Comprehensive Investigations of the Supersolidus Liquid-Phase Sintering of Two Plastic Mold Steels
Source abstract
Abstract
The processing of plastics, particularly reinforced composites, necessitates the use of corrosion- and wear-resistant materials for tools that come into contact with the polymer. For such applications, plastic mold steels were developed that offer not only a good wear resistance due to the presence of carbides in a martensitic matrix, but also good corrosion resistance provided primarily by a sufficient amount of dissolved chromium. The common processing route for these high-alloyed materials is the hot isostatic pressing (HIP) of gas-atomized powders (PM-HIP). In this context, sintering plays an insignificant role, except for the processing of metal-matrix composites (MMCs). The development of novel wear- and corrosion-resistant MMCs based on plastic mold steels requires knowledge of the sintering behavior of prealloyed powders of such tool steels. It is well known that alloyed powders can be processed by supersolidus liquid-phase sintering (SLPS), a method leading to almost full densification and to microstructures without significant coarsening effects. In this work, two different gas-atomized powders of plastic mold steels were investigated by computational thermodynamics, thermal analysis, sintering experiments, and microstructural characterization. The results show that both powders can be sintered to almost full density (1 to 3 pct porosity) by SLPS in a vacuum or a nitrogen atmosphere. Experimental findings on the densification behavior, nitrogen uptake, and carbide volume fractions are in good agreement with calculations performed by computational thermodynamics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. H. Berns and W. Theisen: Ferrous Materials: Steels and Cast Iron, 1st ed., Springer, Berlin, Germany, 2008, pp. 38–42, 105–08, 358–59.
2. G. Hackl, H. Lenger, J. Sammer, and H. Makovec: Berg-und Hüttenmännische Monatsh., 1995, vol. 140 (1), pp. 68–77.
3. S. Gimenez and I. Iturizza: Powder Metall., 2003, vol. 46 (3), pp. 209–18.10.1179/003258903225008580 ↗
4. I. Aguirre, S. Gimenez, S. Talacchia, T. Gomez-Acebo, and I. Iturriza: Powder Metall., 1999, vol. 42 (4), pp. 353–57.10.1179/003258999665701 ↗
5. S. Talacchia, J.I. San Martin, I. Urrutibeaskoa, S. Jauregi, R. Palma, V. Martinez, and J.J. Urcola: Powder Metall., 1993, vol. 36 (4), pp. 275–80.10.1179/pom.1993.36.4.275 ↗
6. S. Gimenez, C. Zubizarreta, V. Trabadelo, and I. Iturriza: Mater. Sci. Eng., A, 2008, vol. 480 (1–2), pp. 130–37.10.1016/j.msea.2007.06.082 ↗
7. S. Weber and W. Theisen: Materialwiss. Werkstofftech., 2007, vol. 38 (6), pp. 442–52.10.1002/mawe.200700155 ↗
8. R.M. German: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1553–67.10.1007/s11661-997-0217-0 ↗
9. S. Weber and W. Theisen: Materialwiss. Werkstofftech., 2007, vol. 38 (6), pp. 442–52.10.1002/mawe.200700155 ↗
10. R.M. German: Liquid Phase Sintering, Plenum Press, New York, 1985, pp. 65–156.10.1007/978-1-4899-3599-1_4 ↗
11. S. Weber: Doctoral Thesis, Ruhr-Universität Bochum, Institut für Werkstoffe, VDI-Verlag, Düsseldorf, Germany, 2005, pp. 66–76.
12. S. Weber and W. Theisen: Powder Metall., 2006, vol. 36 (4), pp. 355–62.10.1179/174329006X128359 ↗
13. A. Packeisen, W. Theisen, and S. Weber: Proc. Int. Conf. on Hot Isostatic Pressing, HIP ’05, Paris, France, 2005, pp. 1–8.
14. V. Trabadelo, S. Gimenez, T. Gomez-Acebo, and I. Iturriza: Scripta Mater., 2005, vol. 53 (3), pp. 287–92.10.1016/j.scriptamat.2005.04.017 ↗
15. DIN 51004: Bestimmung der Schmelztemperaturen kristalliner Stoffe mit der Differnzthermoanalyse (DTA), Berlin (1994), pp. 1–4.
16. DIN 51007: Differenzthermoanalyse (DTA) - Grundlagen, Berlin (1994), pp. 1–16.
17. DIN EN ISO 6507{1: Härteprüfung nach Vickers, Berlin (1997), pp. 1–96.
18. G. Petzow: Metallographisches, Keramographisches, Plastographisches Ätzen, 6. überarbeitete, Gebrüder Borntraeger, Stuttgart, Germany, 1994, pp. 239, 241.
19. S. Weber and W. Theisen: Tooling Materials and Their Applications from Research to Market: 7th Int. Tooling Conf., M. Rosso, ed., Politecnico di Torino, Torino, Italy, 2006, vol. 1, pp. 541–47.
20. W. Schatt, K.-P. Wieters, and B. Kieback: Pulvermetallurgie—Technologien und Werkstoffe, 2nd ed., Springer Verlag, Berlin, 2007, pp. 133–59.10.1007/978-3-540-68112-0 ↗
21. H. Berns: Wear, 2003, vol. 254, pp. 47–54.10.1016/S0043-1648(02)00300-9 ↗
22. S. Gimenez and I. Iturriza: J. Mater. Process. Technol., 2003, vols. 143–144, pp. 555–60.10.1016/S0924-0136(03)00359-5 ↗