journal article·2004-07

Influence of microstructure on tensile and creep properties of a new castable TiAl-based alloy

M. Grange, J. L. Raviart, M. Thomas

Publisher page

Abstract

Snecma Motors has been working on the development of γ-TiAl low-pressure turbine blades, including manufacturing optimization, castability evaluation of a selected alloy called G4, and heat-treatment optimization of mechanical and physical properties. The objective of this study was to evaluate microstructure variability regarding casting conditions and aluminum content. The response of cast microstructures to hot isostatic pressing (hipping) and subsequent heat treatments was determined and quantified using tensile and creep testing. Such investigations helped define an optimized heat treatment. Tensile and creep property assessment has shown a high-temperature potential for G4 alloy with respect to other γ alloys. The G4 alloy also appears to be more creep resistant than conventional nickel-based superalloys on a specific basis. The enhanced creep properties under the optimized low-temperature treatment are mainly attributed to solid solution strengthening with Re, W, and Si elements and precipitation hardening with primary β phase decorating the primary dendrites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. R.E. Schafrik: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 13–17.
2. N.A. Walker and N.E. Glover: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 19–24.
3. W. Smarsly, H. Baur, G. Glitz, H. Clemens, T. Khan, and M. Thomas: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 25–34.
4. Y.-W. Kim: JOM, 1991, vol. 43 (8), pp. 40–47.10.1007/BF03221103 ↗
5. S.C. Huang and J.C. Chesnutt: in Intermetallic Compounds: Vol. 2, Practice, J.H. Westbrook and R.L. Fleischer, eds., John Wiley & Sons, New York, NY, 1993, pp. 73–90.
6. Y.-W. Kim: JOM, 1994, vol. 46 (7), pp. 30–39.10.1007/BF03220745 ↗
7. H. Clemens, N. Eberhardt, W. Glatz, H.-P. Martinz, W. Knabl, and N. Reheis: Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 277–86.
8. S.C. Huang, D.W. McKee, D.S. Shih and J.C. Chestnutt: JIMIS-6, Sendaï, Japan, June 17–20, 1991.
9. M.M. Keller, V. Aubourg, P.E. Jones, W.J. Porter III, and D. Eylon: 8th World Conf. on Titanium, Birmingham, Oct. 22–26, 1995, The Institute of Materials, London, UK, 1996, pp. 184–91.
10. P. Bartolotta, J. Barett, T. Kelly, and R. Smashey: JOM, 1997, May, pp. 48–50 and 76.10.1007/BF02914685 ↗
11. V. Recina, J. Ahlström, and B. Karlsson: Mater. Characterization, 1997, vol. 38, pp. 297–300.10.1016/S1044-5803(97)00033-8 ↗
12. T. Kumagai and M. Nakamura: Scripta Mater., 1996, vol. 34 (7), pp. 1147–54.10.1016/1359-6462(95)00646-X ↗
13. P.A. McQuay and D. Larsen: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 523–29.
14. D.E. Larsen: Mater. Sci. Eng. A, 1996, vol. A213, pp. 128–33.10.1016/0921-5093(96)10234-3 ↗
15. P.A. McQuay: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 83–90.
16. A. Gilchrist and T.M. Pollock: in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 3–12.
17. H. Baur, D.B. Wortherg, and H. Clemens: Proc. 3rd Int. Symp. on Gamma Titanium Aluminides, San Diego, CA, Mar. 4, 2003, eds., Y.-W. Kim, H. Clemens, A.H. Rosenberger, TMS, Warrendale, PA, 2004, pp. 23–31.
18. E.A. Loria: Intermetallics, 2001, vol. 9, pp. 997–1001.10.1016/S0966-9795(01)00064-4 ↗
19. S. Naka, M. Thomas, A. Bachelier-Locq, and T. Khan: U.S. Patent No. 5,846,345, 1998.
20. S. Naka, M. Thomas, C. Sanchez, and T. Khan: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 313–22.
21. S. Naka, M. Thomas, C. Sanchez, and T. Khan: Proc. 2nd Int. Symp. on Structural Intermetallics, TMS, Warrendale, PA, 1997, pp. 313–22.
22. V. Recina: Mater. Sci. Technol., 2000, vol. 16 (3), pp. 333–40.10.1179/026708300101507749 ↗
23. I. Gil, M.A. Muñoz-Morris, and D.G. Morris: Intermetallics, 2001, vol. 9, pp. 373–85.10.1016/S0966-9795(01)00014-0 ↗
24. C. Verstraete: Ph.D. Thesis, Orsay University, Orsay, Dec. 1998.
25. J. Beddoes, W. Wallace, and L. Zhao: Int. Mater. Rev., 1995, vol. 40 (5), pp. 197–217.10.1179/imr.1995.40.5.197 ↗
26. M. Thomas: Internal Report, ONERA, Chatillon cedex, France MORT 1/00953 Nov. 2000.
27. C.M. Austin, T.J. Kelly, and S.C. Huang: in Titanium 92 Sci. Technol., F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp 1065–73.
28. S. Nishikiori, M. Arai, and K. Matsuda: Iron Steel Inst. Jpn., vol. 39 (2), pp. 195–201.10.2355/isijinternational.39.195 ↗
29. P.K. Wright, S. Gilbert, A. Chaterjee, T. Cook, M.R. Mitchell, and A.H. Rosenberger; in Structural Intermetallics 2001, K.J. Hemker, D.M. Dimidiuk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., TMS, Warrendale, PA, 2001, pp. 315–22.
30. D.A. Wheeler, B. London, and D.E. Larsen: in Titanium 92, F.H. Froes and I. Caplan, eds., TMS, Warrendale, PA, 1993, pp. 1267–74.
31. L.L. Rishel, T.M. Pollock, A.W. Cramb, and D.E. Larsen: Int. Symp. Liquid Metal Processing and Casting, 1997, Feb. Santa Fe, NM, 16–19 feb. 1997, American Vacuum Society, New York, 1997, pp. 214–25.
32. J.P. Kuang, R.A. Harding, and J. Campbell: Int. J. Cast Met. Res., 2000, vol. 13, pp. 125–34.10.1080/13640461.2000.11819395 ↗
33. J.H. Jeon, A.B. Godfrey, P.A. Blenkinsop, W. Voyce, and Y.D. Hahn: Mater. Sci. Eng. A, 1999, vol. 271 (1–2), pp. 128–33.10.1016/S0921-5093(99)00192-6 ↗
34. P.A. McQuay, R. Simpkins, D.Y. Seo, and T.R. Bieler: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimidiuk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 197–208.
35. V. Lupinc, M. Marchionni, G. Onofrio, N. Nazmy, and M. Staubli: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 349–56.
36. Y.-W. Kim and D.M. Dimiduk: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 531–43.
37. M. Yamaguchi: Mater. Sci. Technol., 1992, vol. 8, pp. 299–307.10.1179/mst.1992.8.4.299 ↗
38. M. Thomas, J.-L. Raviart, M. Grange, P. Belaygue, and D. Recorbet: Proc. Turbomat 2002, DLR, Kölm, Germany, 2002, pp. 137–42.
39. M. Thomas and S. Naka: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 633–40.
40. D.R. Johnson, H. Inui, and M. Yamaguchi: Intermetallics 6, 1998, pp. 647–52.10.1016/S0966-9795(98)00056-9 ↗
41. M. De Greaf, N. Biery, L. Rishel, T.M. Pollock, and A. Cramb: in Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimidiuk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 247–54.
42. M. Yamaguchi and H. Inui: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 127–42.
43. N. Saunders: Gamma Titanium Aluminides 1999, Y.-W. Kim, D.M. Dimidiuk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 183–88.
44. A. Menand: Rouen University, Rouen, France, private communication, Feb. 28, 2000.
45. N. Jean: Internal report, Ecole des Mines de Nancy, Nancy, 2002.
46. C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Acta. Metall. 1989, vol. 37, p. 1321.10.1016/0001-6160(89)90162-4 ↗
47. R. Kainuma, V. Kujita, H. Mitsui, I. Ohnuma, and K. Ishida: Intermetallics, 2000, vol. 8, p. 855.10.1016/S0966-9795(00)00015-7 ↗
48. F. Perdrix, M.-F. Trichet, J.-L. Bonnentien, M. Cornet, and J. Bigot: Intermetallics, 2001, vol. 9, pp. 807–16.10.1016/S0966-9795(01)00066-8 ↗
49. M. Grange: Snecma Motors, Villaroche, France, private communication, July 2003.
50. D. Lunström, M. Knuton-Wedel, and B. Karlsson: Proc. 6th Liège Conf., Part III, 1998, vol. 5, pp. Forschungszentrum, Jülich GmbH, Jülich, Germany, 1998, 1229–38.
51. V. Lupinc, W.M. Kim, and M. Maldini: Proc. 6th Liège Conf., Part III, 1998, vol. 5, Forschungszentrum, Jülich GmbH, Jülich, Germany, 1998, pp. 1239–48.