In-Situ Synchrotron Characterization of Transformation Sequences in TiNi-Based Shape Memory Alloys during Thermal Cycling
Source abstract
Abstract
In-situ synchrotron radiation has been used to provide direct analysis of the transformation sequences in TiNi-based shape memory alloys during thermal cycling. The high resolution, narrow peak width Debye–Scherrer diffraction spectra enabled positive identification and quantification of the phase transformation sequences, which is not possible through normal laboratory studies. The results facilitate a clearer understanding of the development and influence of intermediate phases such as R or B19 on sequential martensitic transformations. Ti50.2Ni49.8 transformed predominately via a single-step B2 ↔ B19′ transformation, although evidence of the R phase was found during cooling in every cycle. The martensitic start temperature was depressed by ~0.6 °C per cycle, while the R-phase start temperature was found to be unaffected. Ti50Ni41Cu9 transformed through a two-step B2 ↔ B19 ↔ B19′ sequence, with the B2 → B19 transformation reaching completion prior to the formation of any B19′. The transformation temperatures of Ti50Ni41Cu9 were found to be insensitive to thermal cycling, remaining constant over the studied cycle range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. K. Otsuka, T. Sawamura, and K. Shimizu: Physica Status Solidi A, 1971, vol. 5, pp. 457–70.10.1002/pssa.2210050220 ↗
2. C.M. Wayman and T.W. Duerig: in Engineering Aspects of Shape Memory Alloys, T.W. Duering, K.N. Melton, D. Stockel, and C.M. Wayman, eds., Butterworth-Heinemann, London, 1990, pp. 3–20.10.1016/B978-0-7506-1009-4.50005-6 ↗
3. T.H. Nam, T. Saburi, and K. Shimizu: Mater. Trans. JIM, 1990, vol. 31, pp. 959–67.10.2320/matertrans1989.31.959 ↗
4. T. Tadaki and C.M. Wayman: Metallography, 1982, vol. 15, pp. 233–58.10.1016/0026-0800(82)90004-0 ↗
5. T. Tadaki and C.M. Wayman: Metallography, 1982, vol. 15, pp. 247–58.10.1016/0026-0800(82)90005-2 ↗
6. N.B. Morgan and C.M. Friend: J. Phys. IV, 2001, vol. 11, pp. 325–32.
7. B. Ye, B.S. Majumdar, and I. Dutta: Appl. Phys. Lett., 2007, vol. 91, p. 061918.10.1063/1.2768899 ↗
8. H. Matsumoto: J. Alloys Compd., 2003, vol. 350, pp. 213–17.10.1016/S0925-8388(02)00982-9 ↗
9. T. Kuita, H. Matsumoto, and H. Abe: J. Alloys Compd., 2004, vol. 381, pp. 158–61.10.1016/j.jallcom.2004.03.108 ↗
10. S. Miyazaki, Y. Igo, and K. Otsuka: Acta Mater., 1986, vol. 34, pp. 2045–51.10.1016/0001-6160(86)90263-4 ↗
11. G.D. Sandrock, A.J. Perkins, and R.F. Hehemann: Metall. Trans., 1971, vol. 2, pp. 2769–81.10.1007/BF02813251 ↗
12. H. Matsumoto: J. Mater. Sci. Lett., 1991, vol. 10, pp. 408–10.10.1007/BF00728048 ↗
13. H.C. Ling and R. Kaplow: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 77–83.10.1007/BF02700440 ↗
14. C. Urbina, S. De la Flor, and F. Ferrando: Mater. Sci. Eng. A, 2009, vol. 501, pp. 197–206.10.1016/j.msea.2008.10.026 ↗
15. J. Uchil, K. Ganesh Kumara, and K.K. Mahesh: Mater. Sci. Eng. A, 2002, vol. 332, pp. 25–28.10.1016/S0921-5093(01)01711-7 ↗
16. V. Pelosin and A. Riviere: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1175–80.10.1007/s11661-998-0244-5 ↗
17. V. Novak, P. Sittner, G.N. Dayananda, F.M. Braz-Fernandes, and K.K. Mahesh: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 127–33.10.1016/j.msea.2007.02.162 ↗
18. A.S. Paula, K.K. Mahesh, C.M.L. dos Santos, F.M. Braz-Fernandes, and C.S. da Costa Viana: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 146–50.10.1016/j.msea.2007.02.142 ↗
19. T. Fukuda, T. Saburi, K. Doi, and S. Nenno: Mater. Trans. JIM, 1992, vol. 33, pp. 271–72.10.2320/matertrans1989.33.271 ↗
20. T.H. Nam, G.S. Ha, H.W. Lee, and S.G. Hur: Mater. Sci. Technol., 2000, vol. 16, pp. 1017–21.10.1179/026708300101508801 ↗
21. L. Rong, D.A. Miller, and D.C. Lagoudas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2689–93.10.1007/s11661-001-1021-x ↗
22. H. Miyamoto, T. Taniwaki, T. Ohba, K. Otsuka, S. Nishigori, and K. Kato: Scripta Mater., 2005, vol. 53, pp. 171–75.10.1016/j.scriptamat.2005.03.044 ↗
23. H.C. Ling and R. Kaplow: Metall. Mater. Trans. A, 1981, vol. 12A, pp. 2101–11.10.1007/BF02644180 ↗
24. J. Uchil, F.M. Braz-Fernandes, and K.K. Mahesh: Mater. Characterization, 2007, vol. 58, pp. 243–48.10.1016/j.matchar.2006.04.022 ↗
25. M. Pattabi, K. Ramakrishna, and K.K. Mahesh: Mater. Sci. Eng. A, 2007, vol. 448, pp. 33–38.10.1016/j.msea.2006.09.052 ↗
26. H. Sitepu, W.W. Schmahl, G. Eggeler, J. Khalil Allafi, and D.M. Tobbens: J. De Phys. IV, 2003, vol. 112, pp. 643–46.10.1051/jp4:2003965 ↗
27. S.L. Raghunathan, M.A. Azeem, D. Collins, and D. Dye: Scripta Mater., 2008, vol. 59, pp. 1059–62.10.1016/j.scriptamat.2008.07.014 ↗
28. R.J. Talling, R.J. Dashwood, M. Jackson, S. Kirumoto, and D. Dye: Scripta Mater., 2008, vol. 59, pp. 669–72.10.1016/j.scriptamat.2008.05.022 ↗
29. A.M. Stapleton, S.L. Raghunathan, I. Bantounas, H.J. Stone, T.C. Lindley, and D. Dye: Acta Mater., 2008, vol. 56, pp. 6186–96.10.1016/j.actamat.2008.08.030 ↗
30. S.L. Raghunathan, A.M. Stapleton, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2007, vol. 55, pp. 6861–72.10.1016/j.actamat.2007.08.049 ↗
31. A.P. Hammersley, S.O. Svensson, and A. Thompson: Nucl. Instrum. Methods, 1994, vol. 346, pp. 312–21.10.1016/0168-9002(94)90720-X ↗
32. A.C. Larson and R.B. Von Dreele: General Structural Analysis System (GSAS), Los Alamos National Laboratory, Los Alamos, NM, 2004.
33. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50, pp. 511–78.10.1016/j.pmatsci.2004.10.001 ↗
34. B. Ye, B.S. Majumdar, and I. Dutta: Acta Mater., 2009, vol. 57, pp. 2403–17.10.1016/j.actamat.2009.01.032 ↗
35. T. Saburi: in Shape Memory Materials, K. Otsuka and C.M. Wayman, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 49–96.
36. W.J. Moberly and K.N. Melton: in Engineering Aspects of Shape Memory Alloys, T.W. Duerig, K.N. Melton, D. Stockel, and C.M. Wayman, eds., Butterworth-Heinemann, London, 1990, pp. 46–57.10.1016/B978-0-7506-1009-4.50008-1 ↗
37. R.H. Bricknell, K.N. Melton, and O. Mercier: Metall. Mater. Trans. A, 1979, vol. 10A, pp. 693–97.10.1007/BF02658390 ↗
38. Y.C. Lo, S.K. Wu, and H.E. Horng: Acta Mater., 1993, vol. 41, pp. 747 –59.10.1016/0956-7151(93)90007-F ↗
39. T. Ohba, T. Taniwaki, H. Miyamoto, K. Otsuka, and K. Kato: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 480–84.10.1016/j.msea.2006.02.167 ↗
40. V. Antonucci, G. Faiella, M. Giordano, F. Mennalla, and L. Nicolais: Thermochim. Acta, 2007, vol. 462, pp. 64–69.10.1016/j.tca.2007.05.024 ↗