A Semianalytical Thermal Model for Fiction Stir Welding
Source abstract
Abstract
The main difficulty in the formulation of any model for friction stir welding (FSW) is due to the high coupling between thermal and mechanical phenomena. In the analytical models present in the literature, the fundamental unknown parameter, under the assumption of sticking between the tool/matrix interface, is the yield shear stress, which is temperature dependent. For this reason, any fully analytical model is unable to predict the temperatures for conditions not supported by measurements of the heat input. In this work a semianalytical thermal model for FSW is proposed. The formulation of heat flow during the welding process is based on generic solutions of the differential equation for heat conduction in a solid body, formulated for a point heat source with constant linear velocity. The heat generation was considered as a function of the tool-matrix interface temperature, which is calculated by means of a numerical routine written in Matlab code. Comparison with the experimental measurements taken from the literature shows that the results from the present semianalytical model are in good agreement with the test data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
2. S. Lim, S. Kim, C.-G. Lee, and S. Kim: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1977–80.10.1007/s11661-005-0060-0 ↗
3. Y. Uematsu, Y. Tozaki, K. Tokaji, and M. Nakamura: Strength Mater., 2008, vol. 40, pp. 138–41.10.1007/s11223-008-0036-6 ↗
4. D. Storjohann, O.M. Barabash, S.S. Babu, S.A. David, P.S. Sklad, and E.E. Bloom: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3237–47.10.1007/s11661-005-0093-4 ↗
5. P. Cavaliere, E. Cerri, L. Marzoli, and J. Dos Santos: Appl. Comp. Mater., 2004, vol. 11, pp 246–58.10.1023/B:ACMA.0000045336.48648.fa ↗
6. P. Dong, F. Lu, J.K. Hong, and Z. Cao: Sci. Technol. Weld. Join., 2001, vol. 6, pp. 281–87.10.1179/136217101101538884 ↗
7. P. Ulysse: Mach. Tool. Manufact., 2002, vol. 42, pp. 1549–57.10.1016/S0890-6955(02)00114-1 ↗
8. P.A. Colegrove and H.R. Shercliff: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 483–92.10.1179/136217104225021832 ↗
9. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 389–96.10.1016/j.msea.2005.09.040 ↗
10. H. Schmidt and J. Hattel: Model. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 77–93.10.1088/0965-0393/13/1/006 ↗
11. L. Fourment and S. Guerdoux: Int. J. Mater. Form Suppl., 2008, vol. 1, pp. 1287–90.10.1007/s12289-008-0138-5 ↗
12. Y.J. Chao, X. Qi, and W. Tang: Trans. ASME, 2003, vol. 125, pp 138–45.
13. X.K. Zhu and Y.J. Chao: J. Mater. Process. Technol., 2004, vol. 146, pp. 263–72.10.1016/j.jmatprotec.2003.10.025 ↗
14. Z. Zhang: J. Mater. Sci., 2008, vol. 43, pp. 5867–77.10.1007/s10853-008-2865-x ↗
15. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 165–74.10.1179/136217103225010943 ↗
16. M.J Russell and H.R Shercliff: 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, 1999.
17. H. Schmidt, J. Hattel, and J. Wert: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 143–57.10.1088/0965-0393/12/1/013 ↗
18. H.B. Schmidt and J.H. Hattel: Scripta Mater., 2008, vol. 58, pp. 332–37.10.1016/j.scriptamat.2007.10.008 ↗
19. P. Vilaca, L. Quintino, and J.F. dos Santos: J. Mater. Process. Technol., 2005, vol. 169, pp. 452–65.10.1016/j.jmatprotec.2004.12.016 ↗
20. P. Vilaca, L. Quintino, J.F. dos Santos, R. Zettler, and S. Sheikhi: Mater. Sci. Eng. A, 2007, vol. 445, pp. 501–08.10.1016/j.msea.2006.09.091 ↗
21. S. Perivilli, J. Peddieson, and J. Cui: J. Heat Transfer, 2008, vol. 130, pp 1–9.10.1115/1.2927401 ↗
22. B.M. Darras and M.K. Khraisheh: J. Mater. Eng. Perform., 2008, vol. 17, pp. 168–77.10.1007/s11665-007-9179-z ↗
23. D. Rosenthal: Weld. J. Res. Supp., 1941, vol. 20, pp. 220–34.
24. D. Rosenthal and H. Shamerber: Weld. J. Res. Supp., 1938, vol. 17, pp. 2–8.
25. ∅. Grong: Metallurgical Modelling of Welding, 2nd ed., Materials Modelling Series, H.K.D.H Bhadeshia, ed., The Institute of Materials, London, 1997, pp. 24–90.
26. http://www.sandmeyersteel.com/304L.html
27. http://www.matweb.com
28. Metals Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM INTERNATIONAL, Metals Park, OH, 1990, pp. 774–76.