journal article·2009-06

Deformation and Microstructure Evolution in Co-Ni-Cr-Mo Superalloy during Hot Working

Ika Kartika, H. Matsumoto, A. Chiba

Publisher page

Abstract

Deformation and microstructure evolution in Co-33Ni-20Cr-10Mo superalloy during hot deformation are studied by carrying out compression tests between 950 °C and 1200 °C with an increment of 50 °C at strain rates of 0.1, 1, 10, and 30 s−1. The flow curves obtained for the aforementioned strain rates in this temperature range show that this alloy has high work-hardening characteristics; this is due to the strong dislocation-solute interactions associated with dynamic strain aging (DSA). Microstructures deformed at temperatures up to 1050 °C consist of numerous deformation twins and highly dense dislocations, which are attributed to the high activation energy for deformation and the relatively low strain-rate sensitivity m in the temperature range of 950 °C to 1200 °C. Dynamic recrystallization (DRX), which is dependent on the strain rate, occurs at T = 1000 °C, 1050 °C, 1100 °C, 1150 °C, and 1200 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J.P. Immarigeon, K. Rajan, and W. Wallace: Metall. Trans. A, 1984, vol. 15A, pp. 339–45.10.1007/BF02645120 ↗
2. A. Chiba, X.G. Li, and M.S. Kim: Philos. Mag., 1999, vol. 79, pp. 1533–54.10.1080/01418619908210378 ↗
3. M.A. Meyers, O. Vohringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
4. R.E. Reed Hill, J.P. Hirth, and H.C. Rogers: Deformation Twinning, Gordon and Breach, New York, 1964, p. 7.
5. P. Mullner, C. Solenthaler, and M.O. Speidel: Acta Mater., 1994, vol. 42, pp. 1727–32.10.1016/0956-7151(94)90382-4 ↗
6. G. Gottstein, H. Mecking, and D. Zabardjadi: Proc. 4th Int. Conf. Strength of Metals and Alloys, Nancy, France, 1976, pp. 1126–34.
7. R. Raj: Trans. AIME, 1981, vol. 12, pp. 1089–97.
8. C.E. Campbell, W.J. Boettinger, and U.R. Kattner: Acta Mater., 2002, vol. 50, pp. 775–92.10.1016/S1359-6454(01)00383-4 ↗
9. H.J. McQueen and N.D. Ryan: Mater. Sci. Eng., 2002, vol. 322, pp. 43–63.10.1016/S0921-5093(01)01117-0 ↗
10. M.C. Somani, K. Muraleedharan, Y.V.R.K. Prasad, and V. Singh: Mater. Sci. Eng., 1998, vol. 245, pp. 88–99.10.1016/S0921-5093(97)00698-9 ↗
11. S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R. Srinivasan: Mater. Sci. Eng., 2000, vol. 293, pp. 198–207.10.1016/S0921-5093(00)01053-4 ↗
12. A.A. Guimares and J.J. Jonas: Metall. Trans. A, 1981, vol. 12A, pp. 1655–66.10.1007/BF02643571 ↗
13. A. Kelly and R.B. Nicholson: Progr. Mater. Sci., 1967, vol. 10, p. 984.
14. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw Hill Book Co., New York, NY, 1976, pp. 138.
15. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 895–905.10.1007/s11661-005-0284-z ↗
16. R. Ebrahimi, A. Najafizadeh, and R. Shateri: Proc. 81st Steel Symp., Iranian Institute for Iron and Steel, Isphahan, Iran, 2003, pp. 230–37.
17. A. Van Den Beukel and U.F. Kocks: Acta Mater., 1982, vol. 30, pp. 1027–34.10.1016/0001-6160(82)90211-5 ↗
18. F. Montheillet and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3346–48.10.1007/BF02663887 ↗
19. T. Chunfeng, P. Feng, Q. Xuanhui, D. Baihua, W. Tianjian, and H. Xinbo: Rare Met., 2008, vol. 27, pp. 292–98.10.1016/S1001-0521(08)60132-1 ↗
20. X. Yourong, C. Liangshen, J. Lei, and W. Deying: Proc. 2nd Int. Conf., Intelligent Processing and Manufacturing of Materials, IPMM, Honolulu, 1999, vol. 2, pp. 805–10.10.1109/IPMM.1999.791490 ↗
21. M.J. Weis, M.C. Mataya, S.W. Thompson, and D.K. Matlock: in Superalloy 71- Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, p. 135.10.7449/1989/Superalloys_1989_135_154 ↗
22. C.I. Garcia, G.D. Wang, D.E. Camus, E.A. Loria, and A.J. DeArdo: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, eds., TMS, Warrendale, PA, 1994, p. 293.10.7449/1994/Superalloys_1994_293_302 ↗
23. L.X. Zhou and T.N. Baker: Mater. Sci. Eng., 1994, vol. A177, pp. 1–9.10.1016/0921-5093(94)90472-3 ↗
24. W. Chen and M.C. Chaturvedi: Mater. Sci. Eng., 1994, vol. A183, pp. 81–89.10.1016/0921-5093(94)90892-3 ↗
25. S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R. Srinivasan: Scripta Mater., 2000, vol. 42, pp. 17–23.10.1016/S1359-6462(99)00316-4 ↗
26. D.W. Livesey and C.M. Sellars: Mater. Sci. Technol., 1985, vol. 1, pp. 136–44.10.1179/mst.1985.1.2.136 ↗
27. G. Shen, S.L. Semiatin, and R. Shivpuri: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1795–1803.10.1007/BF02670767 ↗
28. T. Sakai and M. Ohashi: Mater. Sci. Technol., 1990, vol. 6, pp. 1251–57.10.1179/mst.1990.6.12.1251 ↗