Automatic Welding, 1980, vol. 33 (9), pp. 24–26.
16. S. Fukomoto and Y. Zhou: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3165–76.10.1007/s11661-004-0061-4 ↗
17. T.B. Massalski: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990, p. 402.
18. M.R. Finlay: Resistance Spot Welding of Metallic Coated Steels and PVD Coated Electrodes, CRC No. 18, Australian Welding Research, Silverwater, NSW, Australia, Oct. 1996, pp. 1–17.
19. T. Saito: Welding Int., 1992, vol. 6 (9), pp. 695–99.10.1080/09507119209548268 ↗