Abnormal Austenite-Ferrite Transformation Kinetics of Ultra-Low-Nitrogen Fe-N Alloy
Source abstract
Abstract
The kinetics of the isochronal austenite ( γ ) → ferrite ( α ) transformation of ultra-low-nitrogen Fe-N alloy were investigated for cooling rates in the range of 5 to 15 Kmin −1 by high-resolution dilatometry. The explored γ → α transformation takes place in the single α -phase region, and the onset temperature of the transformation decreases with increasing applied cooling rate. According to the variation of the ferrite formation rate data, an abnormal transformation mechanism, i.e ., multiply peaked nature with rate maxima appearing at fixed transformed fractions, was recognized. For the later (main) part of the transformation, a phase-transformation model, incorporating site saturation, interface-controlled growth, and an appropriate impingement correction, has been employed to extract the migration velocity of the γ / α interface from the measured data. The thus determined interface migration velocity is approximately constant for all applied cooling rates. The first abnormal part of the transformation was discussed in comparison to the recently observed abnormal phenomena for the γ → α transformation in pure iron and ultra-low-carbon Fe-C alloy. On the basis of the thermodynamic and kinetic results, it is shown that autocatalytic nucleation occurs in the first part of the transformation and that interface-controlled growth prevails for the entire transformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. M. Hillert, B. Sundman: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2299–230810.1007/s11661-002-0353-5 ↗
2. H.I. Aaronson, W.T. Reynolds, G.R. Purdy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1731–4510.1007/s11661-006-0116-9 ↗
3. J. Sietsma, M.G. Mecozzi, M.C. van Bohemen, S. van der Zwaag: Int. J. Mater. Res., 2006, vol. 97, pp. 356–6110.1515/ijmr-2006-0059 ↗
4. J. Agren: Acta Metall. Mater., 1989, vol. 37, pp. 181–8910.1016/0001-6160(89)90277-0 ↗
5. van der Ven and L. Delaey: Prog. Mater. Sci., 1996, vol. 40, pp. 181–26410.1016/0079-6425(96)00002-3 ↗
6. I. Loginova, J. Odqvist, G. Amberg, J. Agren: Acta Mater., 2003, vol. 51, pp. 1327–3910.1016/S1359-6454(02)00527-X ↗
7. H.I. Aaronson, S. Mahajan, G.R. Purdy, M.G. Hall: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2347–5110.1007/s11661-002-0358-0 ↗
8. N. Xiao, M. Tong, Y. Lan, D. Li, Y. Li: Acta Mater., 2006, vol. 54, pp. 1265–7810.1016/j.actamat.2005.10.055 ↗
9. E. Gamsjager, F.D. Fischer, J. Svoboda: Mater. Sci. Eng., 2004, vol. A365, pp. 291–9710.1016/j.msea.2003.09.038 ↗
10. Y.C. Liu, D.J. Wang, F. Sommer, and E.J. Mittemeijer: Acta Mater., 2008, in press, DOI: 10.1016/j.actamat.2008.04.01510.1016/j.actamat.2008.04.015 ↗
11. E. Kozeschnik, E. Gamsjäger: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 94–100
12. Y.C. Liu, F. Sommer, E.J. Mittemeijer: Acta Mater., 2006, vol. 54, pp. 3383–9610.1016/j.actamat.2006.03.029 ↗
13. Y.C. Liu, F. Sommer, E.J. Mittemeijer: Acta Mater., 2003, vol. 51, pp. 507–1910.1016/S1359-6454(02)00434-2 ↗
14. Y.C. Liu, F. Sommer, E.J. Mittemeijer: Philos. Mag. A, 2004, vol. 84, pp. 1853–7610.1080/14786430410001663178 ↗
15. Y.C. Liu, F. Sommer, E.J. Mittemeijer: Acta Mater., 2004, vol. 52, pp. 2549–6010.1016/j.actamat.2004.02.003 ↗
16. E.J. Mittemeijer, M.A.J. Somers: Surf. Eng., 1997, vol. 13, pp. 483–9710.1179/sur.1997.13.6.483 ↗
17. T.A. Kop, J. Sietsma, S. van der Zwaag: Mater. Sci. Eng. A, 2002, vol. 323, pp. 403–0810.1016/S0921-5093(01)01375-2 ↗
18. R.E. Schacherl, P.C.J. Graat, E.J. Mittemeijer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3387–9810.1007/s11661-004-0175-8 ↗
19. Y.C. Liu, F. Sommer, E.J. Mittemeijer: Thermochim. Acta, 2004, vol. 413, pp. 215–22510.1016/j.tca.2003.10.005 ↗
20. ASTME112: Annual Book of ASTM Standards, vol. 03.01, ASTM, Philadelphia, PA, 1988, pp. 297
21. F.J. Humphreys: J. Microsc., 1999, vol. 195, pp. 170–8510.1046/j.1365-2818.1999.00578.x ↗
22. V.F. Richter, V.L. Mülheim: Arch. Eisenhüttenwes., 1972, vol. 4, pp. 303–0910.1002/srin.197201809 ↗
23. C.M. Li, F. Sommer, E.J. Mittemeijer: Mater. Sci. Eng. A, 2002, vol. 325, pp. 307–1910.1016/S0921-5093(01)01459-9 ↗
24. H.A. Wriedt: Phase Diagram of Binary Iron Alloys, Materials Information Society, Materials Park, OH, 1993, p. 459
25. A. Saker, Ch. Leroy, H. Michel, C. Franz: Mater. Sci. Eng. A, 1991, vol. 140, pp. 702–0810.1016/0921-5093(91)90500-M ↗
26. C.L. Magee: Phase Transformations, ASM, Metals Park, OH, 1970, p. 115
27. J.W. Christian: The Theory of Transformation in Metals and Alloys. Part 1, Equilibrium and General Kinetic Theory, Pergamon Press, Oxford, United Kingdom, 1981, p. 476
28. A.T.W. Kempen, F. Sommer, E.J. Mittemeijer: Acta Mater., 2002, vol. 50, pp. 3545–5510.1016/S1359-6454(02)00149-0 ↗
29. E.J. Mittemeijer, F. Sommer: Z. Metallkd., 2002, vol. 93, pp. 352–6110.3139/146.020352 ↗
30. F. Liu, F. Sommer, C. Bos, E.J. Mittemeijer: Int. Mater. Rev., 2007, vol. 52, pp. 193–21210.1179/174328007X160308 ↗
31. B.J. Kooi: Phys. Rev. B, 2004, vol. 70B, p. 22410810.1103/PhysRevB.70.224108 ↗
32. M.J. Starink: J. Mater. Sci., 2001, vol. 36, pp. 4433–4110.1023/A:1017974517877 ↗
33. B.J. Kooi: Phys. Rev. B, 2006, 73B, 05410310.1103/PhysRevB.73.054103 ↗
34. J. Svoboda, E. Gamsjäger, F.D. Fischer: Philos. Mag. Lett., 2005, vol. 85, pp. 473–7910.1080/09500830500333295 ↗
35. M. Onink, F.D. Tichelaar, C.M. Brakman, E.J. Mittemeijer, S. van der Zwaag: J. Mater. Sci., 1995, vol. 30, pp. 6223–3410.1007/BF00369670 ↗
36. M. Hillert: Metall. Trans. A, 1975. vol. 6A, pp. 5–1910.1007/BF02673664 ↗
37. M. Hillert, L. Höglund: Scripta Mater., 2006, vol. 54, pp. 1259–6310.1016/j.scriptamat.2005.12.023 ↗
38. E. Gamsjäger, J. Svoboda, F.D. Fischer: Comput. Mater. Sci., 2005, vol. 32, pp. 360–6910.1016/j.commatsci.2004.09.031 ↗
39. J.J. Wits, T.A. Kop, Y. van Leeuwen, J. Seitsma, S. van der Zwaag: Mater. Sci. Eng. A, 2000, vol. 283, pp. 234–4110.1016/S0921-5093(00)00735-8 ↗
40. G.P. Krielaart, S. van der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–1810.1179/mst.1998.14.1.10 ↗
41. A.T. Dinsdale: Calphad, 1991, vol.15, pp. 317–42510.1016/0364-5916(91)90030-N ↗
42. M. Hillert, M. Jarl: Calphad, 1978, vol. 2, pp. 227–3810.1016/0364-5916(78)90011-1 ↗
43. J.C. Fisher: Acta Metal., 1953, vol. 1, pp. 32–3510.1016/0001-6160(53)90007-8 ↗
44. G. Ghosh, V. Raghavan: Scripta Metall. Mater., 1986, vol. 20, pp. 849–5410.1016/0036-9748(86)90453-9 ↗