Interface Effects on the Quasi-Static and Impact Toughness of Discontinuously Reinforced Aluminum Laminates
Source abstract
Abstract
Trilayer laminates consisting of two layers of aluminum alloy 7093 surrounding one layer of 7093/SiC/15p were produced via two roll-bonding techniques as well as by adhesive bonding. The effects of systematic changes in interface characteristics (i.e., weak bond via roll bonding with a thin ductile interlayer material, stronger bond via roll bonding without a thin ductile interlayer, and strongest bond via adhesive bonding with a semibrittle material) on the subsequent laminate toughness was studied. The fracture resistance of the laminates and the constituent materials was examined via instrumented Charpy notched impact testing in the crack-arrester orientation as well as by fracture-toughness testing of bend bars tested in the crack-divider and the crack-arrester orientations. The notched impact resistance of the trilayer crack-arrester laminates was found to be greater than both monolithic 7093/SiC/15p and 7093 samples of similar global thickness. The laminated structure promoted crack arrest, deflection, and large-scale deformation of the unreinforced layers, producing R-curve behavior. The tendency for interface delamination was predicted and confirmed based on recent mechanics-based analyses. The trilayer laminate structures tested in the crack-divider orientation exhibited a greater R-curve than either of the 7093/SiC/15p or 7093 samples tested at similar global thickness. Both types of roll-bonded laminates (i.e., stronger interface and weak interface containing a thin metal interlayer) exhibited a greater enhancement in Charpy impact toughness and mode I fracture toughness than did the adhesively bonded (i.e., semibrittle interface) laminates. These relative improvements in toughness were rationalized by estimating the contributions to energy absorption by the delamination and crack bridging in these systems and by the effects of the interface type on these processes. These results are generally relevant to the performance of these materials under impact and under certain blast loading and penetration situations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. J.J. Lewandowski, C. Liu, W.H. Hunt Jr.: Mater. Sci. Eng., A, 1989, vol. 107, pp. 241–5510.1016/0921-5093(89)90392-4 ↗
2. P. Mummery, B. Derby: Mater. Sci. Eng., A, 1991, vol. 135, pp. 221–2410.1016/0921-5093(91)90566-6 ↗
3. T.W. Cline, P. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 199310.1017/CBO9780511623080 ↗
4. M. Manoharan, J.J. Lewandowski: Acta Metall. Mater., 1990, vol. 38, pp. 489–9610.1016/0956-7151(90)90155-A ↗
5. M. Manoharan, J.J. Lewandowski: Mater. Sci. Eng., A, 1992, vol. 150, pp. 179–8610.1016/0921-5093(92)90110-M ↗
6. W.H. Hunt Jr., T.M. Osman, J.J. Lewandowski: JOM, 1993, vol. 45, pp. 30–35
7. S.V. Kamat, J.P. Hirth, R. Mehrabian: Acta Metall. Mater., 1989, vol. 37, pp. 2395–40210.1016/0001-6160(89)90037-0 ↗
8. D.J. Lloyd: Acta Metall. Mater., 1991, vol. 39, pp. 59–7110.1016/0956-7151(91)90328-X ↗
9. A. Mortensen: in Fabrication of Particulates Reinforced Metal Composites, J. Masenauve, F.G. Hamel, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 217
10. T.F. Klimowicz, K.S. Vecchio: in Fundamental Relationships between Microstructure and Mechanical Properties in Metal Matrix Composites, P.K. Liaw, M. Gungor, eds., TMS, Warrendale, PA, 1990, p. 255
11. T.J.A. Doel, M.H. Loretto, P. Bowen: Composites, 1993, vol. 24, pp. 270–7510.1016/0010-4361(93)90174-7 ↗
12. T.J. Downes, J.E. King: Compos., 1993, vol. 24, pp. 276–8110.1016/0010-4361(93)90175-8 ↗
13. Y. Flom, R.J. Arsenault: Acta Metall., 1989, vol. 37, pp. 2413–2310.1016/0001-6160(89)90039-4 ↗
14. I.A. Ibrahim, F.A. Mohamed, E.J. Lavernia: J. Mater. Sci., 1991, vol. 26, pp. 1137–5610.1007/BF00544448 ↗
15. D.L. Davidson: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett, R.J. Arsenault, eds., Academic Press, Boston, MA, 1991, p. 217
16. D.L. Davidson: Composites., 1993, vol. 24, pp. 243–5410.1016/0010-4361(93)90171-4 ↗
17. S.I. Hong, G.T. Gray, J.J. Lewandowski: Acta Metall. Mater., 1993, vol. 41, pp. 2337–5110.1016/0956-7151(93)90314-I ↗
18. R.O. Ritchie: Mater. Sci. Eng., A, 1989, vol. 103, pp. 15–2810.1016/0025-5416(88)90547-2 ↗
19. L. Yost Ellis, J.J. Lewandowski: Mater. Sci. Eng., A, 1994, vol. 183, pp. 59–6710.1016/0921-5093(94)90890-7 ↗
20. D.R. Lesuer, C.K. Syn, O.D. Sherby, J. Wadsworth, J.J. Lewandowski, W.H. Hunt Jr.: Int. Mater. Rev., 1996, vol. 41, pp. 169–9710.1179/imr.1996.41.5.169 ↗
21. S. Lee, J. Wadsworth, O.D. Sherby: J. Comp. Mater., 1991, vol. 25, pp. 842–5310.1177/002199839102500704 ↗
22. E.A. Almond, J.D. Embury, and E.S. Wright: Interfaces in Composites, ASTM STP 452, ASTM, Philadelphia, PA, 1969, p. 10710.1520/STP44702S ↗
23. J.D. Embury, N.J. Petch, A.E. Wraith, E.S. Wright: Trans. Metall. Soc. AIME, 1967, 239, p. 114
24. R.D. Goolsby: Int. Conf. on Composite Materials, TMS, Warrendale, PA, 1978, p. 941
25. J.G. Kaufman: J. Basic Eng. Trans. ASME, 1967, vol. 114, pp. 503–0710.1115/1.3609649 ↗
26. S.D. Antolovich, K. Kasi, and G.R. Chanani: Proc. 1971 National Symp. Fracture Mechanics, ASTM, Philadelphia, PA, 1971, p. 13510.1520/STP38823S ↗
27. Y. Ohashi, J. Wolfenstine, R. Koch, O.D. Sherby: Mater. Sci. Eng., A, 1992, vol. 151, pp. 37–4410.1016/0921-5093(92)90179-5 ↗
28. H.A. Hassan, J.J. Lewandowski, H.M. Abd El-Latif: Metall. Mater. Trans. A, 2004, vol. 35, pp. 45–5210.1007/s11661-004-0107-7 ↗
29. H.A. Hassan, J.J. Lewandowski, H.M. Abd El-Latif: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2291–303.10.1007/s11661-006-0209-5 ↗
30. H.A. Hassan, J.J. Lewandowski, H.M. Abd El-Latif: J. Mater. Sci., 2004, vol. 39, pp. 3063–67.10.1023/B:JMSC.0000025833.03662.34 ↗
31. H.A. Hassan, J.J. Lewandowski: Mater. Sci. Technol., 2007, vol. 23 (12), pp. 1505–1210.1179/174328407X242998 ↗
32. W.H. Hunt Jr., T.J. Rodjom: Adv. Powder Metall., 1992, vol. 9, pp. 21–31
33. ASTM STP E813, ASTM, Philadelphia, PA, 1989
34. M. Manoharan, J.J. Lewandowski: Int. J. Fract.,1989, vol. 40, pp. R31–R3410.1007/BF00963975 ↗
35. ASTM STP E399, ASTM, Philadelphia, PA, 1974
36. ASTM STP E992, ASTM, Philadelphia, PA, 1984
37. A.G. Atkins, Y.W. Mai: Elastic and Plastic Fracture: Metals, Polymers, Ceramics, Composites, Biological Materials, John Wiley & Sons, New York, NY, 1988
38. V.V. Kristic, P.S. Nicholson, R.G. Hoagland: J. Am. Ceram. Soc., 1981, vol. 64, pp. 499–50410.1111/j.1151-2916.1981.tb10313.x ↗
39. A.G. Evans and R. McMeeking: Acta Metall., 1986, vol. 34, pp. 2435–4110.1016/0001-6160(86)90146-X ↗
40. P. Mataga: Acta Metall., 1989, vol. 37, pp. 3349–5910.1016/0001-6160(89)90207-1 ↗
41. M. Bannister, M.F. Ashby, Acta Metall., 1991, vol. 39, pp. 2575–8210.1016/0956-7151(91)90072-9 ↗
42. H.C. Cao, A.G. Evans: Acta Metall., 1991, vol. 39, pp. 2997–300510.1016/0956-7151(91)90032-V ↗
43. J. Cook and J.E. Gordon: Proc. R. Soc. A, 1964, vol. 282, pp. 508–2010.1098/rspa.1964.0248 ↗
44. H.E. Deve, G.R. Odette, R. Mehrabian, A.G. Evans, R. Emaliani, R. Hecht: Acta Metall., 1990, vol. 38, pp. 1491–50210.1016/0956-7151(90)90117-Y ↗
45. F. Zok, S. Jansson, A.G. Evans, V. Nardone: Metall. Trans. A, 1991, vol. 22, p. 210710.1007/BF02669878 ↗
46. T.M. Osman, P.M. Singh, J.J. Lewandowski: Scripta Metall., 1994, vol. 31, pp. 607–1210.1016/0956-716X(94)90152-X ↗
47. Structural Adhesive Film AF-163-2K, Aerospace Technical Data, 3M Company, St. Paul, MN, 1986
48. Aluminum: Properties and Physical Metallurgy, J.E. Hatch, ed., ASM INTERNATIONAL, Materials Park, OH, 1984
49. J. Robinson and A.S. Tetelman: 3rd Int. Conf. on Fracture, ICF3, Munich (paper II), Pergamon Press, New York, NY, 1973, pp. 421–27
50. J.J. Lewandowski, C. Liu, and W.H. Hunt, Jr.: Processing and Properties for Powder Metallurgy Composites, P. Kumar, K. Vedula and A. Ritter, eds., TMS, Warrendale, PA, 1987
51. P.M. Singh, J.J. Lewandowski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2911–2110.1007/BF02669648 ↗
52. K. Kendall: Proc. R. Soc., 1975, vol. 344A, pp. 287–302.10.1098/rspa.1975.0102 ↗
53. M.Y. He, J.W. Hutchinson: Int. J. Solids Struct., 1989, vol. 25, pp. 1053–67.10.1016/0020-7683(89)90021-8 ↗
54. A.M.B. El-Shabasy: Sci. Bull. Fac. Eng. Ain Shams Univ., vol. 39 (2), 2004, pp. 367–81
55. P. Davies: in Advanced Composites, I.K. Partrdge, ed., Elsevier Applied Science, London, 1989, pp. 303–29
56. D.R. Bloyer, K.T. Venkateswara Rao, R.O. Ritchie: Metall. Trans A, 1998, vol. 29A, pp. 2483–9610.1007/s11661-998-0220-0 ↗
57. D.R. Bloyer, K.T. Venkateswara Rao, R.O. Ritchie: Metall. Trans A, 1999, vol. 30A, pp. 633–4210.1007/s11661-999-0055-3 ↗
58. T. Fett, D. Munz: Stress Intensity Factors and Weight Functions for One Dimensional Cracks, Insitut Fur Materialforschung Kernforschungszentrum, Karlsruhe, Germany, 1994
59. T.M. Osman, J.J. Lewandowski: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3937–4710.1007/BF02595642 ↗