Physical Simulation of Deformation and Microstructure Evolution During Friction Stir Processing of Ti-6Al-4V Alloy
Source abstract
Abstract
The feasibility of using high-strain rate (1.475 to 3.942 s−1) hot-torsion testing with a Gleeble® thermomechanical simulator was demonstrated for simulating microstructures consistent with friction stir processing (FSP) of Ti-6Al-4V. The tests were performed on α/β-processed base material at temperatures both above and below the β-transus. Various phenomena including the refinement of α- and β-grains, deformation-induced heating, and deformation instabilities were observed. These tests reproduced the range of microstructures that are observed under FSP processing conditions. The testing methodology can be used for generating constitutive material property equations relevant to computational FSP/friction stir welding models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. R. S. Mishra and Z. Y. Ma, Mater. Sci. Eng. R, 2005, Vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
2. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, December 1991.
3. R.S. Mishra and M.W. Mahoney (2007) Friction Stir Welding and Processing, 1st edition, ASM International, Materials Park.
4. R. Nandan, T. DebRoy, and H. K. D. H. Bhadeshia, Prog. Mater. Sci., 2008, Vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
5. W. M. Thomas and E. D. Nicholas, Materials Design, 1997, Vol. 18, pp. 269–73.10.1016/S0261-3069(97)00062-9 ↗
6. H. K. D. H. Bhadeshia and T. DebRoy, Sci. Technol. Weld. Join., 2009, Vol. 14, pp. 193–96.10.1179/136217109X421300 ↗
7. T. DebRoy and H. K. D. H. Bhadeshia, Sci. Technol. Weld. Join., 2010, Vol. 15, pp. 266–70.10.1179/174329310X12726496072400 ↗
8. R. Rai, A. De, H. K. D. H. Bhadeshia and T. DebRoy, Sci. Technol. Weld. Join., 2011, Vol. 16, pp. 325–42.10.1179/1362171811Y.0000000023 ↗
9. D. Fairchild, A. Kumar, S. Ford, N. Nissley, R. Ayer, H. Jin, and A. Ozekcin: in Proceedings of 8 th International Conference on Trends in Welding Research, S.A. David, T. DebRoy, J.N. Dupont, T. Koseki, and H.B. Smartt, eds., ASM International, Materials Park, 2009, pp. 371–80.
10. T. F. A. Santos, T. F. C. Hemenegildo, C. R. M. Afonso, R. R. Marinho, M. T. P. Paes, A. J. Ramirez, Eng. Fract. Mech., 2010, Vol. 77, pp. 2937–45.10.1016/j.engfracmech.2010.07.022 ↗
11. B. Thompson and S. S. Babu, Weld. J., 2010, Vol. 89, pp. 256s–61s.
12. T. G. Santos, P. Vilaca, R. M. Miranda, J. Mater. Process. Technol.., 2011, Vol. 211, pp. 174–80.10.1016/j.jmatprotec.2010.08.030 ↗
13. Y. Mashiko, Y. Hatsukade, T. Yasui, H. Takenaka, Y. Todaka, M. Fukumoto, and S. Tanaka Physica C, 2010, Vol. 470, pp. 1524–28.10.1016/j.physc.2010.05.154 ↗
14. R. Nandan, G. G. Roy, T. J. Lienert and T. DebRoy, Acta Mater., 2007, Vol. 55, pp. 883–95.10.1016/j.actamat.2006.09.009 ↗
15. P. A. Colegrove and H. R. Shercliff, Sci. Technol. Weld. Join., 2006, Vol. 11, pp. 429–41.10.1179/174329306X107700 ↗
16. P. A. Colegrove and H. R. Shercliff, J. Mater. Process. Technol., 2005, Vol. 169, pp. 320–27.10.1016/j.jmatprotec.2005.03.015 ↗
17. H. Schmidt and J. Hattel, Model. Simul. Mater. Sci. Process., 2005, Vol. 13, pp. 77–93.10.1088/0965-0393/13/1/006 ↗
18. H. Schmidt, J. Hattel, and J. Wert, Model. Simul. Mater. Sci. Process., 2004, Vol. 12, pp. 143–57.10.1088/0965-0393/12/1/013 ↗
19. A. Arora, T. DebRoy, and H. K. D. H. Bhadeshia, Acta Mater., 59 (2011) 2020–28.10.1016/j.actamat.2010.12.001 ↗
20. S. Xu, X. Deng, A. P. Reynolds, and T. U. Seidel, Sci. Technol. Weld. Join., 6 (2001) 191–93.10.1179/136217101101538640 ↗
21. P. Ulysse, Int. J. Mach. Tool Manuf., 2002, Vol. 42, pp. 1549–57.10.1016/S0890-6955(02)00114-1 ↗
22. O. Frigaard, O. Grong, and O. T. Midling, Metall. Mater. Trans. A, 2001, Vol. 32, pp. 1189–1200.10.1007/s11661-001-0128-4 ↗
23. S. G. Lambrakos and R. W. Fonda, Sci. Technol. Weld. Join., 2002, Vol. 7, pp. 177–81.10.1179/136217102225002646 ↗
24. P. Dong, F. Lu, J. K. Hong, Z. Cao (2001) Sci. Technol. Weld. Join. 6: 281–87.10.1179/136217101101538884 ↗
25. J. Luo, J. Luo, M. Li, H. Li, W. Lu, Mater. Sci. Eng. A, 2009, Vol. 505 pp. 88–95.10.1016/j.msea.2008.11.001 ↗
26. A. Momeni and S. M. Abbasi, Materials and Design, 2010, Vol. 31, pp. 3599–3604.10.1016/j.matdes.2010.01.060 ↗
27. S. M. Abbasi and A. Momeni, Trans. Nonferrous Met. Soc. China, 2011, Vol. 21, pp. 1728–34.10.1016/S1003-6326(11)60922-9 ↗
28. K. P. Rao, Y. K. D. V. Prasad and E. B. Hawbolt, J. Mater. Process. Technol., 1996, Vol. 56 pp. 897–907.10.1016/0924-0136(95)01902-2 ↗
29. K. P. Rao, Y. K. D. V. Prasad and E. B. Hawbolt, J. Mater. Process. Technol., 1996, Vol. 56, pp. 908–17.10.1016/0924-0136(95)01903-0 ↗
30. F. D. Fischer, E. R. Oberaigner and K. Tanaka, Comput. Mater. Sci., 1997, Vol. 9, pp. 56–63.10.1016/S0927-0256(97)00058-X ↗
31. X. G. Gan and H. Yang, Int. J. Plast., 2011, Vol. 27, pp. 1833–52.10.1016/j.ijplas.2011.05.008 ↗
32. A. Gilat and X. Wu, Int. J. Plast., 1997, Vol. 13, pp. 611–32.10.1016/S0749-6419(97)00028-4 ↗
33. Y. V. R. K. Prasad, T. Seshacharyulu, S. C. Medeiros, W. G. Frazier, J. T. Morgan, and J. C. Malas, Mater. Sci. Technol., 2000, Vol. 16, pp. 1029–36.10.1179/026708300101508829 ↗
34. P. Wanjara, M. Jahazi, H. Moajati and S. Yue, Mater. Sci. Eng. A., 2006, Vol. 416, pp. 300–11.10.1016/j.msea.2005.10.042 ↗
35. U. F. Kocks, Mater. Sci. Eng. A., 2001, Vol. 317, pp. 181–87.10.1016/S0921-5093(01)01174-1 ↗
36. F. J. Zerili, Metall. Mater. Trans. A, 2004, Vol. 35A, pp. 2547–55.10.1007/s11661-004-0201-x ↗
37. D. J. Steinberg, S. G. Cochran and M. W. Guinan, J. Appl. Phys., 1980, Vol. 51, pp. 1498–1504.10.1063/1.327799 ↗
38. G.R. Johnson and W.H. Cook: Proceedings of the 7 th International Symposium on Ballistics, 1983, pp. 541–47.
39. H.J. Frost and M.F. Ashby (1982) Deformation Mechanism Maps. Pergamon Press, Oxford.
40. K. E. Tello, A. P. Gerlich and P. F. Mendez, Sci. Technol. Weld. Join., 2010, Vol. 15, pp. 260–66.10.1179/136217110X12665778348380 ↗
41. P. F. Mendez, K. E. Tello, T. J. Lienert, Acta Mater., 2010, Vol. 58, pp. 6012–26.10.1016/j.actamat.2010.07.019 ↗
42. S. H. Zahiri, C. H. J. Davies, and P. D. Hodgson, Scripta Mater., 2005, Vol. 52, pp. 299–304.10.1016/j.scriptamat.2004.10.011 ↗
43. A. L. Pilchak, W. Tang, H. Sahiner, A. P. Reynolds, and J. C. Williams, Metall. Mater. Trans. A., 2011, 42A, pp. 745–62.10.1007/s11661-010-0439-4 ↗
44. A. L. Pilchak and J. C. Williams, Metall. Mater. Trans. A., 42A (2011) 773–94.10.1007/s11661-010-0434-9 ↗
45. A. H. Cottrell, J. Iron Steel Inst., 1945, Vol. 151, pp. 93–104.
46. H.-G. Lambers, D. Canadinc and H. J. Maier, Mater. Sci. Eng. A, 2012, Vol. 541 pp. 73–80.10.1016/j.msea.2012.02.004 ↗
47. M. Rubal: M.S. Thesis, The Ohio State University, Columbus, 2009.
48. S. Norton: Ph.D. Thesis, The Ohio State University, Columbus, 2006.
49. J. O. Andersson, T. Helander, L. Höglund, P. F. Shi and B. Sundman, CALPHAD, 2002, Vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
50. S. S. Babu, International Materials Reviews, 2009, Vol. 54, pp. 333–67.10.1179/095066009X12506720908654 ↗
51. W. Pantleon, J.T.R. Trotzschel, and P. Klimanek: J. Phys IV France, 1997, vol. 7, pp. C3-649–C3-654.10.1051/jp4:19973111 ↗
52. P. Larour. J. Noack, and W. Bleck (2009) MP Mater. Test. 51:184–98.10.3139/120.110025 ↗
53. T. R. Bieler and S. L. Semiatin, Int. J. Plast., 2002, Vol. 18, pp. 1165–89.10.1016/S0749-6419(01)00057-2 ↗
54. S.S. Babu, S.M. Kelly, E.D. Specht, T.A. Palmer, and J.W. Elmer: Proceedings of International Conference on Solid–Solid Phase Transformations, vol. 2, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., 2005, pp. 503–08.
55. N. V. Lopatin, G. A. Salishchev and S. P. Galkin, Russ. J. Non-Ferrous Met., 2011, Vol. 52, pp. 442–47.10.3103/S1067821211050075 ↗
56. W. Woo, Z. Feng, X. L. Wang, D. W. Brown, B. Clausen, K. An, H. Choo, C. R. Hubbard, and S. A. David, Sci. Technol. Weld. Join., 2007, Vol. 12, pp. 298–303.10.1179/174329307X197548 ↗
57. X. Liu, C. Tan, J. Zhang, F. Wang, H. Cai., Int. J. Impact Eng., 2009, Vol. 36, pp. 1143–49.10.1016/j.ijimpeng.2008.12.007 ↗
58. S. Liao and J. Duffy, Mech. Phys. Solids, 1998, Vol. 46, pp. 2201–31.10.1016/S0022-5096(98)00044-1 ↗
59. T. Seshacharyulu, S. C. Medeiros, W. G. Frazier and Y. V. R. K. Prasad, Mater. Sci. Eng. A, 2000, Vol. 284, pp. 184–94.10.1016/S0921-5093(00)00741-3 ↗
60. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Science/Engineering/Math; 3rd ed., April 1, 1986.
61. V. D. Manvatkar, A. Arora, A. De, and T. DebRoy, Sci. Technol. Weld. Join., 2012, Vol. 17, pp. 460–66.10.1179/1362171812Y.0000000035 ↗
62. C.I. Chang, C.J. Lee, J.C. Huang (2004) Scripta Mater. 51:509–14.10.1016/j.scriptamat.2004.05.043 ↗
63. L. He, A. Dehghan-Manshadi and R. J. Dippenaar, Mater. Sci. Eng. A, 2012, Vol. 549, pp. 163–67.10.1016/j.msea.2012.04.025 ↗
64. N. Gey, P. Bocher, E. Uta, L. Germain, and M. Humbert, Acta Mater., 2010, Vol. 60, pp. 2647–55.10.1016/j.actamat.2012.01.031 ↗