Machinability of Green Powder Metallurgy Components: Part I. Characterization of the Influence of Tool Wear
Source abstract
Abstract
The green machining process is an interesting approach for solving the mediocre machining behavior of high-performance powder metallurgy (PM) steels. This process appears as a promising method for extending tool life and reducing machining costs. Recent improvements in binder/lubricant technologies have led to high green strength systems that enable green machining. So far, tool wear has been considered negligible when characterizing the machinability of green PM specimens. This inaccurate assumption may lead to the selection of suboptimum cutting conditions. The first part of this study involves the optimization of the machining parameters to minimize the effects of tool wear on the machinability in turning of green PM components. The second part of our work compares the sintered mechanical properties of components machined in green state with other machined after sintering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. D.S. Madan: Adv. Powder Metall. Part. Mater., 1995, Part 8, pp. 55–67
2. R.J. Causton: Adv. Powder Metall. Part. Mater., 1995, Part 8, pp. 149–70
3. J.S. Agapiou and M.F. DeVeries: Int. J. Powder Metall., 1988, vol. 24 (1), pp. 47–57
4. J.L. Seefelt, D.W. Smith, and P. Machmeier: Adv. Powder Metall. Part. Mater., 1990, vol. 1, pp. 323–40
5. E.M. Trent and P.K. Wright: Metal Cutting, 4th ed., Butterworth-Heinemann, Boston, MA, 2000, pp 149–63
6. R.M. German: Powder Metallurgy and Particulate Processing, Metal Powder Industries Federation, Princeton, NJ, 2005, pp. 335–68
7. C. Blais, G.L’ Espérance, and I. Bourgeois: Powder Metall., 2001, vol. 44, pp. 67–76.10.1179/003258901666194 ↗
8. K.S. Chopra: Adv. Powder Metall. Part. Mater., 1988, pp. 361–79
9. U. Engström: Powder Metall., 1983, vol. 26, pp. 137–44.10.1179/pom.1983.26.3.137 ↗
10. L. Jiang, K. Cui, and H. Hänninen: J. Mater. Process. Technol., 1996, vol. 58, pp. 160–65.10.1016/0924-0136(95)02144-2 ↗
11. E. Robert-Perron, C. Blais, Y. Thomas, S. Pelletier, and M. Dionne: Mater. Sci. Eng. A-Struct., 2005, vol. 402, pp. 325–3410.1016/j.msea.2005.05.019 ↗
12. F. Chagnon, L. Tremblay, S. St-Laurent, and M. Gagné: SAE Technical Paper No. 1999-01-0337, SAE, Warrendale, PA, 1999, pp. 71–76
13. S. St-Laurent and F. Chagnon: Adv. Powder Metall. Part. Mater., 1997, Part 3, pp. 3–18
14. A. Benner and P. Beiss: Euro PM2000 Conf. on Material and Processing Trends for PM Components in Transportation Proceedings, EPMA, Vienna, 2000, pp. 101–09
15. O. Andersson and A. Benner: Adv. Powder Metall. Part. Mater., 2001, Part 6, pp. 16–28
16. M. Ramstedt, O. Andersson, H. Vidarsson, and B. Hu: Adv. Powder Metall. Part. Mater., 2001, Part 12, pp. 151–62
17. A. Benner and P. Beiss: Adv. Powder Metall. Part. Mater., 2001, Part 6, pp. 1–15
18. L. Tremblay and Y. Thomas: Adv. Powder Metall. Part. Mater., 1999, Part 2, pp. 141–56
19. L. Tremblay, J.E. Danaher, F. Chagnon, and Y. Thomas: Adv. Powder Metall. Part. Mater., 2002, Part 12, pp. 123–37
20. Y. Thomas, K.C. Cole, and L. Tremblay: Adv. Powder Metall. Part. Mater., 2001, Part 3, pp. 20–30
21. A. Benner and P. Beiss: Materialwiss. Werkst., 2004, vol. 35, pp. 663–6910.1002/mawe.200400792 ↗
22. Standard 35, Metal Powder Industries Federation, Princeton, NJ, 1998
23. Standard 15, Metal Powder Industries Federation, Princeton, NJ, 1998
24. Kennametal: Lathe Tooling, Catalogue 1010, Latrobe, PA, 2001
25. G. Taguchi: Quality Engineering in Production Systems, McGraw-Hill, New York, NY, 1989
26. P.J. Ross: Taguchi Techniques for Quality Engineering, McGraw-Hill, New York, NY, 1988
27. Mitutoyo: Surface Finish Tester SJ-201P User’s Manual, no. 99MBB079A series no. 178
28. C. Blais and G.L’ Espérance: Powder Metall., 2002, vol. 45, pp. 39–4710.1179/003258902225001597 ↗